Hi, i had a similar problem as reported by Tomi Vainio on 27.09.2002 with a CF-PCMCIA Adapter and a Sandisk 64MB CF Card with NEWCARD on a - -current of ~ 20.09.2002:
(This is a Thinkpad X20) pccard0: Allocation failed for cfe 0 ata2 at port 0x100-0x10f irq 11 function 0 config 1 on pccard0 pccard0: WARNING: Resource not reserved by pccard bus device_probe_and_attach: ata2 attach returned 6 On todays Current i get on Insertion: pccard0: Allocation failed for cfe 0 ata2 at port 0x100-0x10f irq 11 function 0 config 1 on pccard0 ad4: 61MB <SanDisk SDCFB-64> [490/8/32] at ata2-master BIOSPIO On todays Current i get on Boot: pccard0: Allocation failed for cfe 0 ata2 at port 0x100-0x10f irq 11 function 0 config 1 on pccard0 ad0: 19077MB <HITACHI_DK23BA-20B> [41344/15/63] at ata0-master UDMA33 ad4: READ command timeout tag=0 serv=0 - resetting ata2: resetting devices .. done ad4: read interrupt arrived early ad4: read error detected (too) late ad4: <SanDisk SDCFB-64> [490/8/32] at ata2-master BIOSPIO ad4: hard error cmd=read fsbn 104458130 of 0-3 status=51 error=10 ad4: 51004MB <SanDisk SDCFB-64> [21318/70/70] at ata2-master BIOSPIO at that point the kernel hangs :-) If i insert the card after the boot Process i can work on it without any Problems... Stephan - Stephan Holtwisch - [EMAIL PROTECTED] immutec GmbH - Mendelstraße 11 - 48149 Münster Tel: +49(0)251/980-1230 - Fax: +49(0)251/980-1231 www.immutec.com - [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
