On Wed, Oct 30, 2002 at 10:00:29AM -0700, Justin T. Gibbs wrote: > > Can you provide the model number and firmware revision for > this drive? According to the controller, the drive is failing > to respond to a whole slew of commands that we have queued to > it. You might have better luck if you reduce the tag depth > to the disk via camcontrol. >
Here is more from the dmesg about the scsi adapter and the drive . ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xa400-0xa4ff mem 0xe4100000 -0xe4100fff irq 10 at device 8.0 on pci2 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs da0 at ahc0 bus 0 target 3 lun 0 da0: <SEAGATE SX910800N 8514> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 8669MB (17755614 512 byte sectors: 255H 63S/T 1105C) strangely the model number printed on the drive is ST410800N as opposed to what da lists above. the scsi bios also recognizes it as SX910800N always has been only I never noticed.... I have no idea how to get the firmware!! nothing to that effect is printed on the drive there are a whole bunch of other numbers on it tho: part number : 9A7001-035 lot number : K-01-9718-4 serial no. : SH410798 download code revision : 8511 finally a separate sticker with a number and a barcode without any mention of what it is (__may__ be this is the firmware revision) 70768238 Thanks in advance and please keep me posted... regards, Saurabh Gupta To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
