Herro -CURRENT!
I have a Dell Dimension 4500 that included a CNet Pro200WL adapter. I
have 4.6.2-p2 installed on one partition and -CURRENT from earlier today
on another. 4.6.2-p2 has no problem with this card, and while it's
detected under -CURRENT, I can't seem to, well, make it work.
I've attempted to force media types and suboptions to no avail (as
opposed to autoselect).
tcpdump in promiscuous mode shows only ARP requests when this machine
tries to reach another on the subnet. Other machines never see any
segments generated by this one, and 'netstat -i' shows no input / output
errors.
For what it's worth, the following message is broadcast to my console
when trying to configure the interface:
dc0: failed to force tx and rx to idle state
I'm attaching dmesg and pciconf output to this message. Please let me
know what (if any) further information is required.
TIA!
--
ryan beasley <[EMAIL PROTECTED]>
GPG ID: 0x16EFBD48 http://www.goddamnbastard.org
# /var/run/dmesg.boot
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #3: Fri Oct 11 19:54:38 CDT 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/FREDRIK_DP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03cd000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2392297388 Hz
CPU: Pentium 4 (2392.30-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536084480 (523520K bytes)
avail memory = 516149248 (504052K bytes)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 8 entries at 0xc00f44e0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <multimedia, audio> at device 1.0 (no driver attached)
pci2: <input device> at device 1.1 (no driver attached)
dc0: <Davicom DM9102A 10/100BaseTX> port 0xd400-0xd4ff mem 0xfeaffc00-0xfeaffcff irq 9
at device 2.0 on pci2
dc0: Ethernet address: 15:01:15:01:15:01
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at
device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
Timecounters tick every 10.000 msec
Initializing GEOMetry subsystem
ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA100
ad1: 38166MB <WDC WD400BB-00AUA1> [77545/16/63] at ata0-slave UDMA33
acd0: CD-RW <_NEC CD-RW NR-9100A> at ata1-master PIO4
Mounting root from ufs:/dev/ad1s2a
# pciconf -l
agp0@pci0:0:0: class=0x060000 card=0x1a308086 chip=0x1a308086 rev=0x11 hdr=0x00
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x11 hdr=0x01
none0@pci0:29:0: class=0x0c0300 card=0x01321028 chip=0x24c28086 rev=0x01
hdr=0x00
none1@pci0:29:1: class=0x0c0300 card=0x01321028 chip=0x24c48086 rev=0x01
hdr=0x00
none2@pci0:29:2: class=0x0c0300 card=0x01321028 chip=0x24c78086 rev=0x01
hdr=0x00
none3@pci0:29:7: class=0x0c0320 card=0x01321028 chip=0x24cd8086 rev=0x01
hdr=0x00
pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x81
hdr=0x01
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x01
hdr=0x00
atapci0@pci0:31:1: class=0x01018a card=0x01321028 chip=0x24cb8086 rev=0x01
hdr=0x00
none4@pci0:31:3: class=0x0c0500 card=0x01321028 chip=0x24c38086 rev=0x01
hdr=0x00
none5@pci1:0:0: class=0x030000 card=0x013210de chip=0x025310de rev=0xa3 hdr=0x00
none6@pci2:1:0: class=0x040100 card=0x80611102 chip=0x00021102 rev=0x07 hdr=0x00
none7@pci2:1:1: class=0x098000 card=0x00201102 chip=0x70021102 rev=0x07 hdr=0x00
dc0@pci2:2:0: class=0x020000 card=0x434e4554 chip=0x91021282 rev=0x31 hdr=0x00
msg45240/pgp00000.pgp
Description: PGP signature
