GEOM is working so far. I can mount a cd-rom without problems and
permissions are fine. `dmesg' output follows. After that is my kernel
configuration.
There is one problem, not related to GEOM (it's been going on for at
least a month), which follows: whenever I reboot the laptop from
FreeBSD back into FreeBSD it never gets past "Mounting root ..."
The only way I can get it to boot properly is by powering off the
laptop. On the other hand I can boot into Windows Millennium fine
after rebooting from FreeBSD and into FreeBSD from Windows Millennium.
So it seems to just be rebooting from FreeBSD and booting FreeBSD.
<dmesg>
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Oct 2 22:02:06 EDT 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/LAPTOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0438000.
Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc04380a8.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc0438154.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc0438200.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc04382ac.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0438360.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc043840c.
Preloaded elf module "/boot/kernel/accf_data.ko" at 0xc04384b4.
Preloaded elf module "/boot/kernel/accf_http.ko" at 0xc0438564.
Preloaded elf module "/boot/kernel/random.ko" at 0xc0438614.
Preloaded elf module "/boot/kernel/atspeaker.ko" at 0xc04386c0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0438770.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 846325088 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (846.33-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 255889408 (249892K bytes)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
Using $PIR table, 7 entries at 0xc00fdf50
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xec000000-0xefffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 1.0 (no driver attached)
cbb0: <TI1420 PCI-CardBus Bridge> at device 4.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 4 INTA is routed to irq 11
cbb1: <TI1420 PCI-CardBus Bridge> at device 4.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: slot 4 INTA is routed to irq 11
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <ESS Technology Allegro-1> port 0x1400-0x14ff irq 5 at device 8.0 on pci0
pci0: <simple comms> at device 8.1 (no driver attached)
dc0: <Accton EN2242 MiniPCI 10/100BaseTX> port 0x1c00-0x1cff mem 0xe8000000-0xe80003ff
irq 11 at device 16.0 on pci0
dc0: Ethernet address: 00:d0:59:5c:40:f4
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atspeaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x158-0x15f,0x2f8-0x2ff irq 3 drq 0 on acpi0
sio1: type 16550A
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
Initializing GEOMetry subsystem
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1
wi0: 802.11 address: 00:30:ab:15:ea:81
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
wi0: Intersil Firmware: Primary 0.03.00, Station 0.08.03
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
</dmesg>
<config>
machine i386
cpu I686_CPU
ident LAPTOP
maxusers 0
makeoptions DEBUG=-g
options INET
options INET6
options FFS
options SOFTUPDATES
options UFS_DIRHASH
options COMPAT_43
options COMPAT_FREEBSD4
options KTRACE
options SYSVSHM
options SYSVMSG
options SYSVSEM
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV
options INCLUDE_CONFIG_FILE
options DDB
options ATA_STATIC_ID
options RANDOM_IP_ID
options TCP_DROP_SYNFIN
options ZERO_COPY_SOCKETS
options PSM_HOOKRESUME
options PSM_RESETAFTERSUSPEND
options SC_ALT_MOUSE_IMAGE
options SC_HISTORY_SIZE=512
options SC_PIXEL_MODE
options SC_KERNEL_CONS_ATTR="(FG_GREEN|BG_BLACK)"
options SC_TWOBUTTON_MOUSE
options GEOM
device isa
device eisa
device pci
device fdc
device ata
device atadisk
device atapicd
device atkbdc
device atkbd
device psm
device vga
device splash
device sc
device npx
device pmtimer
device cbb
device pccard
device cardbus
device sio
device loop
device ether
device pty
device bpf
</config>
--
Carl Schmidt
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
