'Me too'
Dmesg from working kernel attached, not sure how to get a dmesg from the
broken one. :(
Send me a mail if any further info would help.
(I have built two kernels recently, both have had this problem)
On Tue, Oct 01, 2002 at 01:06:59PM +0100, Mark Murray wrote:
> Hi
>
> I'm running a kernel with your very latest nexus.c 1.49.
>
> The problem of the disappearing HD has not been fixed by this.
>
> Enclosed are verbose mesg's, one from a three-hour-ago
> (1st Oct 2002, 11:00 am, BST) kernel (broken), and another
> from a working Sept 22nd kernel.
>
> M
> --
> o Mark Murray
> \_
> O.\_ Warning: this .sig is umop ap!sdn
Content-Description: dmesg.BROKEN
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-CURRENT #1: Tue Oct 1 11:26:25 BST 2002
> [EMAIL PROTECTED]:/usr/src/sys/i386/compile/LIBRETTO
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc04ce000.
> Preloaded elf module "/boot/kernel/linux.ko" at 0xc04ce0b4.
> Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc04ce160.
> Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc04ce20c.
> Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc04ce2b8.
> Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc04ce364.
> Preloaded elf module "/boot/kernel/miibus.ko" at 0xc04ce410.
> Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc04ce4bc.
> Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc04ce568.
> Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04ce614.
> Preloaded elf module "/boot/kernel/random.ko" at 0xc04ce6c0.
> Preloaded elf module "/boot/kernel/atspeaker.ko" at 0xc04ce76c.
> Preloaded elf module "/boot/kernel/if_ep.ko" at 0xc04ce81c.
> Preloaded elf module "/boot/kernel/nfsserver.ko" at 0xc04ce8c8.
> Preloaded elf module "/boot/kernel/nfsclient.ko" at 0xc04ce978.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04cea28.
> Calibrating clock(s) ... TSC clock: 233270316 Hz, i8254 clock: 1193097 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz
> CLK_USE_TSC_CALIBRATION not specified - using old calibration method
> Timecounter "TSC" frequency 233289783 Hz
> CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU)
> Origin = "GenuineIntel" Id = 0x581 Stepping = 1
> Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> real memory = 67174400 (65600K bytes)
> Physical memory chunk(s):
> 0x00001000 - 0x0009efff, 647168 bytes (158 pages)
> 0x004f5000 - 0x04007fff, 61943808 bytes (15123 pages)
> avail memory = 60010496 (58604K bytes)
> bios32: Found BIOS32 Service Directory header at 0xc00f8e20
> bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0xc5f8
> pnpbios: Found PnP BIOS data at 0xc00f8e30
> pnpbios: Entry = f0000:90a8 Rev = 1.0
> pnpbios: Event flag at 510
> pnpbios: OEM ID c932f351
> Other BIOS signatures found:
> Intel Pentium detected, installing workaround for F00F bug
> null: <null device, zero device>
> random: <entropy source>
> mem: <memory & I/O>
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <TOSHIB 750 > on motherboard
> acpi0: power button is handled as a fixed feature programming model.
> ACPI timer looks GOOD min = 0, max = 2, width = 3
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> Timecounter "ACPI-fast" frequency 3579545 Hz
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x18a8-0x18ab on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_tz0: <thermal zone> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_acad0: <AC adapter> on acpi0
> acpi_cmbat0: <Control method Battery> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: physical bus=0
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> atspeaker0 port 0x61 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
> psm0: unable to allocate IRQ
> psmcpnp0 irq 12 on acpi0
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3-00, 3 buttons
> psm0: config:00000000, flags:00000000, packet size:4
> psm0: syncmask:08, syncbits:08
> sio0: irq maps: 0x1 0x11 0x11 0x11
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> unknown: not probed (disabled)
> ppc0: parallel port not found.
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> ppc0: parallel port not found.
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> BIOS Geometries:
> 0:03f8fe3f 0..1016=1017 cylinders, 0..254=255 heads, 1..63=63 sectors
> 0 accounted for
> Device configuration finished.
> Timecounters tick every 10.000 msec
> Initializing GEOMetry subsystem
> g_add_class(GPT)
> g_add_class(BSD)
> g_add_class(MBR)
> g_add_class(MBREXT)
> g_add_class(PC98)
> g_add_class(SUN)
> g_add_class(AES)
> g_add_class(DEV)
> bpf: lo0 attached
> Linux ELF exec handler installed
> acpi_cpu0: set speed to 100.0%
> acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
> acpi_acad0: On Line
> Mounting root from ufs:/dev/ad0s2a
> g_dev_clone(ad0s2a)
> setrootbyname failed
> ffs_mountroot: can't find rootvp
> Root mount failed: 6
>
> Manual root filesystem specification:
> <fstype>:<device> Mount <device> using filesystem <fstype>
> eg. ufs:da0s1a
> ? List valid disk boot devices
> <empty line> Abort manual input
>
> mountroot>
Content-Description: dmesg.GOOD
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-CURRENT #25: Sun Sep 22 10:55:27 BST 2002
> [EMAIL PROTECTED]:/usr/src/sys/i386/compile/LIBRETTO
> Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc04fb000.
> Preloaded elf module "/boot/kernel.old/linux.ko" at 0xc04fb0b8.
> Preloaded elf module "/boot/kernel.old/sysvshm.ko" at 0xc04fb168.
> Preloaded elf module "/boot/kernel.old/sysvsem.ko" at 0xc04fb218.
> Preloaded elf module "/boot/kernel.old/sysvmsg.ko" at 0xc04fb2c8.
> Preloaded elf module "/boot/kernel.old/if_dc.ko" at 0xc04fb378.
> Preloaded elf module "/boot/kernel.old/miibus.ko" at 0xc04fb428.
> Preloaded elf module "/boot/kernel.old/if_wi.ko" at 0xc04fb4d8.
> Preloaded elf module "/boot/kernel.old/snd_mss.ko" at 0xc04fb588.
> Preloaded elf module "/boot/kernel.old/snd_pcm.ko" at 0xc04fb638.
> Preloaded elf module "/boot/kernel.old/random.ko" at 0xc04fb6e8.
> Preloaded elf module "/boot/kernel.old/atspeaker.ko" at 0xc04fb798.
> Preloaded elf module "/boot/kernel.old/if_ep.ko" at 0xc04fb84c.
> Preloaded elf module "/boot/kernel.old/nfsserver.ko" at 0xc04fb8fc.
> Preloaded elf module "/boot/kernel.old/nfsclient.ko" at 0xc04fb9b0.
> Preloaded elf module "/boot/kernel.old/acpi.ko" at 0xc04fba64.
> Calibrating clock(s) ... TSC clock: 233269880 Hz, i8254 clock: 1193093 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz
> CLK_USE_TSC_CALIBRATION not specified - using old calibration method
> Timecounter "TSC" frequency 233289311 Hz
> CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU)
> Origin = "GenuineIntel" Id = 0x581 Stepping = 1
> Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> real memory = 67174400 (65600K bytes)
> Physical memory chunk(s):
> 0x00001000 - 0x0009efff, 647168 bytes (158 pages)
> 0x00522000 - 0x04007fff, 61759488 bytes (15078 pages)
> avail memory = 59830272 (58428K bytes)
> bios32: Found BIOS32 Service Directory header at 0xc00f8e20
> bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0xc5f8
> pnpbios: Found PnP BIOS data at 0xc00f8e30
> pnpbios: Entry = f0000:90a8 Rev = 1.0
> pnpbios: Event flag at 510
> pnpbios: OEM ID c932f351
> Other BIOS signatures found:
> Intel Pentium detected, installing workaround for F00F bug
> null: <null device, zero device>
> random: <entropy source>
> mem: <memory & I/O>
> pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a050
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179)
> Using $PIR table, 5 entries at 0xc00f8e80
> PCI-Only Interrupts: none
> Location Bus Device Pin Link IRQs
> embedded 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 19 A 0x01 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 19 B 0x01 3 4 5 6 7 9 10 11 12 14 15
> slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15
> slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15
> slot 1 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <TOSHIB 750 > on motherboard
> acpi0: power button is handled as a fixed feature programming model.
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 2, width = 3
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> ACPI timer looks GOOD min = 0, max = 1, width = 2
> Timecounter "ACPI-fast" frequency 3579545 Hz
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x18a8-0x18ab on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_tz0: <thermal zone> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_acad0: <AC adapter> on acpi0
> acpi_cmbat0: <Control method Battery> on acpi0
> pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib1
> pci0: physical bus=0
> found-> vendor=0x1179, dev=0x0601, revid=0x2e
> bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> map[10]: type 3, range 32, base fd000000, size 24, enabled
> map[14]: type 1, range 32, base ffc00000, size 21, enabled
> map[18]: type 1, range 32, base ffb00000, size 20, enabled
> found-> vendor=0x10c8, dev=0x0004, revid=0x01
> bus=0, slot=4, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> intpin=a, irq=255
> map[10]: type 4, range 32, base 00000000, size 5, port disabled
> found-> vendor=0x1179, dev=0x0701, revid=0x22
> bus=0, slot=17, func=0
> class=07-80-00, hdrtype=0x00, mfdev=0
> intpin=a, irq=255
> found-> vendor=0x1179, dev=0x060f, revid=0x20
> bus=0, slot=19, func=0
> class=06-07-00, hdrtype=0x02, mfdev=1
> intpin=a, irq=255
> found-> vendor=0x1179, dev=0x060f, revid=0x20
> bus=0, slot=19, func=1
> class=06-07-00, hdrtype=0x02, mfdev=1
> intpin=b, irq=255
> pci0: <display, VGA> at device 4.0 (no driver attached)
> pci0: <simple comms> at device 17.0 (no driver attached)
> cbb0: <ToPIC97 PCI-CardBus Bridge> at device 19.0 on pci0
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> pcib1: matched entry for 0.19.INTA (source \\_SB_.PCI0.EIO_.LNKA)
> pcib1: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
> pcib1: slot 19 INTA routed to irq 3 via \\_SB_.PCI0.EIO_.LNKA
> cbb1: <ToPIC97 PCI-CardBus Bridge> at device 19.1 on pci0
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> pcib1: matched entry for 0.19.INTB (source \\_SB_.PCI0.EIO_.LNKB)
> pcib1: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
> pcib1: slot 19 INTB routed to irq 3 via \\_SB_.PCI0.EIO_.LNKB
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> atspeaker0 port 0x61 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
> psm0: unable to allocate IRQ
> psmcpnp0 irq 12 on acpi0
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3-00, 3 buttons
> psm0: config:00000000, flags:00000000, packet size:4
> psm0: syncmask:08, syncbits:08
> sio0: irq maps: 0x1 0x11 0x11 0x11
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> unknown: not probed (disabled)
> ppc0: parallel port not found.
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> ppc0: parallel port not found.
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> isa0: <ISA bus> on motherboard
> atkbdc: atkbdc0 already exists; skipping it
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> Trying Read_Port at 203
> Trying Read_Port at 243
> Trying Read_Port at 283
> Trying Read_Port at 2c3
> Trying Read_Port at 303
> Trying Read_Port at 343
> Trying Read_Port at 383
> Trying Read_Port at 3c3
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
> sc0: <System console> on isa0
> sc0: VGA <16 virtual consoles, flags=0x200>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> fb0: vga0, vga, type:VGA (5), flags:0x7007f
> fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
> fb0: init mode:24, bios mode:3, current mode:24
> fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
> VGA parameters upon power-up
> 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> VGA parameters in BIOS for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> EGA/VGA parameters to be used for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
> ata0: mask=03 ostat0=50 ostat2=00
> ata0-slave: ATAPI d0 00
> ata0-master: ATAPI 00 00
> ata0: mask=03 stat0=50 stat1=50
> ata0-master: ATA 01 a5
> ata0: devices=01
> ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
> fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
> pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
> mss_probe: no address given, try 0x530
> mss_detect, busy still set (0xff)
> pcm0 failed to probe at port 0xf8c-0xf94,0xe0e,0x530-0x537 irq 5 drq 1 on isa0
> pmtimer0 on isa0
> ppc0: parallel port not found.
> ppc0: <Parallel port> failed to probe at irq 7 on isa0
> sbc0 failed to probe at port 0x220 irq 5 drq 1 flags 0x10 on isa0
> isa_probe_children: probing PnP devices
> BIOS Geometries:
> 0:03f8fe3f 0..1016=1017 cylinders, 0..254=255 heads, 1..63=63 sectors
> 0 accounted for
> Device configuration finished.
> Timecounters tick every 10.000 msec
> bpf: lo0 attached
> Linux ELF exec handler installed
> IPsec: Initialized Security Association Processing.
> acpi_cpu0: set speed to 100.0%
> acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
> acpi_acad0: On Line
> pccard0: CIS version PCCARD 2.0 or 2.1
> pccard0: CIS info: 3Com, Megahertz 589E, TP/BNC LAN PC Card, 005
> pccard0: Manufacturer code 0x101, product 0x589
> pccard0: function 0: network adapter, ccr addr 10000 mask 3
> pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4,
>iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
> pccard0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4,
>iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
> ep0: <3Com 3c589 10Mbps Ethernet> at port 0x100-0x10f irq 3 function 0 config 1 on
>pccard0
> ep0: Ethernet address 00:10:5a:2d:39:c6
> bpf: ep0 attached
> stray irq 7
> stray irq 7
> found-> vendor=0x1011, dev=0x0019, revid=0x41
> class=02-00-00, hdrtype=0x00, mfdev=0
> intpin=a, irq=255
> cardbus1: Expecting link target, got 0x0
> cardbus1: Resource not specified in CIS: id=10, size=80
> cardbus1: Resource not specified in CIS: id=14, size=400
> dc0: <Intel 21143 10/100BaseTX> port 0x1000-0x107f mem 0x88002400-0x880027ff irq 3
>at device 0.0 on cardbus1
> dc0: Ethernet address: 00:80:00:80:00:80
> miibus0: <MII bus> on dc0
> dcphy0: <Intel 21143 NWAY media interface> on miibus0
> dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> bpf: dc0 attached
> Creating DISK ad0
> ar: FreeBSD check1 failed
> ad0: <TOSHIBA MK2016GAP/U0.30 A> ATA-5 disk at ata0-master
> ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
> ad0: 16 secs/int, 1 depth queue, BIOSPIO
> ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
> Mounting root from ufs:/dev/ad0s2a
> ad0s1: type 0x6, start 63, end = 4176899, size 4176837 : OK
> ad0s2: type 0xa5, start 4176900, end = 16338104, size 12161205 : OK
> ad0s3: type 0xb, start 16338105, end = 16530884, size 192780 : OK
> ad0s4: type 0xa5, start 16530885, end = 39070079, size 22539195 : OK
> start_init: trying /sbin/init
> splash: image decoder found: star_saver
--
Michael McGoldrick: [EMAIL PROTECTED]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #17: Sat Sep 21 22:58:50 BST 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/URIEL
Preloaded elf kernel "/boot/kernel.good/kernel" at 0xc0525000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc05250b0.
Preloaded elf module "/boot/kernel.good/acpi.ko" at 0xc0525100.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 546619009 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (546.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 124448768 (121532K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00f7900
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Acer M1615 > on motherboard
ACPI-0466: *** Error: GPE0 block overlaps the GPE1 block
acpi0: could not enable ACPI: AE_BAD_VALUE
device_probe_and_attach: acpi0 attach returned 6
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Ali Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x90800000-0x90800fff irq 11 at
device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem
0x90500000-0x905fffff,0x90400000-0x90400fff irq 5 at device 11.0 on pci0
csa: card is Unknown/invalid SSID (CS4614)
pcm0: <CS461x PCM Audio> on csa0
atapci0: <AcerLabs Aladdin ATA33 controller> port 0x8400-0x840f at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem 0x82100000-0x821000ff irq 10
at device 19.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:60:67:76:6e:bf
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: 9768MB <ST310212A> [19846/16/63] at ata0-master UDMA33
ad2: DMA limited to UDMA33, non-ATA66 cable or device
ad2: 39266MB <IBM-DTLA-305040> [79780/16/63] at ata1-master UDMA33
acd0: DVD-ROM <LG DVD-ROM DRD-8120B> at ata0-slave PIO4
Mounting root from ufs:/dev/ad2s2a
WARNING: / was not properly dismounted
ad0c: rejecting partition in BSD label: it isn't entirely within the slice
ad0c: start 8321670, end 9333764, size 1012095
ad0ca: start 63, end 8321669, size 8321607
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 0 files 3
/usr: superblock summary recomputed
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny,
logging disabled
logo_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (logo_saver, 0xc24aacf0, 0) error 19
