On Sep 30 at 11:59, John Baldwin spoke:
>
> These messages above that you left out are very important. :(
> Also, if you can get a trace by typing 't' at the db> prompt
> that can be very helpful as well.
Ok. I hope there aren't to many mistakes.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
Tiemcounters tick every 10.000 msec
ad0: 76351MB <SAMSUNG SP8004H> [155127/16/63] at ata0-master UDMA100
acd0: CD-RW <Memorex SixteenMAXX 1040> at ata1-master PIO4
acd1: CD-RW <PLEXTOR CD-R PX-W4012A> at ata2-master PIO4
acd2: CD-RW <PLEXTOR CD-R PX-W4012A> at ata3-master PIO4
acd3: CD-RW <PLEXTOR CD-R PX-W4012A> at ata4-master PIO4
acd4: CD-RW <PLEXTOR CD-R PX-W4012A> at ata5-master PIO4
Mounting root from ufs:/dev/ad0s3a
Fatal trap 12: page fault while in kernal mode
fault virtual address = 0xdeadc0de
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc044d03e
stack pointer = 0x10:0xcd214a94
frame pointer = 0x10:0xcd214c9a
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 1 (init)
kernel: type 12 trap, code=0
Stopped at generic_bcopy+0x1a: repe movsl (%esi),%es:(%edi)
db> Context switches not allowd in the debugger.
db>
db> trace
generic_bcopy(c0f079c0,cd214cf0,0,0,cd214cd8) at generic_bcopy+0x1a
start_init(0,cd214d48,c04b26b1,348,0) at start_init+0x45e
fork_exit(c02b28b0,0,cd214d48) at fork_exit+0xa5
fork_trampoline() at fork_trampoline+0x1a
--- trap 0, eip = 0, esp = 0xcd214d7c, ebp = 0x2f ---
db>
I have also attached a dmesg. I tought it would be one from Release.
But it seems to be a concatenation of Current and Release...
-Hanspeter
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #: Sat Sep 28 18:14:51 CEST 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc065f000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1160341146 Hz
CPU: AMD Athlon(TM) XP 1800+ (1160.34-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xffffffffc0400000<AMIE,DSP,3DNow!>
real memory = 268419072 (262128K bytes)
avail memory = 253677568 (247732K bytes)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 9 entries at 0xc00f1e30
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xef000000-0xef000fff irq 9 at device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xee800000-0xee800fff irq 9 at device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA100 controller> port 0xb800-0xb80f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <Promise TX2 ATA100 controller> port
0x8800-0x880f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 mem
0xee000000-0xee003fff irq 10 at device 9.0 on pci0
ata2: at 0xa000 on atapci1
ata3: at 0x9400 on atapci1
pci0: <multimedia, audio> at device 10.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem 0xed800000-0xed8000ff irq 9 at
device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
/usr/src/sys/vm/uma_core.c:1307: could sleep with "rl0" locked from
/usr/src/sys/pci/if_rl.c:872
rl0: Ethernet address: 00:02:44:67:ad:1b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
/usr/src/sys/vm/uma_core.c:1307: could sleep with "rl0" locked from
/usr/src/sys/pci/if_rl.c:597
atapci2: <Promise TX2 ATA133 controller> port
0x6400-0x640f,0x6800-0x6803,0x7000-0x7007,0x7400-0x7403,0x7800-0x7807 mem
0xed000000-0xed003fff irq 9 at device 12.0 on pci0
ata4: at 0x7800 on atapci2
ata5: at 0x7000 on atapci2
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
Timecounters tick every 10.000 msec
ad0: 76351MB <SAMSUNG SP8004H> [155127/16/63] at ata0-master UDMA100
acd0: CD-RW <Memorex SixteenMAXX 1040> at ata1-master PIO4
acd1: CD-RW <PLEXTOR CD-R PX-W4012A> at ata2-master PIO4
acd2: CD-RW <PLEXTOR CD-R PX-W4012A> at ata3-master PIO4
acd3: CD-RW <PLEXTOR CD-R PX-W4012A> at ata4-master PIO4
acd4: CD-RW <PLEXTOR CD-R PX-W4012A> at ata5-master PIO4
Mounting root from ufs:/dev/ad0s3a
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xdeadc0de
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc044d03e
stack pointer = 0x10:0xcd214a94
frame pointer = 0x10:0xcd214c94
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 1 (init)
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6.2-RELEASE #4: Sat Sep 21 22:08:35 CEST 2002
[EMAIL PROTECTED]:/usr/src/sys2/compile/A1
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(TM) XP 1800+ (1160.34-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 268419072 (262128K bytes)
sio0: gdb debugging port
avail memory = 257232896 (251204K bytes)
Preloaded elf kernel "kernel" at 0xc03ee000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f1e30
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <ATI model 5446 graphics accelerator> at 0.0 irq 11
isab0: <PCI to ISA bridge (vendor=1039 device=0018)> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xef000000-0xef000fff irq 9 at device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xee800000-0xee800fff irq 9 at device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA100 controller> port 0xb800-0xb80f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <Promise TX2 ATA100 controller> port
0x8800-0x880f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 mem
0xee000000-0xee003fff irq 10 at device 9.0 on pci0
ata2: at 0xa000 on atapci1
ata3: at 0x9400 on atapci1
pcm0: <AudioPCI ES1373-B> port 0x8400-0x843f irq 5 at device 10.0 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem 0xed800000-0xed8000ff irq 9 at
device 11.0 on pci0
rl0: Ethernet address: 00:02:44:67:ad:1b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci2: <Promise TX2 ATA133 controller> port
0x6400-0x640f,0x6800-0x6803,0x7000-0x7007,0x7400-0x7403,0x7800-0x7807 mem
0xed000000-0xed003fff irq 9 at device 12.0 on pci0
ata4: at 0x7800 on atapci2
ata5: at 0x7000 on atapci2
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4b: ISDN call control device attached
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
IP Filter: v3.4.27 initialized. Default = block all, Logging = enabled
ad0: 76351MB <SAMSUNG SP8004H> [155127/16/63] at ata0-master UDMA100
acd0: CD-RW <Memorex SixteenMAXX 1040> at ata1-master PIO4
acd1: CD-RW <PLEXTOR CD-R PX-W4012A> at ata2-master PIO4
acd2: CD-RW <PLEXTOR CD-R PX-W4012A> at ata3-master PIO4
acd3: CD-RW <PLEXTOR CD-R PX-W4012A> at ata4-master PIO4
acd4: CD-RW <PLEXTOR CD-R PX-W4012A> at ata5-master PIO4
cd1 at ata2 bus 0 target 0 lun 0
cd1: <PLEXTOR CD-R PX-W4012A 1.02> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: cd present [215249 x 2048 byte records]
cd2 at ata3 bus 0 target 0 lun 0
cd2: <PLEXTOR CD-R PX-W4012A 1.02> Removable CD-ROM SCSI-0 device
cd2: 16.000MB/s transfers
cd2: cd present [215249 x 2048 byte records]
cd3 at ata4 bus 0 target 0 lun 0
cd3: <PLEXTOR CD-R PX-W4012A 1.02> Removable CD-ROM SCSI-0 device
cd3: 16.000MB/s transfers
cd3: cd present [215249 x 2048 byte records]
cd4 at ata5 bus 0 target 0 lun 0
cd4: <PLEXTOR CD-R PX-W4012A 1.02> Removable CD-ROM SCSI-0 device
cd4: 16.000MB/s transfers
cd4: cd present [215249 x 2048 byte records]
cd0 at ata1 bus 0 target 0 lun 0
cd0: <Memorex SixteenMAXX 1040 TWS1> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [330066 x 2048 byte records]
Mounting root from ufs:/dev/ad0s4a
