Julian Elischer wrote: > > make sure you have all the debugging turned off. > there is a LOT of debugging.. > at the moment.
well, this was my first attempt. it did not work. even if i disable INVARIANTS, WITNESS and USB_DEBUG completely it is still slow as hell :( PC-CARD driver works just fine and get 50-60 KBytes/sec even with all debug stuff enabled. so there should be another explanation. > On Tue, 27 Aug 2002, Maksim Yevmenkin wrote: > > > Hackers, > > > > I'm currently testing my Bluetooth code for FreeBSD on recent > > -current. After i upgraded to recent current from current-DP1 > > i'm experiencing a major slowdown in USB device speed. > > > > On current-DP1 the USB device was able to handle about 50-60 > > KBytes/sec. On recent -current _the_same_ device driver can > > only do 11-12 KBytes/sec :( > > > > Another driver (PC-CARD) connected to my Bluetooth stack > > can do 50-60 KBytes/sec (sending/receiving) - so it is > > not a Bluetooth stack itself. Also the same USB device > > connected to Linux box can do 50-60 KBytes/sec - so it is not > > a USB device itself. > > > > The problem only exists when i connect USB device to -current > > FreeBSD box. I suspect that problem could be in: > > > > a) USB device driver > > b) USB stack itself > > c) someplace else? > > > > Does anyone have a similar problems? I'm slowly going though > > the diff's between DP1 USB code and -current USB code, but > > may be someone can give me a clue. thanks, max To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
