I still haven't got my Netgear MA401 working on my Compaq Evo N160 laptop using FreeBSD-5.0 but it works using FreeBSD-4.6.
Now I wonder isn't it wrong that both pcic0 and fxp0 using the same memory area 0xd0200000? In 4.6 the pcic0 get 0x44000000 (4.6-RELEASE) resp. 0x88000000 (4.6-STABLE). Any ideas? I've tested patches, hints and kerneloptions found in other threads but nothing makes any difference. dmesg for 5.0-DP1 and 5.0-CURRENT (cvsuped several times from 27 june until today): pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 10 at device 6.0 on pci2 pcib2: device pcic0 requested decoded memory range 0xd0200000-0xd02fffff pccard0: <PC Card bus (classic)> on pcic0 pcic0: PCI Memory allocated: 0xd0200000 pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq] fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xd0200000-0xd0200fff irq 9 at device 8.0 on pci2 dmesg for 4.6-RELEASE: pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 10 at device 6.0 on pci2 pcic0: PCI Memory allocated: 0x44000000 pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq] pccard0: <PC Card bus (classic)> on pcic0 fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xd0200000-0xd0200fff irq 9 at device 8.0 on pci2 dmesg for 4.6-CURRENT (cvsuped today): pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 10 at device 6.0 on pci2 pcic0: PCI Memory allocated: 0x88000000 pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq] pccard0: <PC Card bus (classic)> on pcic0 fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xd0200000-0xd0200fff irq 9 at device 8.0 on pci2 -- Mauritz Sundell, [EMAIL PROTECTED] ----- Original Message ----- From: "Mauritz Sundell" <[EMAIL PROTECTED]> To: "M. Warner Losh" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Wednesday, July 10, 2002 11:02 AM Subject: Re: Netgear MA401 pccard support? > ----- Original Message ----- > From: "M. Warner Losh" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Cc: <[EMAIL PROTECTED]> > Sent: Wednesday, July 10, 2002 7:05 AM > Subject: Re: Netgear MA401 pccard support? > > > > In message: <046701c2279c$2878c4e0$0e81a8c0@gilgamesh> > > "Mauritz Sundell" <[EMAIL PROTECTED]> writes: > > : I cant get my NETGEAR MA401 network pccard to work in CURRENT. > > > > Bummer. It works for other people. > > > > : I have a Compaq Evo N160 laptop. > > > > What kind of pccard/cardbus bridge do you have? > TI1410 PCI-CardBus Bridge > > > > : Today I saw that the man-page for pcic(4) was updated (v.1.5) and stated > > : "This does not work at all at the moment." > > > > That's just for older ISA devices. Most PCI devices work great. > > > > : It did work under 4.6-RELEASE ( I have not tried 4.6-STABLE). > > > > Maybe sending a dmesg from -stable would help. Alternatively, you > > should be able to run OLDCARD on -current. > > > > Warner > To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
