--- Miguel Mendez <[EMAIL PROTECTED]> wrote:
>
> Hi there,
>
> > I'm having problem with the TI cardbus bridge to
> > recognize PCCARD in "NEWCARD" kernel. I have a
> desktop
> > with TI PCI1250 adaptor and an IBM Thinkpad with
> TI
> > 1450. Both recognize PC Cards in "GENERIC" kernel,
> but
> > get "Card has no functions" in NEWCARD. I checked
> the
> > maillist and found no answer. The same kernel ran
> fine
> > in a Toshiba Portege with ToPIC100 cardbus bridge.
> Is
> > this something unique to TI chips? Any suggestion
> I
> > should try?
>
> My Thinkpad 310 is running -CURRENT as of the 29th
> of March. I normally
> use a CARDBUS nic, but I've just inserted a PCCARD
> nic on the second
> slot and it's recognized as ed0. My hardware has a
> TI1131 PCI-CardBus
> Bridge.
>
> It seems to work here, when did you last cvsup your
> src?
>
> Cheers,
Hi Miguel,
I have an IBM Thinkpad 600X with latest BIOS from
their web site. CURRENT was updated 31 Mar.
I also had no problem with CARDBUS (a realtek 3190B).
I tried 3com CCFEM556B (a combo card), Xircom
CreditCard Ethernet 10/100, Orinoco Silver, all showed
same error no matter the cards were inserted before
power on or after boot up.
Attached is the dmesg from my desktop (ASUS CUSL2 with
PIII 750MHz) if this may help.
Cheers,
__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://http://taxes.yahoo.com/
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #20020317: Sun Mar 17 23:51:21 HKT 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/SHIZUKA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc048b000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 757461721 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (757.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268349440 (262060K bytes)
avail memory = 256212992 (250208K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 10 entries at 0xc00f1360
acpi0: <ASUS CUSL2 > on motherboard
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pccbb0: <TI1225 PCI-CardBus Bridge> irq 9 at device 10.0 on pci2
pccbb0: PCI Memory allocated: ed000000
cardbus0: <CardBus bus> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <TI1225 PCI-CardBus Bridge> irq 9 at device 10.1 on pci2
pccbb1: PCI Memory allocated: ed001000
cardbus1: <CardBus bus> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
pci2: <serial bus, FireWire> at device 12.0 (no driver attached)
pcm0: <Creative EMU10K1> port 0xd800-0xd81f irq 5 at device 14.0 on pci2
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at
device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: OmniVision OV511+ Camera, rev 1.00/1.00, addr 2
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device
31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at
device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5
irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
pccbb0: card inserted: event=0x00000000, state=30000410
pccard0: chip_socket_enable
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccard0: read_cis
pccard0: check_cis_quirks
pccard0: Card has no functions!
pccbb0: PC Card card activation failed
pccbb1: card inserted: event=0x00000000, state=30001810
pccard1: chip_socket_enable
pccbb_pcic_socket_enable:
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb1: pccbb_power: CARD_VCC_XV and CARD_VPP_VCC [12]
pccbb1: ready never happened, status = 0c
pccard1: read_cis
pccard1: check_cis_quirks
pccard1: Card has no functions!
pccbb1: PC Card card activation failed
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100
ad1: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-slave UDMA100
acd0: CD-RW <SONY CD-RW CRX120E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
pccbb_pcic_socket_disable
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: card inserted: event=0x00000000, state=30000410
pccard0: chip_socket_enable
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccard0: read_cis
cis mem map cee96000
pccard0: CIS tuple chain:
CISTPL_NONE
00
unhandled CISTPL 3
03 00
CISTPL_NONE
00
CISTPL_END
ff
cis mem map cee96000
CISTPL_LINKTARGET expected, code 00 observed
pccard0: check_cis_quirks
pccard0: Card has no functions!
pccbb0: PC Card card activation failed
