Hi,
I finally got around to hook up a serial console and capture the error
message. This is with ACPI_DEBUG enabled in the kernel config, but
ACPI is still loaded as a module, not configured statically.
acpi0: <PTLTD EBRSDT > on motherboard
ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST
What surprises me is that the debug.acpi.* settings don't seem to take
effect. Would I need to configure ACPI statically for them to work,
or is this problem just too early in the boot sequence?
And what can I try next?
--
Regards,
Georg.
----snip----serial console captured during boot----snip----
OK show
LINES=24
acpi_load=YES
bootfile=kernel
console=comconsole
currdev=disk1s2a:
debug.acpi.disable=all
debug.acpi.layer=ACPI_HARDWARE
hint.acpi.0.oem=PTLTD
hint.acpi.0.revision=1
hint.acpi.0.rsdt=0x3ff6830a
hint.adv.0.at=isa
hint.aha.0.at=isa
hint.aic.0.at=isa
hint.apm.0.at=nexus
hint.ata.0.at=isa
hint.ata.0.irq=14
hint.ata.0.port=0x1F0
hint.ata.1.at=isa
hint.ata.1.irq=15
hint.ata.1.port=0x170
hint.atkbd.0.at=atkbdc
hint.atkbd.0.flags=0x1
hint.atkbd.0.irq=1
hint.atkbdc.0.at=isa
hint.atkbdc.0.port=0x060
hint.bt.0.at=isa
hint.cs.0.at=isa
hint.cs.0.port=0x300
hint.ed.0.at=isa
hint.ed.0.irq=10
hint.ed.0.maddr=0xd8000
hint.ed.0.port=0x280
hint.fd.0.at=fdc0
hint.fd.0.drive=0
hint.fd.1.at=fdc0
hint.fd.1.drive=1
hint.fdc.0.at=isa
hint.fdc.0.drq=2
hint.fdc.0.irq=6
hint.fdc.0.port=0x3F0
hint.fe.0.at=isa
hint.fe.0.port=0x300
hint.ie.0.at=isa
hint.ie.0.irq=10
hint.ie.0.maddr=0xd0000
hint.ie.0.port=0x300
hint.le.0.at=isa
hint.le.0.irq=5
hint.le.0.maddr=0xd0000
hint.le.0.port=0x300
hint.lnc.0.at=isa
hint.lnc.0.drq=0
hint.lnc.0.irq=10
hint.lnc.0.port=0x280
hint.npx.0.at=nexus
hint.npx.0.irq=13
hint.npx.0.port=0x0F0
hint.pcic.0.at=isa
hint.pcic.0.irq=10
hint.pcic.0.maddr=0xd0000
hint.pcic.0.port=0x3e0
hint.pcic.1.at=isa
hint.pcic.1.disabled=1
hint.pcic.1.irq=11
hint.pcic.1.maddr=0xd4000
hint.pcic.1.port=0x3e2
hint.pmtimer.0.at=isa
hint.ppc.0.at=isa
hint.ppc.0.irq=7
hint.psm.0.at=atkbdc
hint.psm.0.irq=12
hint.sc.0.at=isa
hint.sc.0.flags=0x100
hint.sio.0.at=isa
hint.sio.0.flags=0x10
hint.sio.0.irq=4
hint.sio.0.port=0x3F8
hint.sio.1.at=isa
hint.sio.1.irq=3
hint.sio.1.port=0x2F8
hint.sio.2.at=isa
hint.sio.2.disabled=1
hint.sio.2.irq=5
hint.sio.2.port=0x3E8
hint.sio.3.at=isa
hint.sio.3.disabled=1
hint.sio.3.irq=9
hint.sio.3.port=0x2E8
hint.sn.0.at=isa
hint.sn.0.irq=10
hint.sn.0.port=0x300
hint.vga.0.at=isa
hint.vt.0.at=isa
interpret=OK
kernel=kernel
kernel_options=
kernelname=/boot/kernel/kernel
loaddev=disk1s2a:
module_path=/boot/kernel;/boot/kernel;/boot/modules;/modules
prompt=${interpret}
OK boot
/boot/kernel/acpi.ko text=0x34d9c data=0x1090+0xbf8 syms=[0x4+0x4c80]
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #39: Sun Dec 16 22:25:29 CET 2001
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/HUNTER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0446000.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc04460a8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc044615c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0446208.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1129576481 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1129.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073086464 (1047936K bytes)
avail memory = 1040580608 (1016192K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 14 entries at 0xc00fdee0
apm: Other PM system enabled.
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD EBRSDT > on motherboard
ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
