Hello,
I have just compiled and installed -current from this morning
7AMPST, and have noticed that when acpi is enabled in loader.conf the OS
does not see the ps2 mouse port. When I turn off ACPI the mouse port
shows up fine. Other than not seeing the ps2 port when in ACPI enabled
mode, the OS works without a hitch on my motherboard. Any ideas? IF this
is a known problem please let me know, as I have been off this list for
a month or so.
On another note .. when doing a make distribution in
/usr/src/etc, the process will fail when trying to install MAKEDEV and
MAKEDEV.local into /dev both in single user and multiuser. I got around
this by telling it to not install them.
I have attached dmesg output from both ACPI and non ACPI enabled
boots.
Thanks in advance,
Jon Christopherson
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sat Dec 15 08:04:04 PST 2001
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENESIS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0438000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04380a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 598476354 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (598.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 133955584 (130816K bytes)
avail memory = 125849600 (122900K bytes)
pnpbios: Bad PnP BIOS data checksum
Pentium Pro MTRR support enabled
VESA: v3.0, 16320k memory, flags:0x1, mode table:0xc03788a2 (1000022)
VESA: NVidia
Using $PIR table, 11 entries at 0xc00f2f60
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIOEM OEMRSDT > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pcm0: <AudioPCI ES1373-B> port 0xdf00-0xdf3f irq 11 at device 7.0 on pci2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdf80-0xdf9f mem
0xfe900000-0xfe9fffff,0xf43ff000-0xf43fffff irq 10 at device 9.0 on pci2
fxp0: Ethernet address 00:a0:c9:69:49:b4
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff
irq 9 at device 10.0 on pci2
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
pci2: <multimedia, video> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 11 at device 31.2
on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 on
acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata-: ata0 already exists, skipping it
ata-: ata1 already exists, skipping it
atkbdc-: atkbdc0 already exists, skipping it
fdc-: fdc0 already exists, skipping it
ppc-: ppc0 already exists, skipping it
sio-: sio0 already exists, skipping it
sio-: sio1 already exists, skipping it
sc-: sc0 already exists, skipping it
vga-: vga0 already exists, skipping it
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ad0: 39082MB <Maxtor 54098U8> [79406/16/63] at ata0-master UDMA66
acd0: CDROM <CREATIVECD4831E> at ata1-master PIO4
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sat Dec 15 08:04:04 PST 2001
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENESIS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03f4000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 598476017 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (598.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 133955584 (130816K bytes)
avail memory = 126128128 (123172K bytes)
pnpbios: Bad PnP BIOS data checksum
Pentium Pro MTRR support enabled
VESA: v3.0, 16320k memory, flags:0x1, mode table:0xc03788a2 (1000022)
VESA: NVidia
Using $PIR table, 11 entries at 0xc00f2f60
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pcm0: <AudioPCI ES1373-B> port 0xdf00-0xdf3f irq 11 at device 7.0 on pci2
pcm0: ac97 codec invalid or not present (id == 0)
device_probe_and_attach: pcm0 attach returned 6
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdf80-0xdf9f mem
0xfe900000-0xfe9fffff,0xf43ff000-0xf43fffff irq 10 at device 9.0 on pci2
fxp0: Ethernet address 00:a0:c9:69:49:b4
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff
irq 9 at device 10.0 on pci2
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
pci2: <multimedia, video> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 11 at device 31.2
on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ata-: ata0 already exists, skipping it
ata-: ata1 already exists, skipping it
sc-: sc0 already exists, skipping it
vga-: vga0 already exists, skipping it
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ad0: 39082MB <Maxtor 54098U8> [79406/16/63] at ata0-master UDMA66
acd0: CDROM <CREATIVECD4831E> at ata1-master PIO4
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
