On 27-Sep-01 Maxim Sobolev wrote:
> Hi,
>
> I found that I am no longer able to boot -current kernel on my machine. The
> system panices right after initialising ed0 driver:
>
> [...]
> ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xe800-0xe81f irq 9 at device
> 9.0 on pci0
> panic: inthand_add: can't initialize ICU
>
> Attached please find verbose kernel bootup messages obtained from the last
> good kernel from about a week ago.
>
> Please fix.
Could you, say, add a printf to icu_set() to print out the passed in interrupt
number before it returns EINVAL? Also, adding a call to debugger
(Debugger("foo");) and getting a stack trace would be very helpful.
> -Maxim
--
John Baldwin <[EMAIL PROTECTED]> -- http://www.FreeBSD.org/~jhb/
PGP Key: http://www.baldwin.cx/~john/pgpkey.asc
"Power Users Use the Power to Serve!" - http://www.FreeBSD.org/
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #26: Wed Sep 19 10:04:40 EEST 2001
root@big_brother:/usr/src/sys/i386/compile/MBSD
Calibrating clock(s) ... TSC clock: 501070587 Hz, i8254 clock: 1193026 Hz
Timecounter "i8254" frequency 1193026 Hz
Timecounter "TSC" frequency 501070587 Hz
CPU: AMD-K6(tm) 3D processor (501.07-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Enable Limit: 384M bytes
Write Allocate 15-16M bytes: Enable
real memory = 402587648 (393152K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00352000 - 0x17fe7fff, 399073280 bytes (97430 pages)
avail memory = 388304896 (379204K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fafd0
bios32: Entry = 0xfb450 (c00fb450) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb480
pnpbios: Found PnP BIOS data at 0xc00fc0a0
pnpbios: Entry = f0000:c0c8 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc032b000.
Preloaded elf module "/boot/kernel.old/acpi.ko" at 0xc032b0b8.
null: <null device, zero device>
mem: <memory & I/O>
K6-family MTRR support enabled (2 registers)
random: <entropy source>
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=05971106)
Using $PIR table, 6 entries at 0xc00fddf0
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AWARD AWRDACPI> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
can't fetch resources for \\_SB_.PCI0.ISA_.FDC0 - AE_AML_BUFFER_LIMIT
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0x5080-0x50ff,0x5000-0x507f,0xcf8-0xcff on acpi0
pci0: physical bus=0
map[10]: type 3, range 32, base d8000000, size 26, enabled
found-> vendor=0x1106, dev=0x0597, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x1106, dev=0x0586, revid=0x41
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000e000, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000e400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x02
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=9
found-> vendor=0x1106, dev=0x3040, revid=0x10
bus=0, slot=7, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
map[10]: type 4, range 32, base 0000e800, size 5, enabled
found-> vendor=0x10ec, dev=0x8029, revid=0x00
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=9
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xdc000000-0xddffffff
pcib1: prefetched decode 0xde000000-0xdeffffff
pci1: physical bus=1
map[10]: type 3, range 32, base de000000, size 24, enabled
map[14]: type 4, range 32, base 0000d000, size 8, enabled
map[18]: type 1, range 32, base dd000000, size 12, enabled
found-> vendor=0x1002, dev=0x4742, revid=0x5c
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xe000-0xe00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xe000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xe008
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe 14 eb
ata1-slave: ATAPI probe 14 eb
ata1: mask=03 stat0=10 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xe800-0xe81f irq 9 at device 9.0 on
pci0
bpf: ed0 attached
ed0: address 00:40:05:5b:69:33, type NE2000 (16 bit)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
fdc0: cannot reserve I/O port range (1 ports)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 1100.1.1> PRINTER MLC,PCL,PJL
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd1: unable to allocate IRQ
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
fdc0: cannot reserve I/O port range (1 ports)
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbd1: unable to allocate IRQ
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
atkbdc-: atkbdc0 already exists, using atkbdc1 instead
vga-: vga0 already exists, using vga1 instead
sc-: sc0 already exists, using sc1 instead
sio-: sio0 already exists, using sio2 instead
sio-: sio1 already exists, using sio3 instead
ppc-: ppc0 already exists, using ppc1 instead
Trying Read_Port at 203
CTL0031: start dependent (0)
CTL0031: adding irq mask 0x20
CTL0031: adding dma mask 0x2
CTL0031: adding dma mask 0x20
CTL0031: adding io range 0x220-0x22f, size=0x10, align=0x1
CTL0031: adding io range 0x330-0x331, size=0x2, align=0x1
CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0031: start dependent (1)
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding dma mask 0xe0
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0031: start dependent (1)
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding dma mask 0xe0
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: start dependent (2)
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding dma mask 0xe0
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: start dependent (2)
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0031: start dependent (2)
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: start dependent (2)
CTL0031: adding irq mask 0xca0
CTL0031: adding dma mask 0xb
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: end dependent
CTL2011: start dependent (0)
CTL2011: adding irq mask 0x400
CTL2011: adding io range 0x168-0x16f, size=0x8, align=0x1
CTL2011: adding io range 0x36e-0x36f, size=0x2, align=0x1
CTL2011: start dependent (1)
CTL2011: adding irq mask 0x800
CTL2011: adding io range 0x1e8-0x1ef, size=0x8, align=0x1
CTL2011: adding io range 0x3ee-0x3ef, size=0x2, align=0x1
CTL2011: start dependent (1)
CTL2011: adding irq mask 0x9c00
CTL2011: adding io range 0x100-0x1ff, size=0x8, align=0x8
CTL2011: adding io range 0x300-0x3ff, size=0x2, align=0x2
CTL2011: start dependent (2)
CTL2011: adding irq mask 0x8000
CTL2011: adding io range 0x170-0x177, size=0x8, align=0x1
CTL2011: adding io range 0x376-0x376, size=0x1, align=0x1
CTL2011: end dependent
PNPffff: adding io range 0x100-0x3f8, size=0x1, align=0x8
CTL7001: adding io range 0x200-0x207, size=0x8, align=0x1
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
atkbdc1: <Keyboard controller (i8042)> failed to probe at port 0x60 on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
sc1: no video adapter found.
sc1: <System console> failed to probe at flags 0x6 on isa0
sio2 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio3 failed to probe at port 0x2f8 irq 3 on isa0
ppc1: parallel port found at 0x378
ppc1: cannot reserve I/O port range
ppc1: <Parallel port> failed to probe at port 0x378-0x37f irq 7 flags 0x8 on isa0
isa_probe_children: probing PnP devices
unknown: <Audio> failed to probe at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq
1,5 on isa0
ata2: iobase=0x0168 altiobase=0x036e bmaddr=0x0000
ata2: <Generic ESDI/IDE/ATA controller> at port 0x168-0x16f,0x36e-0x36f irq 10 on isa0
unknown: <Reserved> failed to probe at port 0x100 on isa0
unknown: <Game> failed to probe at port 0x200-0x207 on isa0
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ata1-slave: identify retries exceeded
ad0: success setting UDMA2 on VIA chip
Creating DISK ad0
ad0: <IC35L040AVER07-0/ER4OA44A> ATA-5 disk at ata0-master
ad0: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 32 depth queue, tagged UDMA33
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=3 dmamode=1 udmamode=-1 dmaflag=1
ata1-master: success setting PIO3 on generic chip
acd0: <Philips R O D 1270/B1.0> CDROM drive at ata1 as master
acd0: read 1722KB/s (57005KB/s), 256KB buffer, PIO3
acd0: Reads: CD-DA
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 9944234, size 9944172 : OK
ad0s2: type 0xb, start 9944235, end = 10763549, size 819315 : OK
ad0s3: type 0xc, start 10763613, end = 80405324, size 69641712 : OK
start_init: trying /sbin/init
