If either of my builtin serial ports is disabled in the bios then i get:
sio1: configured irq 0 not in bitmap of probed irqs0
sio1 port 0-0x7 irq 0 on acpi0
sio1 type 8250
and the boot process stops at this message.
since the acpi module is now loaded automatically, i can only boot if
none of the serial ports are disabled in the bios.
Please contact me with what further details are needed, dmesg with
serial ports enable in bios attached.
Thanks
Kelvin.
[EMAIL PROTECTED]
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #22: Thu Sep 13 23:27:53 EDT 2001
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/TRISTAL
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1007289998 Hz
CPU: AMD Athlon(tm) Processor (1007.29-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 402571264 (393136K bytes)
avail memory = 388112384 (379016K bytes)
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0363000.
Preloaded elf module "/boot/kernel/if_ppp.ko" at 0xc03630a8.
Preloaded elf module "/boot/kernel/if_tun.ko" at 0xc0363154.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0363200.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc03632ac.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc036335c.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc0363404.
Preloaded elf module "/boot/kernel/if_de.ko" at 0xc03634ac.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0363558.
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00f1720
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V-133 > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe0000000-0xe7ffffff at
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 5 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.21, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 5 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 4.4 (no driver attached)
pcm0: <Creative EMU10K1> port 0x9400-0x941f irq 5 at device 9.0 on pci0
sio0: <3COM PCI FaxModem> port 0x8800-0x8807 irq 12 at device 10.0 on pci0
sio0: type 16550A
de0: <Digital 21140A Fast Ethernet> port 0x8400-0x847f mem 0xd6800000-0xd680007f irq 5
at device 13.0 on pci0
de0: DEC DE500-AA 21140A [10-100Mb/s] pass 2.0
de0: address 00:00:f8:1e:30:20
atapci1: <Promise ATA100 controller> port
0x6800-0x683f,0x7000-0x7003,0x7400-0x7407,0x7800-0x7803,0x8000-0x8007 mem
0xd6000000-0xd601ffff irq 10 at device 17.0 on pci0
ata2: at 0x8000 on atapci1
ata3: at 0x7400 on atapci1
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc1: cannot reserve I/O port range
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio2 port 0x3f8-0x3ff irq 4 on acpi0
sio2: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
ppc1: cannot reserve I/O port range
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xd3fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc1: cannot reserve I/O port range
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad3: 14659MB <FUJITSU MPF3153AT> [29785/16/63] at ata1-slave UDMA66
ar0: 58623MB <ATA RAID0 array> [7473/255/63] subdisks:
ad6: 29311MB <Maxtor 53073H4> [59554/16/63] at ata3-master UDMA100
ad4: 29311MB <Maxtor 5T030H3> [59554/16/63] at ata2-master UDMA100
acd0: DVD-ROM <SAMSUNG DVD-ROM SD-612> at ata0-master PIO4
acd1: CD-RW <CD-R/RW RW7083A> at ata1-master PIO4
Mounting root from ufs:/dev/ar0s3a
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: lost blocks 10 files 2
/usr: superblock summary recomputed
WARNING: /var was not properly dismounted
linprocfs registered
de0: autosense failed: cable problem?
