Hi,
>>> Mike Smith wrote:
> I've just committed a slightly different patch, based on a mix of your
> ideas and mine (mostly yours). Can you test the -current code, and let
> me know what I broke this time? 8)
As haro wrote, acpi_pcib.c rev1.11 + neckpain's patch does work
on my machine too. But rev1.12 cause panic while booting on my
PCG-C1VSX/K (NEWCARD + acpica).
pccbb0: <RF5C475 PCI-CardBus Bridge> at device 12.0 on pci0
pccbb0: PCI Memory allocated: 44000000
acpi_pcib0: matched entry for 0.12.INTA (source \_SB_.LINKB)
acpi_pcib0: possible interrupts: 9
acpi_pcib0: couldn't route interrupt 9 via \_SB_.LINKB - AE_BAD_PARAMETER
pccbb: Unable to map IRQ...
panic: resource_list_release: can't find resource
Debugger("panic")
Stopped at Debugger+0x44: pushl %ebx
db>
dmesg with acpi_pcib.c rev1.11 + neckpain's patch is as follows
ACPI debug layer 0x0 debug level 0x0
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Jul 29 15:46:16 JST 2001
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/ALASKAN
Timecounter "i8254" frequency 1193182 Hz
CPU: Transmeta(tm) Crusoe(tm) Processor TM5600 (661.67-MHz 586-class CPU)
Origin = "GenuineTMx86" Id = 0x543
real memory = 117374976 (114624K bytes)
avail memory = 108027904 (105496K bytes)
Preloaded elf kernel "kernel" at 0xc05f9000.
WARNING: Driver mistake: destroy_dev on 154/0
Using $PIR table, 9 entries at 0xc00fdf30
acpi0: <SONY P1 > on motherboard
Timecounter "ACPI" frequency 3579545 Hz
acpi_cpu0: <CPU> on acpi0
acpi_cpu: CLK_VAL field overflows P_CNT register
acpi_cpu: CLK_VAL field overlaps THT_EN bit
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> on acpi0
pci0: <PCI bus> on acpi_pcib0
pci0: <memory, RAM> at 0.1 (no driver attached)
pci0: <memory, RAM> at 0.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1000-0x100f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1020-0x103f irq 9 at device
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Philips Semiconductors hub, class 9/0, rev 1.10/1.10, addr 2
uhub1: 2 ports with 2 removable, self powered
ugen0: Sony USB Memory Stick Slot, rev 1.10/1.80, addr 3
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
pci0: <serial bus, FireWire> at 8.0 (no driver attached)
pcm0: <Yamaha DS-1E (YMF754)> mem 0xfc108000-0xfc10ffff irq 9 at device 9.0 on pci0
pci0: <simple comms> at 10.0 (no driver attached)
pci0: <multimedia> at 11.0 (no driver attached)
pccbb0: <RF5C475 PCI-CardBus Bridge> at device 12.0 on pci0
pccbb0: PCI Memory allocated: 44000000
acpi_pcib0: matched entry for 0.12.INTA (source \\_SB_.LNKB)
acpi_pcib0: possible interrupts: 9
acpi_pcib0: routed interrupt 9 via \\_SB_.LNKB
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pci0: <display, VGA> at 13.0 (no driver attached)
acpi_ec0: <embedded controller> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
(omitting the rest)
--
Yoichi Nakayama <[EMAIL PROTECTED]>
E-ken, Dept. of Physics, Nagoya University
http://www.eken.phys.nagoya-u.ac.jp/~yoichi/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
