On Mon, Apr 02, 2001 at 05:41:45PM -0400, Andrew Gallatin wrote:
> The problem is that the lca gives totally bogus intline values that
> aren't 255; so the MI code thinks they are valid & never calls the
> platform specific inter_route code to correct them.
>
> Please try the appended fix, which is basically what we do on x86 SMP.
>
> Matt Dodd said he had a better idea, but it doesn't look like he had
> time to implement it. Mike Smith suggested it, and if it works for you,
> I'll commit it.
Now there are some odd intr_map messages and the irq isn't shown in
the first line from the device but at least the dc0 interface works.
Peter Jeremy pointed me to a patch from Matt Dodd, which I will test
later. He send the mail to -alpha.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Mon Apr 2 23:56:44 CEST 2001
[EMAIL PROTECTED]:/var/d8/src-2001-03-28/src/sys/compile/CICELY10
DEC AXPpci
Alpha PC AXPpci33, 166MHz
8192 byte page size, 1 processor.
CPU: LCA Family major=4 minor=2
OSF PAL rev: 0x100090002012d
real memory = 31481856 (30744K bytes)
avail memory = 24649728 (24072K bytes)
Preloaded elf kernel "kernel" at 0xfffffc000067a000.
lca0: <21066 Core Logic chipset>
dec_axppci_33_intr_map: weird slot number 0
dec_axppci_33_intr_map: weird slot number 0
dec_axppci_33_intr_map: weird slot number 0
dec_axppci_33_intr_map: weird slot number 0
^^^^^^^^^^^^^^^^^^^^^^
pci0: <PCI bus> on pcib0
sym0: <810> port 0x10000-0x100ff mem 0x81040400-0x810404ff at device 6.0 on pci0
^^^^ no irq printed
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at ISA irq 11
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
dc0: <Intel 21143 10/100BaseTX> port 0x10180-0x101ff mem 0x81040000-0x810403ff at
device 11.0 on pci0
^^^^ no
irq printed
dc0: interrupting at ISA irq 5
dc0: Ethernet address: 00:00:cb:56:2e:2a
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x81040500-0x8104057f at device
12.0 on pci0
de0: interrupting at ISA irq 9
de0: Cogent 21040 [10Mb/s] pass 2.3
de0: address 00:00:92:90:7f:26
--
B.Walter COSMO-Project http://www.cosmo-project.de
[EMAIL PROTECTED] Usergroup [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
