Looks like I've got a similar problem only its aic7880/wide
I've got a Dell optiplex 450 with an Adaptec 2940uw controller which can
boot but can't "mountroot".
A kernel from last week can see the aic7880/wide but a kernel from the past
couple days cannot.
OK dmesg:
FreeBSD 5.0-CURRENT #10: Mon Mar 12 12:17:02 CST 2001
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
...
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
pcib2: <PCI-PCI bridge> at device 15.0 on pci0
pci2: <PCI bus> on pcib2
ahc0: <Adaptec 2940 Pro Ultra SCSI adapter> port 0xdc00-0xdcff mem
0xfafff000-0xfaffffff irq 14 at device 10.0 on pci2
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
Bad dmesg: same thing but:
"ahc0 Platform free" instead of aic7880 line.
Here is pciconf -l
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03
hdr=0x00
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01
hdr=0x00
uhci0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
none0@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
pcib2@pci0:15:0: class=0x060400 card=0x000000dc chip=0x00241011 rev=0x03
hdr=0x01
xl0@pci0:17:0: class=0x020000 card=0x00821028 chip=0x905510b7 rev=0x24 hdr=0x00
none1@pci1:0:0: class=0x030000 card=0x40821028 chip=0x47421002 rev=0x5c hdr=0x00
ahc0@pci2:10:0: class=0x010000 card=0x78879004 chip=0x87789004 rev=0x01 hdr=0x00
Later
Mark Hittinger
Earthlink
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
