The last couple of kernel builds (with cvs updates and buildworlds inbetween) have failed with messages as below. I assume I need to add something to my kernel config file so I have attached it. cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys/dev -I/usr/src/sys/../include -I/usr/src/sys/contrib/dev/acpica/Subsystem/Include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 /usr/src/sys/kern/kern_mutex.c /usr/src/sys/kern/kern_mutex.c:593: warning: no previous prototype for `_mtx_assert' /usr/src/sys/kern/kern_mutex.c: In function `_mtx_assert': /usr/src/sys/kern/kern_mutex.c:595: `MA_OWNED' undeclared (first use in this function) /usr/src/sys/kern/kern_mutex.c:595: (Each undeclared identifier is reported only once /usr/src/sys/kern/kern_mutex.c:595: for each function it appears in.) /usr/src/sys/kern/kern_mutex.c:596: `MA_RECURSED' undeclared (first use in this function) /usr/src/sys/kern/kern_mutex.c:597: `MA_NOTRECURSED' undeclared (first use in this function) /usr/src/sys/kern/kern_mutex.c:610: `MA_NOTOWNED' undeclared (first use in this function) /usr/src/sys/kern/kern_mutex.c:595: warning: unreachable code at beginning of switch statement *** Error code 1 /usr/src/UPDATING provides no insight.
# $FreeBSD: MATT,v 22.8 2001/03/03 15:26:00 +10:30 matt Exp $ # Based on: $FreeBSD: src/sys/i386/conf/NOTES,v 1.899 2001/03/02 05:57:39 markm Exp $ machine i386 options INCLUDE_CONFIG_FILE # Include this file in kernel cpu I686_CPU ident MATT maxusers 64 options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options MFS # Memory Filesystem options NFS # Network Filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem options DEVFS # Devices filesystem options SOFTUPDATES # Enable FFS soft updates support options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=300 # Delay (in ms) before probing SCSI options DDB # Enable the kernel debugger options KTRACE # Kernel tracing (SYSV emul requirement) options INVARIANT_SUPPORT # Support modules built with INVARIANTS options UCONSOLE # Allow users to grab the console options USERCONFIG # Boot -c editor options VISUAL_USERCONFIG # Visual boot -c editor options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options SHMALL=16384 options SHMMAXPGS=4096 options SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)" options SHMSEG=50 options SHMMNI=64 options SEMMNI=32 options SEMMNS=128 # System V compatible message queues # Please note that the values provided here are used to test kernel # building. The defaults in the sources provide almost the same numbers. # MSGSSZ must be a power of 2 between 8 and 1024. options MSGMNB=2049 # Max number of chars in queue options MSGMNI=41 # Max number of message queue identifiers options MSGSEG=2049 # Max number of message segments options MSGSSZ=16 # Size of a message segment options MSGTQL=41 # Max number of messages in system options P1003_1B # Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options KBD_INSTALL_CDEV # Install a CDEV entry in /dev options NCP # NetWare Core protocol options NWFS # Netware filesystem options VFS_AIO # Real aio_* system calls options ENABLE_VFS_IOOPT # IO optimization through VM system when vfs.ioopt > 0 options MSGBUF_SIZE=40960 # Size of the kernel message buffer options COMPAT_LINUX # Linux ABI emulation options LINPROCFS # Linux-like proc filesystem support #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # PECOFF module (Win32 Execution Format) #options PECOFF_SUPPORT #options PECOFF_DEBUG device isa device pci device agp options AUTO_EOI_1 # Save 0.7-1.25 usec for each interrupt # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID # Static device numbering options ATA_ENABLE_ATAPI_DMA # Enable DMA on ATAPI devices options ATA_ENABLE_TAGS # Enable tagged queuing if poss options ATA_ENABLE_WC # Enable write caching (for tags) # SCSI Controllers device sym # NCR/Symbios Logic (newer chipsets) # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device vga options VESA # splash screen/screen saver device splash # syscons is the default console driver, resembling an SCO console device sc 1 options MAXCONS=12 # Number of virtual consoles options SC_HISTORY_SIZE=400 # Number of history buffer lines options SC_DISABLE_REBOOT # Disable Ctrl-Alt-Del reboot options SC_NORM_ATTR="(FG_GREEN|BG_BLACK)" options SC_NORM_REV_ATTR="(FG_YELLOW|BG_GREEN)" options SC_KERNEL_CONS_ATTR="(FG_RED|BG_BLACK)" options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_RED)" #options SC_DEBUG_LEVEL=5 # Syscons debug level #options SC_RENDER_DEBUG # syscons rendering debugging #options VFS_BIO_DEBUG # VFS buffer I/O debugging # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc 1 device atkbd device psm # Floating point support - do not disable. device npx # Power management support (see LINT for more options) device apm # Serial (COM) ports device sio options BREAK_TO_DEBUGGER # A BREAK on a comconsole goes to DDB # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') # Pseudo devices - the number indicates how many units to allocated. device loop # Network loopback device ether # Ethernet support device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device vn # Vnode (turn a file into a device) device gif 4 # IPv6 and IPv4 tunneling device faith 1 # IPv6-to-IPv4 relaying (translation) device random # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter options PPP_FILTER # Enable bpf filtering (needs bpf) # USB support device uhci # UHCI PCI->USB interface device usb # USB Bus (required) device ukbd # Keyboard device ums # Mouse # Sound device pcm device sbc device midi device seq device smbus device iicbus device iicbb device intpm device smb device ichsmb device bktr 1 # Brooktree BT848 support options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL device tdfx # Enable 3Dfx Voodoo support options TDFX_LINUX # Enable Linuxulator support # ACPI support based on Intels ACPI component architecture device acpica # pmtimer: Timer device driver for power management events (APM or ACPI) device pmtimer # Adjust system timer at wakeup time
