I tried to post this before, but, I think it got lost.
I have a repeatable hang with -current when attempting to print a
region from emacs. This happened after 2 1/2 days uptime. The system
is frozen. The mouse does not move the pointer. The keyboard does
nothing - pressing Caps Lock does not turn on the LED.
On reboot, the system halts with a fatal trap 12,
when lpd starts. The system will not get past lpd starting until I
manually remove the files from /var/spool/lpd. Several empty err
files are generated in /var/spool/lpd.
I am running -current SMP.
# uname -a
FreeBSD celebris 5.0-CURRENT FreeBSD 5.0-CURRENT #0: \
Mon Dec 18 21:55:43 PST 2000 \
root@celebris:/usr/src/sys/compile/CELEBRIS-SMP i386
# uptime
9:06PM up 1 day, 9:44, 5 users, load averages: 0.00, 0.05, 0.08
Dmesg and my kernel config are attached. What can I do to provide
more information?
tomdean
=== dmesg ===================
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Dec 18 21:55:43 PST 2000
root@celebris:/usr/src/sys/compile/CELEBRIS-SMP
Timecounter "i8254" frequency 1193023 Hz
CPU: Pentium/P54C (122.66-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping = 5
Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory = 100663296 (98304K bytes)
avail memory = 94666752 (92448K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00030010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00030010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0322000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03220a8.
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
ncr0: <ncr 53c810 fast10 scsi> port 0xec00-0xecff mem 0xfedfbf00-0xfedfbfff irq 11 at
device 1.0 on pci0
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
vga_pci0: <VGA-compatible display device> mem
0xfe000000-0xfe7fffff,0xfedfc000-0xfedfffff irq 9 at device 6.0 on pci0
de0: <Digital 21041 Ethernet> port 0xe880-0xe8ff mem 0xfedfbe80-0xfedfbeff irq 10 at
device 8.0 on pci0
de0: DEC DE450-CA 21041 [10Mb/s] pass 1.1
de0: address 00:00:f8:02:76:db
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <IBM Enhanced (101/102-key) KC> can't assign resources
unknown: <Microsoft PS/2 Mouse> can't assign resources
unknown: <16550 compatible COM device> can't assign resources
unknown: <16550 compatible COM device> can't assign resources
unknown: <LPT printer port> can't assign resources
unknown: <Floppy Controller> can't assign resources
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 10 seconds for SCSI devices to settle
de0: enabling 10baseT port
cd0 at ncr0 bus 0 target 5 lun 0
cd0: <TOSHIBA CD-ROM XM-5401TA 3605> Removable CD-ROM SCSI-2 device
cd0: 4.237MB/s transfers (4.237MHz, offset 8)
cd0: cd present [329507 x 2048 byte records]
da2 at ncr0 bus 0 target 2 lun 0
da2: <QUANTUM FIREBALL ST3.2S 0F0C> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da2: 3090MB (6328861 512 byte sectors: 255H 63S/T 393C)
da0 at ncr0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL1080S 1Q09> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8)
da0: 1042MB (2134305 512 byte sectors: 255H 63S/T 132C)
Mounting root from ufs:/dev/da1s1a
da1 at ncr0 bus 0 target 1 lun 0
da1: <IBM DNES-309170 SAH0> Fixed Direct Access SCSI-3 device
da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
WARNING: / was not properly dismounted
SMP: AP CPU #1 Launched!
de0: enabling 10baseT port
microuptime() went backwards (74920.124631 -> 74920.-694771956)
=== conifg ===========
machine i386
cpu I586_CPU
ident CELEBRIS
hints "CELEBRIS.hints"
maxusers 50
# SMP kernel config file options:
# Required:
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# Lets always enable the kernel debugger for SMP.
options DDB
#makeoptions DEBUG=-g
##################################################################
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=10000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options MSGBUF_SIZE=(10*PAGE_SIZE) #System Message Buffer Size
options SYSVSHM # for X11
options SYSVSEM # for X11
options SYSVMSG # for X11
options CLK_USE_I8254_CALIBRATION
device random #entropy device
#options PSM_CHECKSYNC # resync when switch console modes
#config kernel root on da1
device isa
device pci
#options COMPAT_OLDPCI #Use PCI shims and glue for old drivers
device fdc
#
# FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
# gotta turn it actually on by setting the variable fd_debug with DDB,
# however.
options FDC_DEBUG
#tape ft0 at fdc0 drive 2
device ncr
device scbus
device da # SCSI Direct Access Device
device sa # SCSI Tape
device cd #Only need one of these, the code dynamically grows
# The keyboard device; it controlls the keyboard and the PS/2 mouse.
device atkbdc
# The AT keyboard
device atkbd
# `flags' for atkbd:
# 0x01 Force detection of keyboard, else we always assume a keyboard
# 0x02 Don't reset keyboard, useful for some newer ThinkPads
# 0x04 Old-style (XT) keyboard support, useful for older ThinkPads
device psm
# The video card driver.
device vga
# Splash screen at start up! Screen savers require this too.
device splash
# syscons is the default console driver, resembling an SCO console
device sc
device npx
device sio
# Parallel-Port Bus
# nlpt Parallel Printer
device ppbus
device lpt
device ppc
device de # DEC DC21040 Ethernet Adapter
device loop
device ether
device tun 1
device bpf 4 #Berkeley packet filter
device vn #Vnode driver (turns a file into a device)
device pty 16
device gzip # Exec gzipped a.out's
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options KTRACE #kernel tracing
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
