I cvsuped current ~2000/12/11 @ ~ 22:00, the previous version was
from around 2000/12/07. Before the update my Dual intel nic was
happy .... post update the nic isn't even probed.
attached is a pciconf -v -l from before and after as well as a
a boot -v from after. If you need more info let me know and I'll
go back to the 2000/12/11 kernel.
Greg
--
Email: [EMAIL PROTECTED] ICQ: 93234105
#575 Sun Life Place * 10123 99 Street * Edmonton, AB * Canada * T5J 3H1
-- --
When things can't get any worse, they simplify themselves by getting a
whole lot worse then complicated. A complete and utter disaster is the
simplest thing in the world; it's preventing one that's complex.
(Janet Morris)
Script started on Tue Dec 12 03:07:05 2000
IN /usr/sbin AT Tue Dec 12-03:07:05
ON mage:skafte [4999] > uname -a
FreeBSD mage.trollkarl.net 5.0-CURRENT FreeBSD 5.0-CURRENT #2: Thu Dec 7 22:40:54 MST
2000 [EMAIL PROTECTED]:/usr/src/sys/compile/MAGE i386
IN /usr/sbin AT Tue Dec 12-03:07:08
ON mage:skafte [5000] > sudo pciconf -l -v
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x12378086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82441FX PCI & Memory Controller (PMC)'
class = bridge
subclass = HOST-PCI
isab0@pci0:1:0: class=0x060100 card=0x00000000 chip=0x70008086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371SB PIIX3 PCI-to-ISA Bridge (Triton II)'
class = bridge
subclass = PCI-ISA
atapci0@pci0:1:1: class=0x010180 card=0x00000000 chip=0x70108086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
device = '82371SB PIIX3 IDE Interface (Triton II)'
class = mass storage
subclass = ATA
none0@pci0:10:0: class=0x030000 card=0x00000000 chip=0x00b81013 rev=0x00
hdr=0x00
vendor = 'Cirrus Logic'
device = 'CL-GD5446 64-bit VisualMedia Accelerator'
class = display
subclass = VGA
pcib1@pci0:13:0: class=0x060400 card=0x000000dc chip=0x00241011 rev=0x03
hdr=0x01
vendor = 'Digital Equipment Corporation'
device = 'DC21151/2 PCI-PCI Bridge'
class = bridge
subclass = PCI-PCI
fxp0@pci1:4:0: class=0x020000 card=0x10f08086 chip=0x12298086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82557/8/9 Fast Ethernet LAN Controller'
class = network
subclass = ethernet
fxp1@pci1:5:0: class=0x020000 card=0x10f08086 chip=0x12298086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82557/8/9 Fast Ethernet LAN Controller'
class = network
subclass = ethernet
# pciconf -v -0
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x12378086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82441FX PCI & Memory Controller (PMC)'
class = bridge
subclass = HOST-PCI
isab0@pci0:1:0: class=0x060100 card=0x00000000 chip=0x70008086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371SB PIIX3 PCI-to-ISA Bridge (Triton II)'
class = bridge
subclass = PCI-ISA
atapci0@pci0:1:1: class=0x010180 card=0x00000000 chip=0x70108086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
device = '82371SB PIIX3 IDE Interface (Triton II)'
class = mass storage
subclass = ATA
vga_pci0@pci0:10:0: class=0x030000 card=0x00000000 chip=0x00b81013 rev=0x00
hdr=0x00
vendor = 'Cirrus Logic'
device = 'CL-GD5446 64-bit VisualMedia Accelerator'
class = display
subclass = VGA
pcib1@pci0:13:0: class=0x060400 card=0x000000dc chip=0x00241011 rev=0x03
hdr=0x01
vendor = 'Digital Equipment Corporation'
device = 'DC21151/2 PCI-PCI Bridge'
class = bridge
subclass = PCI-PCI
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Tue Dec 12 02:14:20 MST 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/MAGE
Calibrating clock(s) ... TSC clock: 199430909 Hz, i8254 clock: 1193176 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 199432980 Hz
CPU: Pentium Pro (199.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x617 Stepping = 7
Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x0045e000 - 0x07ff7fff, 129605632 bytes (31642 pages)
avail memory = 126275584 (123316K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00faf20
bios32: Entry = 0xfb320 (c00fb320) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb350
pnpbios: Found PnP BIOS data at 0xc00fbf10
pnpbios: Entry = f0000:bf38 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc0438000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04380a8.
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 02 01 6d 27 00 c0 00 00 00 00 14 00
00 01 10 00 03 01 04 01 00 01 01 01 05 01 11 01
14 01 10 01 13 01 02 01 06 01 12 01 7c 00 ff ff
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 13 mode(s) found
VESA: v1.2, 1024k memory, flags:0x0, mode table:0xc03bdb54 (1000014)
VESA: Cirrus Logic GD-5436/46 VGA
Creating DISK md0
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
found-> vendor=0x8086, dev=0x1237, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7000, revid=0x01
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7010, revid=0x00
bus=0, slot=1, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x1013, dev=0x00b8, revid=0x00
bus=0, slot=10, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 3, range 32, base e0000000, size 24, enabled
found-> vendor=0x1011, dev=0x0024, revid=0x03
bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=0 secondarybus=0
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 1.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=14 b=eb
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 status0=50 status1=50
ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=50 status1=50
ata1-master: ATA probe a=01 b=a5
ata1-slave: ATA probe a=01 b=a5
ata1: devices=03
ata1: at 0x170 irq 15 on atapci0
vga_pci0: <VGA-compatible display device> mem 0xe0000000-0xe0ffffff at device 10.0 on
pci0
pcib1: <PCI-PCI bridge> at device 13.0 on pci0
pcib1: secondary bus 6
pcib1: subordinate bus 6
pcib1: I/O decode 0x60000-0x60fff
pcib1: memory decode 0x0-0xfffff
pcib1: prefetched decode 0x0-0xfffff
pci1: physical bus=6
pci1: <PCI bus> on pcib1
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 13 devices, largest 164 bytes
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: end config
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: end config
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: end config
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: end config
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: end config
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
PNP0800: end config
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: end config
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
PNP0c01: end config
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: end config
pnpbios: handle 8 device ID PNP0a03 (030ad041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 9 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: adding irq mask 0x40
PNP0700: end config
pnpbios: handle 10 device ID PNP0700 (0007d041)
PNP0401: adding dma mask 0x8
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0
PNP0401: adding irq mask 0x80
PNP0401: end config
pnpbios: handle 11 device ID PNP0401 (0104d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 12 device ID PNP0501 (0105d041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
pcm0 failed to probe at port 0x530-0x537 irq 10 drq 1 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
pca0: <AT-style speaker sound> at port 0x61 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
BIOS Geometries:
0:030c7f3f 0..780=781 cylinders, 0..127=128 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03c77f3f 0..967=968 cylinders, 0..127=128 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
DUMMYNET initialized (000608)
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding enabled,
default to accept, logging limited to 10000 packets/entry by default
bpf: ds0 attached
BRIDGE 990810, have 7 interfaces
IPsec: Initialized Security Association Processing.
ata0-master: success setting WDMA2 on PIIX3 chip
Creating DISK ad0
ad0: <QUANTUM FIREBALL EX3.2A/A0A.0400> ATA-4 disk at ata0-master
ad0: 3079MB (6306048 sectors), 6256 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, WDMA2
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 3079MB <QUANTUM FIREBALL EX3.2A> [6256/16/63] at ata0-master WDMA2
ata1-master: success setting WDMA2 on PIIX3 chip
Creating DISK ad2
ad2: <QUANTUM FIREBALLP KX13.6/A1S.3700> ATA-4 disk at ata1-master
ad2: 13072MB (26771672 sectors), 26559 cyls, 16 heads, 63 S/T, 512 B/S
ad2: 16 secs/int, 1 depth queue, WDMA2
ad2: piomode=4 dmamode=2 udmamode=4 cblid=1
ad2: 13072MB <QUANTUM FIREBALLP KX13.6> [26559/16/63] at ata1-master WDMA2
ata1-slave: success setting WDMA2 on PIIX3 chip
Creating DISK ad3
ad3: <WDC AC34000L/30.41F32> ATA-3 disk at ata1-slave
ad3: 3815MB (7814016 sectors), 7752 cyls, 16 heads, 63 S/T, 512 B/S
ad3: 16 secs/int, 1 depth queue, WDMA2
ad3: piomode=4 dmamode=2 udmamode=-1 cblid=0
ad3: 3815MB <WDC AC34000L> [7752/16/63] at ata1-slave WDMA2
ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-slave: success setting PIO4 on generic chip
acd0: <CREATIVE CD5230E/C1.01> CDROM drive at ata0 as slave
acd0: 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 6306047, size 6305985 : OK
start_init: trying /sbin/init
ad3: READ command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=50 status1=50
ata1-master: ATA probe a=01 b=a5
ata1-slave: ATA probe a=01 b=a5
ata1: devices=03
ata1-master: success setting WDMA2 on PIIX3 chip
ata1-slave: success setting WDMA2 on PIIX3 chip
done
ad3: READ command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=50 status1=50
ata1-master: ATA probe a=01 b=a5
ata1-slave: ATA probe a=01 b=a5
ata1: devices=03
ata1-master: success setting WDMA2 on PIIX3 chip
ata1-slave: success setting WDMA2 on PIIX3 chip
done
ad3: READ command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=50 status1=50
ata1-master: ATA probe a=01 b=a5
ata1-slave: ATA probe a=01 b=a5
ata1: devices=03
ata1-master: success setting WDMA2 on PIIX3 chip
ata1-slave: success setting WDMA2 on PIIX3 chip
done
ad3: READ command timeout tag=0 serv=0 - resetting
ata1-slave: success setting PIO4 on generic chip
ad3: trying fallback to PIO mode
ata1: resetting devices .. ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=50 status1=50
ata1-master: ATA probe a=01 b=a5
ata1-slave: ATA probe a=01 b=a5
ata1: devices=03
ata1-master: success setting WDMA2 on PIIX3 chip
ata1-slave: success setting PIO4 on generic chip
done
ad3s1: type 0xa5, start 63, end = 7814015, size 7813953 : OK
ad2: READ command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=50 status1=50
ata1-master: ATA probe a=01 b=a5
ata1-slave: ATA probe a=01 b=a5
ata1: devices=03
ata1-master: success setting WDMA2 on PIIX3 chip
ata1-slave: success setting PIO4 on generic chip
done
ad2: READ command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=50 status1=50
ata1-master: ATA probe a=01 b=a5
ata1-slave: ATA probe a=01 b=a5
ata1: devices=03
ata1-master: success setting WDMA2 on PIIX3 chip
ata1-slave: success setting PIO4 on generic chip
done
ad2: READ command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=50 status1=50
ata1-master: ATA probe a=01 b=a5
ata1-slave: ATA probe a=01 b=a5
ata1: devices=03
ata1-master: success setting WDMA2 on PIIX3 chip
ata1-slave: success setting PIO4 on generic chip
done
ad2: READ command timeout tag=0 serv=0 - resetting
ata1-master: success setting PIO4 on generic chip
ad2: trying fallback to PIO mode
ata1: resetting devices .. ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=50 status1=50
ata1-master: ATA probe a=01 b=a5
ata1-slave: ATA probe a=01 b=a5
ata1: devices=03
ata1-master: success setting PIO4 on generic chip
ata1-slave: success setting PIO4 on generic chip
done
ad2s1: type 0xa5, start 63, end = 26764289, size 26764227 : OK
ad2s1: type 0xa5, start 63, end = 26764289, size 26764227 : OK
