What happens if you ``disable acfcomp protocomp'' and ``deny acfcomp
protocomp'' in your config ?
This should be negotiable with isdn.... but perhaps our requesting it
is upsetting the peer ?
> It still doesn't work sometimes.
>
> I have a complete log (From dialing to hangup) at
> http://www.neland.dk/arnold.log
> My ppp.conf is at http://www.neland.dk/arnold.conf
>
> Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRU[4] 1500
> Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
> Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c
> Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2]
> Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ACFCOMP[2]
> Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506
> Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC
> 00:10:bc:06:fa:00
> Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: LayerStart
> Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: State change Stopped -->
> Ack-Se
> nt
> Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: RecvConfigReq(2) state =
> Ack-Se
> nt
> Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500
> Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
> Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c
> Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2]
> Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ACFCOMP[2]
> Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506
> Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC
> 00:10:bc:06:fa:00
> Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: SendConfigAck(2) state =
> Ack-Se
> nt
> Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500
> Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
>
> ----- Original Message -----
> From: "Brian Somers" <[EMAIL PROTECTED]>
> To: "Leif Neland" <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> Sent: Wednesday, November 29, 2000 2:10 AM
> Subject: Re: How to debug ppp
>
>
> > Well, I haven't seen this before !!!
> >
> > Your ISP is *insisting* that you negotiate a multi-link connection.
> > You can do this by simply adding
> >
> > set mrru 1506
> >
> > to your config.
> >
> > > I sometimes have trouble connecting to my flat-rate isp via i4bsd.
> > > Most of the time it works, but sometimes the handshake fails.
> > > What is the log trying to tell me here? What can I tell my isp?
> > >
> > > When it fails, I can connect to another isp, which charges per minute
> > > charges, which I rather not use
> > > when I have flat rate.
> > >
> > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: Phone: xxxxxxxxx
> > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: Connected!
> > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: opening -> dial
> > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: 1: Dial attempt 1 of 2
> > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: dial -> carrier
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: /dev/i4brbch0: CD
> detected
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: carrier -> login
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: login -> lcp
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: FSM: Using "1" as a
> transport
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Initial -->
> > > Closed
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: Entering STOPPED state
> for
> > > 2 s
> > > econds
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Closed -->
> > > Stopped
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(1) state =
> > > Stopped
> > >
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2]
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ACFCOMP[2]
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC
> > > 00:10:bc:06:fa:00
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigReq(1) state =
> > > Stopped
> > >
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x0bde8bbc
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(1) state =
> > > Stopped
> > >
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: LayerStart
> > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Stopped -->
> > > Req-Sent
> > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(2) state =
> > > Req-Sent
> > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRU[4] 1500
> > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
> > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450
> > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2]
> > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ACFCOMP[2]
> > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506
> > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC
> > > 00:10:bc:06:fa:00
> > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(2) state =
> > > Req-Sent
> > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506
> > > Looping:
> > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(3) state =
> > > Req-Sent
> > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRU[4] 1500
> > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
> > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450
> > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2]
> > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: ACFCOMP[2]
> > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506
> > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC
> > > 00:10:bc:06:fa:00
> > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(3) state =
> > > Req-Sent
> > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506
> > > Until hangup
> > >
> > > Leif
--
Brian <[EMAIL PROTECTED]> <brian@[uk.]FreeBSD.org>
<http://www.Awfulhak.org> <brian@[uk.]OpenBSD.org>
Don't _EVER_ lose your sense of humour !
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
