Hi,
it seems to be a ata issue because it worked before some ata-updates (after
SMPng).
Attached is a (verbose)dmesg output during startup and insertion.
BTW: Why does it try to become ata4?
I have two ATA-Slots with disks in my TECRA-8000 notebook.
They are attached as ata0 and ata1 (master).
So the next slot should become ata2.
Is something eating up resources?
APA-SCSI and 3COM-Ethernet do work as expected.
Is anyone using SANDISK SmartMedia successfully with -cuurent?
Bye!
----
Michael Reifenberger
^.*Plaut.*$, IT, R/3 Basis, GPS
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Oct 15 23:27:44 CEST 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/nihil
Calibrating clock(s) ... TSC clock: 266607389 Hz, i8254 clock: 1193150 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268369920 (262080K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00340000 - 0x0ffe7fff, 264929280 bytes (64680 pages)
config> #flags wdc0 0xa0ffa0ff
Invalid command or syntax. Type `?' for help.
config> #flags wdc1 0xa0ffa0ff
Invalid command or syntax. Type `?' for help.
config> #iosiz npx0 196608
Invalid command or syntax. Type `?' for help.
config> #irq pcic0 11
Invalid command or syntax. Type `?' for help.
config> quit
avail memory = 258068480 (252020K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fc470
bios32: Entry = 0xfc480 (c00fc480) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x827
pnpbios: Found PnP BIOS data at 0xc00fed00
pnpbios: Entry = f0000:92e4 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 7933f351
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc0327000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03270a8.
Preloaded elf module "linux.ko" at 0xc03270f8.
Preloaded elf module "linprocfs.ko" at 0xc0327198.
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 20 01 00 01 00 00 00 00 22 00
00 01 27 00 13 00 00 01 00 01 09 01 00 01 1b 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 07 01
08 01 0d 01 0e 01 10 01 11 01 12 01 13 01 14 01
VESA: 25 mode(s) found
VESA: v2.0, 2496k memory, flags:0x0, mode table:0xc02ae002 (1000022)
VESA: MagicGraph 256 AV 44K PRELIMINARY
VESA: NeoMagic MagicMedia 256 AV 01.0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7192, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x10c8, dev=0x0005, revid=0x12
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 3, range 32, base df000000, size 24, enabled
map[14]: type 1, range 32, base ff800000, size 22, enabled
map[18]: type 1, range 32, base ff700000, size 20, enabled
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=5, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=5, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 4, range 32, base 0000fe60, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=5, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 4, range 32, base 0000ffe0, size 5, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=5, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 4, range 32, base 0000fe70, size 4, enabled
found-> vendor=0x1179, dev=0x0701, revid=0x23
bus=0, slot=9, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 4, range 32, base 0000ff80, size 5, enabled
found-> vendor=0x1179, dev=0x060f, revid=0x05
bus=0, slot=11, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=14 secondarybus=14
intpin=a, irq=255
found-> vendor=0x1179, dev=0x060f, revid=0x05
bus=0, slot=11, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=15 secondarybus=15
intpin=b, irq=255
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicMedia 256AV SVGA controller> (vendor=0x10c8, dev=0x0005) at 4.0
irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfe60
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfe68
ata1: mask=03 status0=50 status1=00
ata1: mask=03 status0=50 status1=00
ata1: devices = 0x1
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 5.2 irq
11
pci0: <Intel 82371AB Power management controller> (vendor=0x8086, dev=0x7113) at 5.3
pci0: <Toshiba Fast Infra Red controller> (vendor=0x1179, dev=0x0701) at 9.0 irq 11
pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0
pcic-pci0: Legacy address set to 0x3e0
PCI Config space:
00: 060f1179 04800007 06070005 00820000
10: 00000000 04800000 00141400 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 008001ff
40: 00011179 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 00000000 00000000 00000000 01000000
90: 00000000 00000000 00000000 00000000
Cardbus Socket registers:
00: f000ef6f: f000ef6f: f000e2c3: f000ef6f:
10: f000ef6f: c00043b2: f0008cbe: f000ef6f:
ExCa registers:
00: 13 88 f5 5a 72 d0 80 e1 3f 74 c8 fa 66 8b 46 08
10: 52 66 0f b6 d9 66 31 d2 66 f7 f3 88 eb 88 d5 43
20: 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 00 00 fb 77
30: a2 86 c4 c0 c8 02 08 e8 40 91 88 fe 28 e0 8a 66
pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0
PCI Config space:
00: 060f1179 04800007 06070005 00820000
10: 00000000 04800000 00151500 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 008002ff
40: 00011179 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 00000000 00000000 00000000 01000000
90: 00000000 00000000 00000000 00000000
Cardbus Socket registers:
00: f000ef6f: f000ef6f: f000e2c3: f000ef6f:
10: f000ef6f: c00043b2: f0008cbe: f000ef6f:
ExCa registers:
00: 13 88 f5 5a 72 d0 80 e1 3f 74 c8 fa 66 8b 46 08
10: 52 66 0f b6 d9 66 31 d2 66 f7 f3 88 eb 88 d5 43
20: 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 00 00 fb 77
30: a2 86 c4 c0 c8 02 08 e8 40 91 88 fe 28 e0 8a 66
pnpbios: 16 devices, largest 501 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: skipping empty range
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xffeffff, size=0xfef0000
PNP0c01: adding fixed memory32 range 0xfff0000-0xfffffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100a0000-0x100fffff, size=0x60000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: end config
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1
PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1
PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
PNP0000: end config
pnpbios: handle 3 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
PNP0100: end config
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
PNP0c04: end config
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
PNP0303: end config
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 8 device ID PNP0f13 (130fd041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
PNP0b00: end config
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1
PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1
PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1
PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1
PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1
PNP0c02: adding io range 0x6d-0x6d, size=0x1, align=0x1
PNP0c02: adding io range 0x6f-0x6f, size=0x1, align=0x1
PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x22-0x22, size=0x1, align=0x1
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1
PNP0c02: adding io range 0xfeac-0xfeac, size=0x1, align=0x1
PNP0c02: adding io range 0xfe00-0xfe41, size=0x42, align=0x1
PNP0c02: adding io range 0xfe50-0xfe57, size=0x8, align=0x1
PNP0c02: adding io range 0xfe70-0xfe7f, size=0x10, align=0x1
PNP0c02: adding io range 0xfe90-0xfe97, size=0x8, align=0x1
PNP0c02: adding io range 0xfe9e-0xfe9e, size=0x1, align=0x1
PNP0c02: adding irq mask 0x200
PNP0c02: end config
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 11 device ID PNP0700 (0007d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: end config
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0a03: end config
pnpbios: handle 17 device ID PNP0a03 (030ad041)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
PNP0e03: end config
pnpbios: handle 20 device ID PNP0e03 (030ed041)
YMH0021: adding io range 0x220-0x233, size=0x14, align=0x1
YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x1
YMH0021: adding io range 0x330-0x333, size=0x4, align=0x1
YMH0021: adding io range 0x538-0x539, size=0x2, align=0x1
YMH0021: adding irq mask 0x20
YMH0021: adding dma mask 0x2
YMH0021: adding dma mask 0x1
YMH0021: end config
pnpbios: handle 21 device ID YMH0021 (2100a865)
ata-: ata1 already exists, using ata2 instead
ata-: ata2 already exists, using ata3 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x1f0 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 12 02 3c
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x11 0x11
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
pcic0: <Intel i82365> at port 0x3e0-0x3e1 on isa0
pcic0: Polling mode
stat is f2
stat is f2
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
pcic1: Cannot get I/O range
pcic1 failed to probe at port 0x3e0-0x3e1 on isa0
pmtimer0 on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0700> failed to probe at port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37a on isa0
unknown: <PNP0e03> can't assign resources
unknown: <PNP0e03> at port 0x3e0-0x3e1 on isa0
pcm0: <Yamaha OPL-SAx> at port
0x220-0x233,0x530-0x537,0x388-0x38f,0x330-0x333,0x538-0x539 irq 5 drq 1,0 on isa0
Yamaha: ver 0x21 DMA config 0x85
pcm: setmap 916000, 1000; 0xca2a9000 -> 916000
pcm: setmap 917000, 1000; 0xca2aa000 -> 917000
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:0313fe3f 0..787=788 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
IP packet filtering initialized, divert enabled, rule-based forwarding disabled,
default to deny, logging limited to 100 packets/entry by default
bpf: lo0 attached
Linux-ELF exec handler installed
ata0-master: success setting UDMA2 on PIIX4 chip
Creating DISK ad0
ad0: <IBM-DARA-225000/SHAOA50A> ATA-4 disk at ata0-master
ad0: 24207MB (49577472 sectors), 49184 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad0: 24207MB <IBM-DARA-225000> [49184/16/63] at ata0-master UDMA33
ata1-master: success setting UDMA2 on PIIX4 chip
Creating DISK ad1
ad1: <IBM-DADA-26480/AD6OA42A> ATA-4 disk at ata1-master
ad1: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=4 dmamode=2 udmamode=2 cblid=0
ad1: 6194MB <IBM-DADA-26480> [13424/15/63] at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 46079711, size 46079649
ad0s1: C/H/S end 1023/15/63 (16435502) != end 46079711: invalid
ad0s2: type 0xc, start 46079712, end = 49576589, size 3496878 : OK
start_init: trying /sbin/init
ad1s1: type 0x7, start 63, end = 4192964, size 4192902 : OK
ad1s2: type 0xa5, start 4192965, end = 12685679, size 8492715 : OK
ad1s1: type 0x7, start 63, end = 4192964, size 4192902 : OK
ad1s2: type 0xa5, start 4192965, end = 12685679, size 8492715 : OK
ad1s1: type 0x7, start 63, end = 4192964, size 4192902 : OK
ad1s2: type 0xa5, start 4192965, end = 12685679, size 8492715 : OK
vn1: invalid primary partition table: no magic
vn1: invalid primary partition table: no magic
vn1: invalid primary partition table: no magic
vn1: invalid primary partition table: no magic
bpf: tun0 attached
Slot 1 chg = 0x8
pccard: card inserted, slot 1
pcic: I/O win 0 flags 17 240-24f
pcic: I/O win 0 flags 7 240-24f
pcic: I/O win 0 flags 17 240-24f
ata4: iobase=0x0240 altiobase=0x0248 bmaddr=0x0000
ata4: mask=03 status0=50 status1=00
ata4: mask=03 status0=50 status1=00
ata4: devices = 0x1
ata4 at port 0x240-0x24f irq 3 slot 1 on pccard1
ata4-master: ata_command: timeout waiting for intr
ata4-master: identify failed
