-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
-stable (world and kernel) built today seems to be causing the
system to cold boot when attempting to mount floppy disk on 2 of my
systems (held off on building the others) . This happens for
both ufs and msdos filesystems, and happens weather the machines are
booted from SMP kernels or not, SOFTUPDATES makes no difference either
(just thought I'd check). I have attempted hardware relpacement and that
also makes no difference. I figure since it is on 2 machines of the same
kind (with fresh bios flashes, tried that too ;) and just started after
booting on to new kernel and world built today that it is software, not
hardware..
I have attached a dmesg, and will open a formal PR tomorrow if
nobody just seems to know off the top of their head what's going on. (ok,
put on your telepathy hat) If there is more info that would be helpful, I
would be happy to provide it. I would attach a kernel dump, but the
machine just goes dead...
Last time world and kernel was built on these machines was 32 days
ago...
Help..
;)
Visigoth
Ps. I use tripwire from a ro floppy so my fd's are important on servers.
Damieon Stark
Sr. Unix Systems Administrator
[EMAIL PROTECTED]
PGP Public Key: www.telemere.net/~visigoth/visigoth.asc
____________________________________________________________________________
|
M$ -Where do you want to go today? |
Linux -Where do you want to go tomorrow?| FreeBSD - The POWER to serve
Freebsd -Are you guys coming or what? | http://www.freebsd.org
|
|
- ----------------------------------------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: PGP 6.5.1i
iQA/AwUBObbaBjnmC/+RTnGeEQKC6gCgwdG21L66l5y/7NpVnJIUdlYWs2wAn0SH
ukY7OYH284ushqnUFP8tv+zk
=NmF0
-----END PGP SIGNATURE-----
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #0: Wed Sep 6 12:28:02 CDT 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/MAIL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (550.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 1073733632 (1048568K bytes)
config> q
avail memory = 1042366464 (1017936K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0370000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc037009c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82454NX PXB#0, Bus#A> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Intel PIIX4 ATA controller> at 2.1
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 2.2 irq 0
Timecounter "PIIX" frequency 3579545 Hz
chip0: <Intel 82371AB Power management controller> port 0x850-0x85f at device 2.3 on
pci0
pci0: <ATI Mach64-GI graphics accelerator> at 4.0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd8c0-0xd8ff mem
0xfe400000-0xfe4fffff,0xfe600000-0xfe600fff irq 14 at device 8.0 on pci0
fxp0: Ethernet address 00:d0:b7:2c:32:37
dpt0: <DPT Caching SCSI RAID Controller> port 0xd8a0-0xd8bf irq 11 at device 10.0 on
pci0
dpt0: DPT PM3334UW FW Rev. 07M0, 1 channel, 64 CCBs
pcib3: <Intel 82454NX PCI Expander Bridge> at device 18.0 on pci0
pcib4: <Intel 82454NX PCI Expander Bridge> at device 19.0 on pci0
pcib5: <Intel 82454NX PCI Expander Bridge> at device 20.0 on pci0
pcib1: <Intel 82454NX PXB#0, Bus#B> on motherboard
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xec00-0xecff mem
0xfe802000-0xfe802fff irq 21 at device 4.0 on pci1
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem
0xfe801000-0xfe801fff irq 22 at device 6.0 on pci1
ahc1: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc2: <Adaptec aic7860 SCSI adapter> port 0xe400-0xe4ff mem 0xfe800000-0xfe800fff irq
20 at device 8.0 on pci1
ahc2: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs
pcib2: <Intel 82454NX PXB#1, Bus#A> on motherboard
pci2: <PCI bus> on pcib2
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem
0xfe900000-0xfe9fffff,0xfeb00000-0xfeb00fff irq 19 at device 1.0 on pci2
fxp1: Ethernet address 00:d0:b7:2c:29:d5
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
pass1 at dpt0 bus 0 target 6 lun 0
pass1: <DELL 1x8 U2W SCSI BP 5.23> Fixed Processor SCSI-2 device
da0 at dpt0 bus 0 target 0 lun 0
da0: <DPT RAID-5 07M0> Fixed Direct Access SCSI-2 device
da0: 34732MB (71131904 512 byte sectors: 255H 63S/T 4427C)
Mounting root from ufs:/dev/da0s1a
cd0 at ahc2 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:466 1.06> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
fd0c: hard error reading fsbn 16 of 16-31 (No status)
