On Feb 9, 2024, at 23:44, Bakul Shah <ba...@iitbombay.org> wrote:
> $ git bisect good
> b377ff8110e3489eb6e6b920b51a2384dfc4eb0b is the first bad commit
>
>> On Feb 9, 2024, at 8:13 PM, Mark Millard <mark...@yahoo.com> wrote:
>>
>> Summary:
>>
>> pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f
>> irq 80,81 on simplebus2
>> pcib0: parsing FDT for ECAM0:
>> pcib0: PCI addr: 0xc0000000, CPU addr: 0x600000000, Size: 0x40000000
>> . .
>> rman_manage_region: <pcib1 memory window> request: start 0x600000000, end
>> 0x6000fffff
>> panic: Failed to add resource to rman
>>
>>
>> Detail:
>>
>>
>> . .
>> pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f
>> irq 80,81 on simplebus2
>> pcib0: parsing FDT for ECAM0:
>> pcib0: PCI addr: 0xc0000000, CPU addr: 0x600000000, Size: 0x40000000
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>> pcib0: Bus is not cache-coherent
>> rman_reserve_resource_bound: <I/O memory addresses> request: [0xfd500000,
>> 0xfd50930f], length 0x9310, flags 100, device pcib0
>> rman_reserve_resource_bound: trying 0x1fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x1fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x31bfffff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x33296fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x39bf1fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x39c02fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x39c06fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x39c07fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x39c08fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x39c2afff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x39c36fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x39c37fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x3b03ffff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x3b04ffff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x3b2fffff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x3ee61fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x3ee63fff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0x3fffffff <0xfd500000,0x930f>
>> rman_reserve_resource_bound: tried 0xfbffffff <0xfd500000,0x930f>
>> considering [0xfc000000, 0xfd5d1fff]
>> truncated region: [0xfd500000, 0xfd50930f]; size 0x9310 (requested 0x9310)
>> candidate region: [0xfd500000, 0xfd50930f], size 0x9310
>> splitting region in three parts: [0xfc000000, 0xfd4fffff]; [0xfd500000,
>> 0xfd50930f]; [0xfd509310, 0xfd5d1fff]
>> rman_manage_region: <PCIe Memory> request: start 0xc0000000, end 0xffffffff
>> pcib0: hardware identifies as revision 0x304.
>> pcib0: note: reported link speed is 5.0 GT/s.
>> rman_reserve_resource_bound: <Interrupts> request: [0x51, 0x51], length 0x1,
>> flags 0, device pcib0
>> rman_reserve_resource_bound: trying 0 <0x51,0>
>> rman_reserve_resource_bound: tried 0 <0x51,0>
>> rman_reserve_resource_bound: tried 0x1 <0x51,0>
>> rman_reserve_resource_bound: tried 0x2 <0x51,0>
>> rman_reserve_resource_bound: tried 0x3 <0x51,0>
>> rman_reserve_resource_bound: tried 0x4 <0x51,0>
>> rman_reserve_resource_bound: tried 0x5 <0x51,0>
>> rman_reserve_resource_bound: tried 0x6 <0x51,0>
>> rman_reserve_resource_bound: tried 0x7 <0x51,0>
>> rman_reserve_resource_bound: tried 0xc <0x51,0>
>> rman_reserve_resource_bound: tried 0xd <0x51,0>
>> rman_reserve_resource_bound: tried 0xe <0x51,0>
>> rman_reserve_resource_bound: tried 0xf <0x51,0>
>> rman_reserve_resource_bound: tried 0x10 <0x51,0>
>> rman_reserve_resource_bound: tried 0x11 <0x51,0>
>> rman_reserve_resource_bound: tried 0x12 <0x51,0>
>> rman_reserve_resource_bound: tried 0x17 <0x51,0>
>> rman_reserve_resource_bound: tried 0x18 <0x51,0>
>> rman_reserve_resource_bound: tried 0x1a <0x51,0>
>> rman_reserve_resource_bound: tried 0x1b <0x51,0>
>> rman_reserve_resource_bound: tried 0x22 <0x51,0>
>> rman_reserve_resource_bound: tried 0x23 <0x51,0>
>> rman_reserve_resource_bound: tried 0x24 <0x51,0>
>> rman_reserve_resource_bound: tried 0x25 <0x51,0>
>> rman_reserve_resource_bound: tried 0x26 <0x51,0>
>> rman_reserve_resource_bound: tried 0x27 <0x51,0>
>> rman_reserve_resource_bound: tried 0x28 <0x51,0>
>> rman_reserve_resource_bound: tried 0x29 <0x51,0>
>> rman_reserve_resource_bound: tried 0x4e <0x51,0>
>> rman_reserve_resource_bound: tried 0x4f <0x51,0>
>> considering [0x50, 0xffffffffffffffff]
>> truncated region: [0x51, 0x51]; size 0x1 (requested 0x1)
>> candidate region: [0x51, 0x51], size 0x1
>> splitting region in three parts: [0x50, 0x50]; [0x51, 0x51]; [0x52,
>> 0xffffffffffffffff]
>> pci0: <OFW PCI bus> on pcib0
>> rman_manage_region: <PCI domain 0 bus numbers> request: start 0, end 0xff
>> rman_reserve_resource_bound: <PCI domain 0 bus numbers> request: [0, 0],
>> length 0x1, flags 0, device pci0
>> rman_reserve_resource_bound: trying 0xff <0,0>
>> considering [0, 0xff]
>> truncated region: [0, 0]; size 0x1 (requested 0x1)
>> candidate region: [0, 0], size 0x1
>> allocating from the beginning
>> pci0: domain=0, physical bus=0
>> found-> vendor=0x14e4, dev=0x2711, revid=0x00
>> domain=0, bus=0, slot=0, func=0
>> class=06-04-00, hdrtype=0x01, mfdev=0
>> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> intpin=a, irq=0
>> powerspec 3 supports D0 D3 current D0
>> secbus=1, subbus=1
>> rman_reserve_resource_bound: <PCI domain 0 bus numbers> request: [0x1, 0x1],
>> length 0x1, flags 0, device (null)
>> rman_reserve_resource_bound: trying 0 <0x1,0>
>> rman_reserve_resource_bound: tried 0 <0x1,0>
>> considering [0x1, 0xff]
>> truncated region: [0x1, 0x1]; size 0x1 (requested 0x1)
>> candidate region: [0x1, 0x1], size 0x1
>> allocating from the beginning
>> pcib1: <PCI-PCI bridge> irq 91 at device 0.0 on pci0
Looking at an old log shows that the next normal output was:
pcib0: rman_reserve_resource: start=0xc0000000, end=0xc00fffff, count=0x100000
and somewhat later there was:
pcib1: allocated memory range (0xc0000000-0xc0000fff) for rid 10 of bcm_xhci0
I'll give more text at the end of this message. Basically the
sequence is assocaited with xhci0. The count=0x100000 looks
to be from the reg for xhci@7e9c0000.
scb {
compatible = "simple-bus";
#address-cells = <0x00000002>;
#size-cells = <0x00000002>;
ranges = <0x00000000 0x7c000000 0x00000000 0xfc000000
0x00000000 0x03800000 0x00000000 0x40000000 0x00000000 0xff800000 0x00000000
0x00800000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000000 0x40000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0xfc000000>;
dma-ranges = <0x00000000 0x00000000 0x00000000 0x00000000
0x00000004 0x00000000>;
phandle = <0x000000d6>;
pcie@7d500000 {
compatible = "brcm,bcm2711-pcie", "brcm,bcm7445-pcie";
reg = <0x00000000 0x7d500000 0x00000000 0x00009310>;
device_type = "pci";
#address-cells = <0x00000003>;
#interrupt-cells = <0x00000001>;
#size-cells = <0x00000002>;
interrupts = <0x00000000 0x00000094 0x00000004
0x00000000 0x00000094 0x00000004>;
interrupt-names = "pcie", "msi";
interrupt-map-mask = <0x00000000 0x00000000 0x00000000
0x00000007>;
interrupt-map = <0x00000000 0x00000000 0x00000000
0x00000001 0x00000001 0x00000000 0x0000008f 0x00000004>;
msi-controller;
msi-parent = <0x0000002c>;
ranges = <0x02000000 0x00000000 0xc0000000 0x00000006
0x00000000 0x00000000 0x40000000>;
dma-ranges = <0x02000000 0x00000004 0x00000000
0x00000000 0x00000000 0x00000002 0x00000000>;
brcm,enable-ssc;
phandle = <0x0000002c>;
pci@1,0 {
#address-cells = <0x00000003>;
#size-cells = <0x00000002>;
ranges;
reg = <0x00000000 0x00000000 0x00000000
0x00000000 0x00000000>;
usb@1,0 {
reg = <0x00010000 0x00000000 0x00000000
0x00000000 0x00000000>;
resets = <0x0000002d 0x00000000>;
};
};
};
. .
xhci@7e9c0000 {
compatible = "generic-xhci";
status = "disabled";
reg = <0x00000000 0x7e9c0000 0x00000000 0x00100000>;
interrupts = <0x00000000 0x000000b0 0x00000004>;
power-domains = <0x00000013 0x00000006>;
phandle = <0x000000d9>;
};
Note the lack of nesting of xhci@7e9c0000 relative to
pcie@7d50000 .
>> rman_manage_region: <pcib1 bus numbers> request: start 0x1, end 0x1
>> pcib0: rman_reserve_resource: start=0xc0000000, end=0xc00fffff,
>> count=0x100000
>> rman_reserve_resource_bound: <PCIe Memory> request: [0xc0000000,
>> 0xc00fffff], length 0x100000, flags 102, device pcib1
>> rman_reserve_resource_bound: trying 0xffffffff <0xc0000000,0xfffff>
>> considering [0xc0000000, 0xffffffff]
>> truncated region: [0xc0000000, 0xc00fffff]; size 0x100000 (requested
>> 0x100000)
>> candidate region: [0xc0000000, 0xc00fffff], size 0x100000
>> allocating from the beginning
>> rman_manage_region: <pcib1 memory window> request: start 0x600000000, end
>> 0x6000fffff
>> panic: Failed to add resource to rman
>> cpuid = 0
>> time = 1
>> KDB: stack backtrace:
>> db_trace_self() at db_trace_self
>> db_trace_self_wrapper() at db_trace_self_wrapper+0x38
>> vpanic() at vpanic+0x1a4
>> panic() at panic+0x48
>> pcib_add_window_resources() at pcib_add_window_resources+0xf4
>> pcib_alloc_window() at pcib_alloc_window+0xfc
>> pcib_attach_common() at pcib_attach_common+0xa18
>> pcib_attach() at pcib_attach+0x14
>> device_attach() at device_attach+0x3fc
>> device_probe_and_attach() at device_probe_and_attach+0x80
>> bus_generic_attach() at bus_generic_attach+0x1c
>> pci_attach() at pci_attach+0xec
>> device_attach() at device_attach+0x3fc
>> device_probe_and_attach() at device_probe_and_attach+0x80
>> bus_generic_attach() at bus_generic_attach+0x1c
>> device_attach() at device_attach+0x3fc
>> device_probe_and_attach() at device_probe_and_attach+0x80
>> bus_generic_new_pass() at bus_generic_new_pass+0x100
>> bus_generic_new_pass() at bus_generic_new_pass+0xb0
>> bus_generic_new_pass() at bus_generic_new_pass+0xb0
>> bus_generic_new_pass() at bus_generic_new_pass+0xb0
>> bus_set_pass() at bus_set_pass+0x50
>> mi_startup() at mi_startup+0x1e0
>> virtdone() at virtdone+0x68
>> KDB: enter: panic
>> [ thread pid 0 tid 100000 ]
>> Stopped at kdb_enter+0x4c: str xzr, [x19, #1280]
>> db>
>
>
For reference from an old log:
pcib1: <PCI-PCI bridge> irq 91 at device 0.0 on pci0
pcib0: rman_reserve_resource: start=0xc0000000, end=0xc00fffff, count=0x100000
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: memory decode 0xc0000000-0xc00fffff
pci1: <OFW PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
found-> vendor=0x1106, dev=0x3483, revid=0x01
domain=0, bus=1, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
powerspec 3 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type Memory, range 64, base 0, size 12, memory disabled
pcib1: slot 0 INTA is routed to irq 92
bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 92 at device
0.0 on pci1
bcm_xhci0: note: xhci firmware not found.
bcm_xhci0: note: installing xhci firmware.
bcm_xhci0: note: xhci firmware detected; firmware is revision 138a1.
pcib1: allocated memory range (0xc0000000-0xc0000fff) for rid 10 of bcm_xhci0
bcm_xhci0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xc0000000
bcm_xhci0: 32 bytes context size, 64-bit DMA
bcm_xhci0: attempting to allocate 1 MSI vectors (4 supported)
bcm_xhci0: using IRQ 93 for MSI
bcm_xhci0: MSI enabled
bcm_xhci0: (New XHCI DeviceId=0x34831106)
usbus0 on bcm_xhci0
bcm_xhci0: usbpf: Attached
===
Mark Millard
marklmi at yahoo.com
