On 9/16/22 08:20, Hans Petter Selasky wrote:
On 9/15/22 17:36, Ivan Quitschal wrote:
On Thu, 15 Sep 2022, Ivan Quitschal wrote:
On Thu, 15 Sep 2022, Hans Petter Selasky wrote:
On 9/15/22 17:18, Hans Petter Selasky wrote:
On 9/15/22 17:16, Ivan Quitschal wrote:
Hi All
Does anybody have any idea what could be happening here?.
I have a laptop DELL INSPIRON 3511 and everything works just fine,
literally everything. even the iwlwifi0.
But in order to use my full 600mbps, i dont use the wireless but a
TP-LINK USB ethernet connected on "ue0"
ugen0.6: <TP-Link USB 10/100/1000 LAN> at usbus0, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=ON (200mA)
but something really strange is happening .. everytime i open the
chromium e do a speedtest (could be speedtest.net or any other) ,
at the end of the test the eth interface dies .. it changes from
full-duplex to half-duplex/no carrier and the only way to get the
internet back thru ue0 is by rebooting the whole thing.
not even a "service netif restart" does anything
if anyone has any ideas why is that , would be appreciated
Hi,
I think it some new features they use in the USB data protocol
which we don't support. Check the Linux code.
Between does:
usbconfig -d 0.6 reset
recover the device?
--HPS
Hi,
Search for axge on bugzilla:
I suspect you are using this chipset:
Try:
usbconfig show_ifdrv
To know for sure.
Also see:
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugs.freebsd.org%2Fbugzilla%2Fshow_bug.cgi%3Fid%3D210488&data=05%7C01%7C%7Ce7f888b3635f4e898ca308da972fa69b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637988528164303655%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zvw7m8lJ%2FHocK%2FXJIDfdPv%2FArCpE5pk9lYz%2BY8WzMCc%3D&reserved=0
--HPS
Hi Hans,
actually the driver i use is not agxe (i thought it would be by the
time i
bought the usbcard)
this is the module im using
if_ure.ko
and thank you , yes, reseting the usb entry with your command worked
just fine.
i got the internet back after doing this
usbconfig -d 0.6 reset
do we have a bug here then?
thank you
--tzk
oh, i forgot to mention that the ure driver freezes not during the
download test but in the middle of the upload, always
dont know if that helps
thanks
--tzk
Hi Ivan,
Yes, there seems to be problem there. I need to look at the driver.
Maybe it is simply sending too much data, than the device can handle!
--HPS
Hi,
Try lowering this constant to 8192:
sys/dev/usb/net/if_urereg.h:#define URE_TX_BUFSZ 16384
Then recompile and install if_ure:
make -C sys/modules/usb/ure KMODDIR=/boot/kernel all install
--HPS
