On 2/27/22 16:09, Larry Rosenman wrote:
On 02/27/2022 3:03 pm, Michael Butler wrote:
[ cc list trimmed ]
On 2/27/22 14:16, Larry Rosenman wrote:
I was able to export the rest of the datasets, and re-install
14-CURRENT from a recent snapshot, and restore the datasets I care
about.
I'm now seeing:
mfi0: IOCTL 0x40086481 not handled
mfi0: IOCTL 0x40086481 not handled
mfi0: IOCTL 0x40086481 not handled
mfi0: IOCTL 0x40086481 not handled
pid 48 (zpool), jid 0, uid 0: exited on signal 6
mfi0: IOCTL 0x40086481 not handled
mfi0: IOCTL 0x40086481 not handled
mfi0: IOCTL 0x40086481 not handled
mfi0: IOCTL 0x40086481 not handled
pid 54 (zpool), jid 0, uid 0: exited on signal 6
On boot. Ideas?
These messages may or may not be related. I found both the mfi and
mrsas drivers to be 'chatty' in this way - IOCTL complaints. I ended
up setting the debug flag for mrsas in /etc/sysctl.conf ..
dev.mrsas.0.mrsas_debug=0
There's an equivalent for mfi
Michael
I don't see it:
✖1 ❯ sysctl dev.mfi
dev.mfi.0.keep_deleted_volumes: 0
dev.mfi.0.delete_busy_volumes: 0
dev.mfi.0.%parent: pci3
dev.mfi.0.%pnpinfo: vendor=0x1000 device=0x0079 subvendor=0x1028
subdevice=0x1f17 class=0x010400
dev.mfi.0.%location: slot=0 function=0 dbsf=pci0:3:0:0
dev.mfi.0.%driver: mfi
dev.mfi.0.%desc: Dell PERC H700 Integrated
dev.mfi.%parent:
<sigh> my brain-fade - you're right; it is only there and tunable in the
mrsas driver.
My apologies :-(
Michael
