Matt, This is on a recently installed 12.2-RELEASE system.
PCIID? I’m not sure how to get that information. Will the bootup info help? Here’s a picture. I tried plugging into several different Cisco switches and a Juniper switch as well - all with no effect. I tried running tcpdump -i igb0 and was waiting to see broadcast traffic. From the switch side I could see the traffic counters increasing as traffic was sent out of the port. I went out and bought an intel PCIe NIC card - it turns out to use the em driver, which has been merged with the igb driver (I think). Same results... Thanks, Joe Joe McGuckin ViaNet Communications j...@via.net 650-207-0372 cell 650-213-1302 office 650-969-2124 fax > On Feb 3, 2021, at 7:37 PM, Matthew Macy <mm...@freebsd.org> wrote: > > What is the PCIID for the MAC? > > On Wed, Feb 3, 2021 at 14:35 joe mcguckin <j...@via.net > <mailto:j...@via.net>> wrote: > I recently installed 12.2 on a supermicro motherboard. > > Connected to a 100M port on a Cisco switch, everything works ok > Connecting to a 1000BTX port, ifconfig says “Active, 1000B full duplex” but > no traffic passes. > > Are there known problems with the igb driver? > > Thanks, > > Joe > > > Joe McGuckin > ViaNet Communications > > j...@via.net <mailto:j...@via.net> > 650-207-0372 cell > 650-213-1302 office > 650-969-2124 fax > > > > _______________________________________________ > freebsd-current@freebsd.org <mailto:freebsd-current@freebsd.org> mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-current > <https://lists.freebsd.org/mailman/listinfo/freebsd-current> > To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org > <mailto:freebsd-current-unsubscr...@freebsd.org>" _______________________________________________ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"