Hi!
> > Trying to get a 8-port serial PCIe card into operation (Exsys EX-44388).
> > After reboot, dmesg shows:
> >
> > uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
[...]
> uart is the new thing. sio info should be ignored.
>
> Chances are good that this device doesn't have the proper entries in the
> puc driver. Do you have any pci devices that show up as unclaimed?
One, but it does not look like a match ?
none0@pci0:0:31:3: class=0x0c0500 card=0x062415d9 chip=0x1c228086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family SMBus Controller'
class = serial bus
subclass = SMBus
bar [10] = type Memory, range 64, base 0xdfa21000, size 256, enabled
bar [20] = type I/O Port, range 32, base 0x580, size 32, enabled
It's a PCIe card, not PCI, does that matter ?
--
[email protected] +49 171 3101372 One year to go !
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[email protected]"
