On Thu, Oct 25, 2018 at 10:16 AM Rebecca Cran <rebe...@bluestop.org> wrote:
> On 10/25/18 10:00 AM, Warner Losh wrote: > > > > > I suspect you can just lose those hints in the hints file and be fine. > The > > uart should attach via acpi. The keyboard won't, however, since it isn't > > enabled. Can you try removing these lines from your hints file and see if > > the problem persists? Note this is for debugging purposes only. > > > > hint.atkbdc.0.at="isa" > > hint.uart.0.at="isa" > > > That seems to work. After also removing uart1 from the hints file, I get: > > > uart0: <16x50 with 256 byte FIFO> iomem > 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 > uart1: <16x50 with 256 byte FIFO> iomem > 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 > uart2: <16x50 with 256 byte FIFO> iomem > 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 > uart3: <16x50 with 256 byte FIFO> iomem > 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 > That seems incorrect. It looks like we're attaching too much. what does devinfo -v | grep uart tell you? Warner _______________________________________________ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
