On 02/18/18 02:23, Hans Petter Selasky wrote: > On 02/18/18 05:14, Ian FREISLICH wrote: >> On 02/17/18 22:48, Warner Losh wrote: >>> On Feb 17, 2018 8:24 PM, "Ian FREISLICH" >>> <ian.freisl...@capeaugusta.com <mailto:ian.freisl...@capeaugusta.com>> >>> wrote: >>> >>> Hi >>> >>> Since devmatch some of my USB devices no longer get their drivers >>> loaded. It's not clear from UPDATING whether I needed to do >>> anything >>> beyond building and installing kernel and world as well as >>> updating >>> /etc. There was reference to removing /etc/devd/usb.conf in >>> another >>> thread but its presence or lack thereof makes no difference. >>> >>> >>> I assume you've fully updated including /etc. >> >> In as much as 'mergemaster -Ui' fully updates /etc >> >>> If you can uncomment the devd lines in syslog.conf, touch >>> /var/log/devd.log and reboot. Once you are up again, please send me >>> /var/log/devd.conf. >> >> Assuming you mean these lines: >> >> !devd >> *.>=notice /var/log/devd.log >> >> devd produced zero logs on reboot and restart. > > Can you run: > > usbconfig show_ifdrv > > Maybe the wrong driver captured your device?
ugen0.1: <0x8086 XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen0.1.0: uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> ugen0.2: <AzureWave USB2.0 VGA UVC WebCam> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) ugen0.3: <vendor 0x8087 product 0x0a2b> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) ugen0.3.0: ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.10, addr 2> ugen0.4: <ELAN ELANFingerprint> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) ugen0.5: <RAPOO RAPOO 2.4G Wireless Device> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) ugen0.6: <CMI USB 101001000 LAN> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (72mA) After loading ums and ukbd: ugen0.5: <RAPOO RAPOO 2.4G Wireless Device> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) ugen0.5.0: ukbd0: <RAPOO RAPOO 2.4G Wireless Device, class 0/0, rev 1.10/10.01, addr 5> ugen0.5.1: ums0: <RAPOO RAPOO 2.4G Wireless Device, class 0/0, rev 1.10/10.01, addr 5> > Try running: > > usbconfig -d X.Y reset This produces no kernel messages, no difference to drivers. --
ugen0.1: <0x8086 XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0300 bDeviceClass = 0x0009 <HUB> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0003 bMaxPacketSize0 = 0x0009 idVendor = 0x0000 idProduct = 0x0000 bcdDevice = 0x0100 iManufacturer = 0x0001 <0x8086> iProduct = 0x0002 <XHCI root HUB> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 ugen0.2: <AzureWave USB2.0 VGA UVC WebCam> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x00ef <Miscellaneous device> bDeviceSubClass = 0x0002 bDeviceProtocol = 0x0001 bMaxPacketSize0 = 0x0040 idVendor = 0x13d3 idProduct = 0x5755 bcdDevice = 0x1612 iManufacturer = 0x0003 <AzureWave> iProduct = 0x0001 <USB2.0 VGA UVC WebCam> iSerialNumber = 0x0002 <0001> bNumConfigurations = 0x0001 ugen0.3: <vendor 0x8087 product 0x0a2b> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x00e0 <Wireless controller> bDeviceSubClass = 0x0001 bDeviceProtocol = 0x0001 bMaxPacketSize0 = 0x0040 idVendor = 0x8087 idProduct = 0x0a2b bcdDevice = 0x0010 iManufacturer = 0x0000 <no string> iProduct = 0x0000 <no string> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 ugen0.4: <ELAN ELANFingerprint> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x04f3 idProduct = 0x0903 bcdDevice = 0x0135 iManufacturer = 0x0001 <ELAN> iProduct = 0x0002 <ELAN:Fingerprint> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 ugen0.5: <RAPOO RAPOO 2.4G Wireless Device> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x24ae idProduct = 0x2000 bcdDevice = 0x1001 iManufacturer = 0x0001 <RAPOO> iProduct = 0x0002 <RAPOO 2.4G Wireless Device> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 ugen0.6: <CMI USB 101001000 LAN> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (72mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0300 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0009 idVendor = 0x0bda idProduct = 0x8153 bcdDevice = 0x3000 iManufacturer = 0x0001 <CMI> iProduct = 0x0002 <USB 10/100/1000 LAN> iSerialNumber = 0x0006 <000001> bNumConfigurations = 0x0002
_______________________________________________ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
