> > > HI! I've recently got a SSD device. Yes, not a disk, but a device. > > > It's called, i. e. one of the first REVODRIVEs. > > > It's a PCI-express card with two embedded ssd disks about ~ 55GB size. > > > And it's a raid card. Fake software raid. You can set it up as a > > > RAID0, RAID1, etc and a CONCATENATION. No way to leave it unconfigured > > > or set it as JBOD or something else. > > > You just won't be able to boot from this device in that case.
I used to have one of these in my workstation (mine was recognized as 4 SATA drives of about 60GB). I had put these into a zfs pool with raidz1 and was able to boot from the card without any issue. BIOS reported them as 4 individual drives. These are pre-NVME, so no NVME driver was necessary. Unfortunately, the card recently died of old age, so I can't provide any more than historic references. The type was OCZSSDPX-1RVDX0240 . Cheers, Markus _______________________________________________ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
