> On Feb 28, 2015, at 6:42 PM, Dan Langille <[email protected]> wrote: > >> On Feb 28, 2015, at 6:15 PM, Kenneth D. Merry <[email protected]> wrote: >> >>> On Sat, Feb 28, 2015 at 17:29:48 -0500, Dan Langille wrote: >>> >>>> On Feb 18, 2015, at 7:13 PM, Kenneth D. Merry <[email protected]> wrote: >>>> >>>> >>>> I have updated the patches. >>>> >>>> I have removed the XPT_DEV_ADVINFO changes from the patches to head, since >>>> I committed those separately. >>>> >>>> I have (hopefully) fixed the build for the stable/10 patches by MFCing >>>> dependencies. (One of them mav did for me, thanks!) >>>> >>>> Rough draft commit message: >>>> >>>> http://people.freebsd.org/~ken/sa_changes_commitmsg.20150218.1.txt >>> >>> >>> I have current installed and running with Bacula, but I have not tried the >>> tape drive yet. >> >> Thanks for all your work on this! >> >>> It seems like your changes are in there from about 5 days ago. >> >> Yes, that is correct. >> >>> Having solved my server hardware issues, I'm now having issues with the >>> autochanger mechanism >>> of the tape library. >> >> Does it work with chio(1)? >> >> Does it look like hardware or software? (If it is software, I can help >> with that.) >> >> > > Hardware. The screw drive for the tape robot is sticky. It can be moved by > hand, but the motor in this DL 891 cannot. It might need lube. It was suspect > last time I used it. Worst case, I will remove ins of the two DLT 8000 tape > drives and load tapes manually.
A bit of lube, and we have POST: https://twitter.com/DLangille/status/572117570997919744 More, soon. — Dan Langille http://langille.org/ _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[email protected]"
