Hi, I am trying to install FreeBSD on MacBookPro Late 2013, I got 3 main problems:
1. USB problem This MacBookPro model only have xhci controller, 10.0-RC3 and 9.2R not working, keyboard and touchpad not respond. Error messages are "xhci_do_command: Command timeout!" and "USB_ERR_TIMEOUT". I also try to set "hw.usb.xhci.msi=0", no lucky. But 9.1R is OK, I copy xhci*.* file from 9.1R to 10.0, with very small change, and xhci works under 10.0-RC3! dmesg in 10.0-RC3: http://sw.gddsn.org.cn/freebsd/dmesg-10.0.txt vmstat -i in 10.0-RC3: http://sw.gddsn.org.cn/freebsd/vmstat-10.0.txt pciconf in 10.0-RC3: http://sw.gddsn.org.cn/freebsd/pciconf.txt dmesg in 10.0 + xhci of 9.1R: http://sw.gddsn.org.cn/freebsd/dmesg-10.0+9.1.txt vmstat -i in + xhci of 9.1R: http://sw.gddsn.org.cn/freebsd/vmstat-10.0+9.1.txt 2. AHCI timeout problem After booting, system quickly hit ahci timeout problem, I have to set "camcontrol tags ada0 -N 1". this can decrease timeout problem, but still happen when running heavy IO. "hint.ahci.0.msi=0" seem to fix this problem, but ahci and xhci use same IRQ 16, this make 10.0+9.1xhci unstable:( Internal keyboard and touchpad not working, external keyboard and mouse working. vmstat -i in 10.0+9.1xhci with "hint.ahci.0.msi=0": http://sw.gddsn.org.cn/freebsd/vmstat-10.0+9.1+msi.txt camcontrol identify: http://sw.gddsn.org.cn/freebsd/cam-identify.txt smartctl: http://sw.gddsn.org.cn/freebsd/smartctl.txt 3. Random hang Sometimes the system(10.0+9.1xhci) hang without any message, keyboard, mouse and ping ping not respond. console no message, ctrl+alt+esc also could not break into ddb, I may try firewire/dcons, help it can get some useful information. I really like to have a working freebsd on MacBookPro, anything I can provide or any ideas? Cheers, Huang Wen Hui _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
