On Sat, Sep 14, 2013 at 08:47:06PM -0600, Scott Long wrote:
> Index: sys/dev/re/if_re.c
> ===================================================================
> --- sys/dev/re/if_re.c (revision 255582)
> +++ sys/dev/re/if_re.c (working copy)
> @@ -234,6 +234,10 @@
> { RL_HWREV_8168E_VL, RL_8169, "8168E/8111E-VL", RL_JUMBO_MTU_6K},
> { RL_HWREV_8168F, RL_8169, "8168F/8111F", RL_JUMBO_MTU_9K},
> { RL_HWREV_8411, RL_8169, "8411", RL_JUMBO_MTU_9K},
> + { RL_HWREV_8168_0, RL_8169, "8168G/8111G", RL_JUMBO_MTU_9K},
> + { RL_HWREV_8168_1, RL_8169, "8168G/8111G", RL_JUMBO_MTU_9K},
> + { RL_HWREV_8168_2, RL_8169, "8168G/8111G", RL_JUMBO_MTU_9K},
> + { RL_HWREV_8168_4, RL_8169, "8411", RL_JUMBO_MTU_9K},
> { 0, 0, NULL, 0 }
> };
>
> @@ -1457,6 +1461,10 @@
> case RL_HWREV_8168E_VL:
> case RL_HWREV_8168F:
> case RL_HWREV_8411:
> + case RL_HWREV_8168G_0:
> + case RL_HWREV_8168G_1:
> + case RL_HWREV_8168G_2:
> + case RL_HWREV_8168G_4:
> sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR |
> RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_CMDSTOP |
> RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 |
> Index: sys/pci/if_rlreg.h
> ===================================================================
> --- sys/pci/if_rlreg.h (revision 255582)
> +++ sys/pci/if_rlreg.h (working copy)
> @@ -191,6 +191,10 @@
> #define RL_HWREV_8402 0x44000000
> #define RL_HWREV_8168F 0x48000000
> #define RL_HWREV_8411 0x48800000
> +#define RL_HWREV_8168G_0 0x4c000000
> +#define RL_HWREV_8168G_1 0x4c100000
I don't know exact model number for these MACs but it may be 8168G.
> +#define RL_HWREV_8168G_2 0x50900000
This looks like 8168GU.
> +#define RL_HWREV_8168G_4 0x5c800000
This looks like 8411B.
RL_TXCFG_HWREV is 0x7CC00000 so driver will not see
RL_HWREV_8168G_1(0x4c100000) and RL_HWREV_8168G_2(0x50900000).
It seems newer RealTek controllers seem to use ODP to access PHY.
In addition, these controllers may need to set RX DMA parameter
(bit 11 of RL_RXCFG). I'm not sure what this bit does though.
Scott, did you test your patch on real H/W? If it works I'm fine
with your patch. Just remove RL_HWREV_8168G_1 and RL_HWREV_8168G_2
as current driver has no way to get these revisions.
> #define RL_HWREV_8139 0x60000000
> #define RL_HWREV_8139A 0x70000000
> #define RL_HWREV_8139AG 0x70800000
>
> On Sep 14, 2013, at 3:41 PM, Thomas Guldener <tgulde...@bluewin.ch> wrote:
>
> > FreeBSD 10 Alpha Release is Booting on the Shuttle DS47 - But still no
> > support for the Realtek RT 8111G Network Cards.
> >
> > g.
> > Thomas
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
