In addition to what I wrote already for sparc64,
I now get this failure on amd64 r249781:
(EE) Jun 14 18:17:27 NVIDIA(0): Failed to initialize default colormap
(EE) NVIDIA(0): *** Aborting ***
Maybe my "portmaster -r perl" didn't go well?
Or do I need to rebuild some other ports?
Thanks
Anton
From mexas Thu Jun 13 11:14:30 2013
To: freebsd-spar...@freebsd.org, freebsd-...@freebsd.org
Subject: sparc64 machfb: (EE) Unable to map mmio aperture. Invalid
argument (22)
Reply-To: me...@bristol.ac.uk
I've just updated my Sun Blade 1500 silver
to 10.0-CURRENT #11 r251648. The graphics broke.
I get:
(EE) Unable to map mmio aperture. Invalid argument (22)
from X -configure
# dmesg|grep mach
machfb0: <ATI Rage XL> port 0xb00-0xbff mem
0x3000000-0x3ffffff,0x102000-0x102ff
f at device 2.0 on pci0
machfb0: console
machfb0: 16 MB aperture at 0xfddcc000 not swapped
machfb0: 8188 KB SGRAM 114.992 MHz, maximum RAMDAC clock 230 MHz, DSP
machfb0: resolution 1280x1024 at 8 bpp
#
# pkg info -xo mach6
xf86-video-mach64-6.9.3: x11-drivers/xf86-video-mach64
#
# cat /var/log/Xorg.0.log
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 10.0-CURRENT sparc64
Current Operating System: FreeBSD mech-anton240.men.bris.ac.uk
10.0-CURRENT Free
BSD 10.0-CURRENT #11 r251648: Thu Jun 13 10:20:15 BST 2013
root@mech-anton24
0.men.bris.ac.uk:/usr/obj/usr/src/sys/QOF sparc64
Build Date: 03 June 2013 03:14:51PM
Current version of pixman: 0.28.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 13 11:07:01 2013
(II) Loader magic: 0x3c5768
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) Using syscons driver with X support (version 8589945424.11)
(--) using VT number 11
(--) PCI: (0:0:6:0) 10b9:7101:0000:0000 ULi Electronics Inc. M7101
Power Managem
ent Controller [PMU] rev 0
(--) PCI: (0:0:2:0) 1002:4752:0000:0000 Advanced Micro Devices, Inc.
[AMD/ATI] R
age XL PCI rev 39, Mem @ 0x03000000/16777216, 0x00102000/4096, I/O @
0x00000b00/
256, BIOS @ 0x????????/65536
List of video drivers:
mach64
(II) LoadModule: "mach64"
(II) Loading /usr/local/lib/xorg/modules/drivers/mach64_drv.so
(II) Module mach64: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.9.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) MACH64: Driver for ATI Mach64 chipsets
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(**) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(EE) Unable to map mmio aperture. Invalid argument (22)
(WW) MACH64: Mach64 in slot 0:2:0 could not be detected!
Xorg detected your mouse at device /dev/sysmouse.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.
Your xorg.conf file is /root/xorg.conf.new
To test the server, run 'X -config /root/xorg.conf.new'
Maybe I need to rebuild some ports?
Please advise
Thanks
Anton
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
