On 04/21/13 21:38, Sergey V. Dyatko wrote:
Hi,
Can anybody explain why USB keyboard (and keyboard from
integrated IPKVM) doesn't work when I boot with 'C606
chipset Dual 4-Port SATA/SAS Storage Control Unit' enabled in bios?
Also I can't boot that box from usb memstick and
FreeBSD-10.0-CURRENT-amd64-20130413-r249439-release.iso They both
loose(?) device and can't find root If I disable controller in bios
system can't see any sata hdd connected to it:(
booting with hw.usb.ehci.no_hs=1, kern.cam.boot_delay="10000"
and debug.acpi.disabled="hostres" without success. I setup dhcpd, tftp,
nfs on my laptop and finally I install fbsd on that box, but question
with kbd is open - It doesn't work..
dmesg:
http://svn.freebsd.by/files/dmesg_N3RF.txt
pciconf -lv:
http://svn.freebsd.by/files/pciconf_N3RF.txt
I would appreciate any hints
Hi,
This indicates a LOW memory problem, or unability to grab contiguous
memory for USB controller drivers:
usbd_ctrl_transfer_setup: could not setup default USB transfer
usbd_ctrl_transfer_setup: could not setup default USB transfer
usb_alloc_device: set address 2 failed (USB_ERR_NOMEM, ignored)
usbd_ctrl_transfer_setup: could not setup default USB transfer
usb_alloc_device: set address 2 failed (USB_ERR_NOMEM, ignored)
usbd_ctrl_transfer_setup: could not setup default USB transfer
usbd_ctrl_transfer_setup: could not setup default USB transfer
usbd_ctrl_transfer_setup: could not setup default USB transfer
That's why USB doesn't work. Try to figure out who is using all that memory.
--HPS
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
