On Thu, Mar 21, 2013 at 10:04:41AM +0200, Konstantin Belousov wrote: > ... > This gives me an idea. The only so to say 'vm' change in r248508 was an > addition of the bio_transient_map submap. The vfs.unmapped_buf_allowed > tunable did not eliminated the submap creation. Please try r248569 > with vfs.unmapped_buf_allowed set to 0.
OK; I believe that worked. "Believe" because (in the normal course of things) I updated to: FreeBSD g1-235.catwhisker.org 10.0-CURRENT FreeBSD 10.0-CURRENT #845 r248575M/248575: Thu Mar 21 05:35:06 PDT 2013 r...@g1-235.catwhisker.org:/usr/obj/usr/src/sys/CANARY i386 which is a little beyond r248569. (I still have r248508 on a different slice, and figured I could update that to precisely r248569 if this test was incorrect or inconclusive.) In any case: after booting the above (r248575) to verify that it worked as long as I did not load nvidia.ko first, I then rebooted, escaped to loader prompt, set vfs.unmapped_buf_allowed=0; boot. And after that came up OK, I (manually) loaded nvidia.ko, then re-started X (xdm); the nVidia banner displayed just before the xdm login screen did. (I have my xdm startup script "prefer" the nvidia driver, but if nvidia.ko isn't loaded, it reverts to the nv driver automagically.) > If this combination allows the nvidia driver to start, please revert > the setting of vfs.unmapped_buf_allowed, and instead set > kern.bio_transient_maxcnt e.g. to 256 or even 128. OK; rebooting, escaping to loader, *not* setting vfs.unmapped_buf_allowed, and setting kern.bio_transient_maxcnt=256 also allowed nvidia driver to be used at r248575. > Also, on the machine without the tunables customization, please show > the output of sysctl kern.nbuf, kern.bio_transient_maxcnt. Also show > the output of pciconf -lvb. OK; I rebooted (to revert the vfs.unmapped_buf_allowed setting) and obtained the above (augmented a wee bit by some of the others mentioned; I've attached that as "sysctl.txt". I've also attached a copy of dmesg.boot, in case that's useful. I then tried rebooting r248575 and loading nvidia.ko *without* the tunable customization, and verified that I still saw (what looks like) a "reset" when I start X that way (as reported initially). > From what I see in your report, you use i386 arch. What is the amount > of memory installed in the machine ? 4GB. Is the above what you had in mind, or would you like me to try at precisely r248569? Anything else? Thanks again! Peace, david -- David H. Wolfskill da...@catwhisker.org Taliban: Evil men with guns afraid of truth from a 14-year old girl. See http://www.catwhisker.org/~david/publickey.gpg for my public key.
Script started on Thu Mar 21 06:07:41 2013
g1-235(10.0-C)[1] uname -a
FreeBSD g1-235.catwhisker.org 10.0-CURRENT FreeBSD 10.0-CURRENT #845
r248575M/248575: Thu Mar 21 05:35:06 PDT 2013
r...@g1-235.catwhisker.org:/usr/obj/usr/src/sys/CANARY i386
g1-235(10.0-C)[2] sysctl vfs.unmapped_buf_allowed kern.bio_transient_maxcnt
kern.nbuf
vfs.unmapped_buf_allowed: 1
kern.bio_transient_maxcnt: 697
kern.nbuf: 7224
g1-235(10.0-C)[3] pciconf -lvb
hostb0@pci0:0:0:0: class=0x060000 card=0x02501028 chip=0x2a408086 rev=0x07
hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 4 Series Chipset Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x02501028 chip=0x2a418086 rev=0x07
hdr=0x01
vendor = 'Intel Corporation'
device = 'Mobile 4 Series Chipset PCI Express Graphics Port'
class = bridge
subclass = PCI-PCI
none0@pci0:0:3:0: class=0x078000 card=0x02501028 chip=0x2a448086 rev=0x07
hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 4 Series Chipset MEI Controller'
class = simple comms
bar [10] = type Memory, range 64, base 0xf6fd9ef0, size 16, enabled
atapci0@pci0:0:3:2: class=0x010185 card=0x02501028 chip=0x2a468086 rev=0x07
hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 4 Series Chipset PT IDER Controller'
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0xef78, size 8, enabled
bar [14] = type I/O Port, range 32, base 0xef70, size 4, enabled
bar [18] = type I/O Port, range 32, base 0xef80, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0xef74, size 4, enabled
bar [20] = type I/O Port, range 32, base 0xef90, size 16, enabled
none1@pci0:0:3:3: class=0x070002 card=0x02501028 chip=0x2a478086 rev=0x07
hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 4 Series Chipset AMT SOL Redirection'
class = simple comms
subclass = UART
bar [10] = type I/O Port, range 32, base 0xef88, size 8, enabled
bar [14] = type Memory, range 32, base 0xf6fda000, size 4096, enabled
em0@pci0:0:25:0: class=0x020000 card=0x02501028 chip=0x10f58086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82567LM Gigabit Network Connection'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xf6fe0000, size 131072, enabled
bar [14] = type Memory, range 32, base 0xf6fdb000, size 4096, enabled
bar [18] = type I/O Port, range 32, base 0xefe0, size 32, enabled
uhci0@pci0:0:26:0: class=0x0c0300 card=0x02501028 chip=0x29378086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0x6f60, size 32, enabled
uhci1@pci0:0:26:1: class=0x0c0300 card=0x02501028 chip=0x29388086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0x6f80, size 32, enabled
uhci2@pci0:0:26:2: class=0x0c0300 card=0x02501028 chip=0x29398086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0x6fa0, size 32, enabled
ehci0@pci0:0:26:7: class=0x0c0320 card=0x02501028 chip=0x293c8086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB2 EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfed1c400, size 1024, enabled
hdac0@pci0:0:27:0: class=0x040300 card=0x02501028 chip=0x293e8086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) HD Audio Controller'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xf6fdc000, size 16384, enabled
pcib2@pci0:0:28:0: class=0x060400 card=0x02501028 chip=0x29408086 rev=0x03
hdr=0x01
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) PCI Express Port 1'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:1: class=0x060400 card=0x02501028 chip=0x29428086 rev=0x03
hdr=0x01
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) PCI Express Port 2'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:28:2: class=0x060400 card=0x02501028 chip=0x29448086 rev=0x03
hdr=0x01
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) PCI Express Port 3'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:28:3: class=0x060400 card=0x02501028 chip=0x29468086 rev=0x03
hdr=0x01
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) PCI Express Port 4'
class = bridge
subclass = PCI-PCI
uhci3@pci0:0:29:0: class=0x0c0300 card=0x02501028 chip=0x29348086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0x6f00, size 32, enabled
uhci4@pci0:0:29:1: class=0x0c0300 card=0x02501028 chip=0x29358086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0x6f20, size 32, enabled
uhci5@pci0:0:29:2: class=0x0c0300 card=0x02501028 chip=0x29368086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0x6f40, size 32, enabled
ehci1@pci0:0:29:7: class=0x0c0320 card=0x02501028 chip=0x293a8086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB2 EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfed1c000, size 1024, enabled
pcib6@pci0:0:30:0: class=0x060401 card=0x02501028 chip=0x24488086 rev=0x93
hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Mobile PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x02501028 chip=0x29178086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = 'ICH9M-E LPC Interface Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x02501028 chip=0x29298086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI
mode]'
class = mass storage
subclass = SATA
bar [10] = type I/O Port, range 32, base 0x6e70, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x6e78, size 4, enabled
bar [18] = type I/O Port, range 32, base 0x6e80, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x6e88, size 4, enabled
bar [20] = type I/O Port, range 32, base 0x6ea0, size 32, enabled
bar [24] = type Memory, range 32, base 0xfed1c800, size 2048, enabled
ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x02501028 chip=0x29308086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) SMBus Controller'
class = serial bus
subclass = SMBus
bar [10] = type Memory, range 64, base 0xf6fd9f00, size 256, enabled
bar [20] = type I/O Port, range 32, base 0x1100, size 32, enabled
vgapci0@pci0:1:0:0: class=0x030000 card=0x02501028 chip=0x065c10de rev=0xa1
hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'G96M [Quadro FX 770M]'
class = display
subclass = VGA
bar [10] = type Memory, range 32, base 0xf5000000, size 16777216, enabled
bar [14] = type Prefetchable Memory, range 64, base 0xe0000000, size
268435456, enabled
bar [1c] = type Memory, range 64, base 0xf2000000, size 33554432, enabled
bar [24] = type I/O Port, range 32, base 0xdf00, size 128, enabled
iwn0@pci0:12:0:0: class=0x028000 card=0x11218086 chip=0x42358086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
device = 'Ultimate N WiFi Link 5300'
class = network
bar [10] = type Memory, range 64, base 0xf1ffe000, size 8192, enabled
cbb0@pci0:3:1:0: class=0x060700 card=0x02501028 chip=0x04761180 rev=0xba
hdr=0x02
vendor = 'Ricoh Co Ltd'
device = 'RL5c476 II'
class = bridge
subclass = PCI-CardBus
bar [10] = type Memory, range 32, base 0xf1b00000, size 4096, enabled
none2@pci0:3:1:1: class=0x0c0010 card=0x02501028 chip=0x08321180 rev=0x04
hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'R5C832 IEEE 1394 Controller'
class = serial bus
subclass = FireWire
bar [10] = type Memory, range 32, base 0xf1bff800, size 2048, enabled
sdhci_pci0@pci0:3:1:2: class=0x080501 card=0x02501028 chip=0x08221180 rev=0x21
hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'
class = base peripheral
subclass = SD host controller
bar [10] = type Memory, range 32, base 0xf1bff600, size 256, enabled
none3@pci0:3:1:3: class=0x088000 card=0x02501028 chip=0x08431180 rev=0x11
hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'R5C843 MMC Host Controller'
class = base peripheral
bar [10] = type Memory, range 32, base 0xf1bff700, size 256, enabled
g1-235(10.0-C)[4] exit
Script done on Thu Mar 21 06:08:35 2013
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #845 r248575M/248575: Thu Mar 21 05:35:06 PDT 2013
r...@g1-235.catwhisker.org:/usr/obj/usr/src/sys/CANARY i386
FreeBSD clang version 3.2 (tags/RELEASE_32/final 170710) 20121221
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
MEMGUARD DEBUGGING ALLOCATOR INITIALIZED:
MEMGUARD map base: 0xc7000000
MEMGUARD map limit: 0xcd681000
MEMGUARD map size: 104964 KBytes
CPU: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz (2793.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 Stepping =
6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3616292864 (3448 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <DELL M09 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL M09 > on motherboard
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, df351c00 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 2 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x930,0x934 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem
0xf5000000-0xf5ffffff,0xe0000000-0xefffffff,0xf2000000-0xf3ffffff irq 16 at
device 0.0 on pci1
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port
0xef78-0xef7f,0xef70-0xef73,0xef80-0xef87,0xef74-0xef77,0xef90-0xef9f irq 18 at
device 3.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.7> port 0xefe0-0xefff mem
0xf6fe0000-0xf6ffffff,0xf6fdb000-0xf6fdbfff irq 22 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:24:e8:9c:11:0f
uhci0: <Intel 82801I (ICH9) USB controller> port 0x6f60-0x6f7f irq 20 at device
26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x6f80-0x6f9f irq 21 at device
26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x6fa0-0x6fbf irq 22 at device
26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfed1c400-0xfed1c7ff irq
22 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
hdac0: <Intel 82801I HDA Controller> mem 0xf6fdc000-0xf6fdffff irq 21 at device
27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib3
iwn0: <Intel Ultimate N WiFi Link 5300> mem 0xf1ffe000-0xf1ffffff irq 17 at
device 0.0 on pci12
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci13: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci14: <ACPI PCI bus> on pcib5
uhci3: <Intel 82801I (ICH9) USB controller> port 0x6f00-0x6f1f irq 20 at device
29.0 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x6f20-0x6f3f irq 21 at device
29.1 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x6f40-0x6f5f irq 22 at device
29.2 on pci0
uhci5: LegSup = 0x2f00
usbus6 on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfed1c000-0xfed1c3ff irq
20 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib6
cbb0: <RF5C476 PCI-CardBus Bridge> irq 19 at device 1.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci3: <serial bus, FireWire> at device 1.1 (no driver attached)
sdhci_pci0: <RICOH R5C822 SD> mem 0xf1bff600-0xf1bff6ff irq 18 at device 1.2 on
pci3
sdhci_pci0: 1 slot(s) allocated
pci3: <base peripheral> at device 1.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9M AHCI SATA controller> port
0x6e70-0x6e77,0x6e78-0x6e7b,0x6e80-0x6e87,0x6e88-0x6e8b,0x6ea0-0x6ebf mem
0xfed1c800-0xfed1cfff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1100-0x111f mem
0xf6fd9f00-0xf6fd9fff irq 19 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xcffff pnpid ORM0000
on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default to deny,
logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
hdacc0: <IDT 92HD71B7 HDA CODEC> at cad 0 on hdac0
hdaa0: <IDT 92HD71B7 Audio Function Group> at nid 1 on hdacc0
pcm0: <IDT 92HD71B7 (Analog 2.0+HP/2.0)> at nid 13,10 and 11,14 on hdaa0
pcm1: <IDT 92HD71B7 (Analog)> at nid 15 and 24 on hdaa0
pcm2: <IDT 92HD71B7 (Rear Digital)> at nid 30 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen3.1: <Intel> at usbus3
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <Intel> at usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen5.1: <Intel> at usbus5
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <Intel> at usbus4
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen7.1: <Intel> at usbus7
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen6.1: <Intel> at usbus6
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
Expensive timeout(9) function: 0xc05655d0(0xce040880) 0.004837067 s
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <ST95005620AS SD23> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
cd0 at ahcich1 bus 0 scbus3 target 0 lun 0
cd0: <TSSTcorp DVD+-RW TS-U633A D200> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
uhub2: 6 ports with 6 removable, self powered
uhub6: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ada0s4a [rw]...
warning: total configured swap (5242880 pages) exceeds maximum recommended
amount (2097312 pages).
warning: increase kern.maxswzone or reduce amount of swap.
lock order reversal:
1st 0xceb8a4a4 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2177
2nd 0xc6d5e080 bufwait (bufwait) @ /usr/src/sys/ufs/ffs/ffs_vnops.c:262
3rd 0xceb87ea0 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2177
KDB: stack backtrace:
db_trace_self_wrapper(c0fc2e4c,3236323a,a,1,5c,...) at 0xc0526b9d =
db_trace_self_wrapper+0x2d/frame 0xfe8af2c0
kdb_backtrace(c0fc5fa7,ceb87ea0,c0fae0b2,cd809f00,c0fcf3a3,...) at 0xc0a8f9f0 =
kdb_backtrace+0x30/frame 0xfe8af328
witness_checkorder(ceb87ea0,9,c0fcf3a3,881,ceb87ec0,...) at 0xc0aa634d =
witness_checkorder+0xbad/frame 0xfe8af378
__lockmgr_args(ceb87ea0,80100,ceb87ec0,0,0,...) at 0xc0a3b1d4 =
__lockmgr_args+0x894/frame 0xfe8af44c
ffs_lock(fe8af4d0,cd805370,cd8021e0,cd8080f0,cd8021e0,...) at 0xc0cd5de7 =
ffs_lock+0x87/frame 0xfe8af488
VOP_LOCK1_APV(c111b600,fe8af4d0,c0fcc518,180,c112dfe8,...) at 0xc0e13722 =
VOP_LOCK1_APV+0x112/frame 0xfe8af4b8
_vn_lock(ceb87e6c,80100,c0fcf3a3,881,c0fce639,...) at 0xc0b0c6a1 =
_vn_lock+0xa1/frame 0xfe8af4f8
vget(ceb87e6c,80100,ce02bc00,57,0,...) at 0xc0afb1e4 = vget+0x74/frame
0xfe8af530
vfs_hash_get(ce74d7e0,78c03,80000,ce02bc00,fe8af610,...) at 0xc0aeec4c =
vfs_hash_get+0xfc/frame 0xfe8af55c
ffs_vgetf(ce74d7e0,78c03,80000,fe8af610,1,...) at 0xc0cd0727 =
ffs_vgetf+0x47/frame 0xfe8af5b8
softdep_sync_buf(ceb8a470,c6d5e020,1,108,0,...) at 0xc0cc9607 =
softdep_sync_buf+0x977/frame 0xfe8af620
ffs_syncvnode(ceb8a470,1,0,c10ede5c,246,...) at 0xc0cd6c63 =
ffs_syncvnode+0x2a3/frame 0xfe8af678
ffs_truncate(ceb8a470,200,0,880,cd955e80,...) at 0xc0cabbae =
ffs_truncate+0x69e/frame 0xfe8af830
ufs_direnter(ceb8a470,ceb87e6c,fe8af8f0,fe8afbcc,0,...) at 0xc0cde66d =
ufs_direnter+0x7ed/frame 0xfe8af8b0
ufs_makeinode(fe8afbb8,fe8afbcc) at 0xc0ce7d07 = ufs_makeinode+0x537/frame
0xfe8afa24
ufs_create(fe8afb10,c0fd0a38,60d,ce74d7f0,2,...) at 0xc0ce3aff =
ufs_create+0x2f/frame 0xfe8afa38
VOP_CREATE_APV(c111b600,fe8afb10,fe8afbcc,fe8afaa0,fe8afad0,...) at 0xc0e10d30
= VOP_CREATE_APV+0x100/frame 0xfe8afa68
vn_open_cred(fe8afb80,fe8afbfc,1a4,0,cd955e80,ce7a53b8) at 0xc0b0bebf =
vn_open_cred+0x2cf/frame 0xfe8afb38
vn_open(fe8afb80,fe8afbfc,1a4,ce7a53b8,fe8afbe0,...) at 0xc0b0bbeb =
vn_open+0x3b/frame 0xfe8afb58
kern_openat(ce02bc00,ffffff9c,2882a544,0,601,1b6) at 0xc0b0453c =
kern_openat+0x1ec/frame 0xfe8afc20
sys_open(ce02bc00,fe8afcc8,c1015153,e9,db,...) at 0xc0b042c8 =
sys_open+0x38/frame 0xfe8afc40
syscall(fe8afd08) at 0xc0dee2dd = syscall+0x2ed/frame 0xfe8afcfc
Xint0x80_syscall() at 0xc0dd69a1 = Xint0x80_syscall+0x21/frame 0xfe8afcfc
--- syscall (5, FreeBSD ELF32, sys_open), eip = 0x281fd9e7, esp = 0xbfbfcd64,
ebp = 0xbfbfce10 ---
wlan0: Ethernet address: 00:21:6a:26:34:c0
Expensive timeout(9) function: 0xc0c4c0e0(0) 0.010557836 s
pgpnTRotSalbV.pgp
Description: PGP signature
