Going by Zaphod's recommendation of using a /32 for each IP, how about this?
ifconfig arge0 inet 192.168.1.100/32 ifconfig arge0 alias 192.169.1.100/32 I wouldn't recommend 192.169, though - only 192.168.x.x is reserved for private networks, and 192.169 is a valid IP-routable prefix, assigned to some US company. To be exact: The ranges from RFC1918 are 10.0.0.0/8, 172.16.0.0 /20 and 192.168.0.0/24. On Sat, Mar 9, 2013 at 9:57 AM, Yasir hussan <[email protected]> wrote: > Kindly will u give me example with cammand line, which can test on my > freebsd machine, i want two ips 192.168.1.100 and 192.169.1.100 to be work > on single network interface, my default interface for network is arge0 > > On Sat, Mar 9, 2013 at 3:08 AM, Zaphod Beeblebrox <[email protected]> wrote: > >> On Sat, Mar 9, 2013 at 3:04 AM, Yasir hussan <[email protected]> wrote: >> >>> i just want to run multiple IPs for single network card in freebsd >>> >>> >> OK. A better question. About the only caution I can give here (assuming >> you don't mean something more interesting like vlans and whatnot) is that >> if both IP addresses are on the SAME network, use a /32 as the netmask (it >> works better). If they are on different networks, specify the netmask as >> normal. >> >> You may, at this point, need a method to choose which IP address to use >> for any particular connection. There's a pile of documentation waiting for >> you. >> >> > _______________________________________________ > [email protected] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "[email protected]" _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[email protected]"
