On Monday, May 07, 2012 5:25:02 pm Anton Shterenlikht wrote:
> On Mon, May 07, 2012 at 10:39:51AM -0400, John Baldwin wrote:
> > On Friday, May 04, 2012 4:07:24 pm Anton Shterenlikht wrote:
> > > On Fri, May 04, 2012 at 11:07:59AM -0400, John Baldwin wrote:
> > > > On Friday, May 04, 2012 7:51:33 am Anton Shterenlikht wrote:
> > > > > On Thu, May 03, 2012 at 02:46:18PM -0400, John Baldwin wrote:
> > > > > > On Thursday, May 03, 2012 11:35:19 am Anton Shterenlikht wrote:
> > > > > > > On Tue, May 01, 2012 at 12:35:26PM +0100, Anton Shterenlikht
> > > > > > > wrote:
> > > > > > > > On Mon, Apr 30, 2012 at 08:43:14AM -0400, John Baldwin wrote:
> > > > > > > > > >
> > > > > > > > > > I also see:
> > > > > > > > > >
> > > > > > > > > > ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0exb
> > > > > > > > > > ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
> > > > > > > > > > ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
> > > > > > > > >
> > > > > > > > > Hmmm, I don't know how to grok these lines, but does your
> > > > > > > > > disk work
> > > > at
> > > > > > all now
> > > > > > > > > with any kernel? It may be that your disk has died (or a
> > > > > > > > > cable,
> > > > etc.)
> > > > > > and it
> > > > > > > > > just happened to coincide with your upgrade?
> > > > > > > >
> > > > > > > > I reverted back to r231158, built world and generic
> > > > > > > > kernel (minus all modules, i.e. "option MODULES_OVERRIDE=").
> > > > > > > > This works, see the verbose boot dmesg at the end.
> > > > > > > >
> > > > > > > > I think I'll just do a binary search.
> > > > > > >
> > > > > > > I traced it to r233677.
> > > > > > > The only change from 233676 to 233677 is
> > > > > > > in /sys/dev/pci/pci.c
> > > > > > >
> > > > > > > My kernel is GENERIC with no modules
> > > > > > > and with various bits removed, e.g. all raid devices
> > > > > > > and PCI network devices, which I definitely
> > > > > > > haven't got on this laptop.
> > > > > > >
> > > > > > > Below is the verbose boot with r233676.
> > > > > > > Apparently at the beginning there's also
> > > > > > > the previous unsuccessful boot with r233677.
> > > > > > > Is this a new feature? I didn't know the
> > > > > > > previous dmesg is preserved after a reboot.
> > > > > > > Anyway, you can see clearly the error with r233677.
> > > > > > >
> > > > > > > I guess this is something to do with
> > > > > > > ata -> ada change?
> > > > > >
> > > > > > I don't think so.
> > > > > >
> > > > > > Please try just this change:
> > > > > >
> > > > > > Index: pci.c
> > > > > > ===================================================================
> > > > > > --- pci.c (revision 234928)
> > > > > > +++ pci.c (working copy)
> > > > > > @@ -2822,10 +2822,14 @@ pci_add_map(device_t bus, device_t dev, int
> > > > > > reg, s
> > > > > > * from the parent.
> > > > > > */
> > > > > > resource_list_delete(rl, type, reg);
> > > > > > - } else {
> > > > > > + start = 0;
> > > > > > + device_printf(bus,
> > > > > > + "pci%d:%d:%d:%d bar %#x failed to allocate",
> > > > > > + pci_get_domain(dev), pci_get_bus(dev),
> > > > > > pci_get_slot(dev),
> > > > > > + pci_get_function(dev), reg);
> > > > > > + } else
> > > > > > start = rman_get_start(res);
> > > > > > - pci_write_bar(dev, pm, start);
> > > > > > - }
> > > > > > + pci_write_bar(dev, pm, start);
> > > > > > return (barlen);
> > > > > > }
> > > > > >
> > > > >
> > > > > That helped, thank you.
> > > >
> > > > Bizarre, can you get a regular dmesg with that change applied?
> > >
> >
> > Hmm, I missed a newline at the end. :) Looks like this happened twice.
> > I've added the relevant verbose boot messages from your earlier kernel
> > below each one:
> >
> > > pci0: <ACPI PCI bus> on pcib0
> > > pci0: pci0:0:20:2 bar 0x10 failed to allocate
> > > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> >
> > found-> vendor=0x1002, dev=0x4383, revid=0x00
> > domain=0, bus=0, slot=20, func=2
> > class=04-03-00, hdrtype=0x00, mfdev=0
> > cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
> > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=10
> > powerspec 2 supports D0 D3 current D0
> > map[10]: type Memory, range 64, base 0xcc408000, size 14, enabled
> > pcib0: matched entry for 0.20.INTA
> > pcib0: slot 20 INTA hardwired to IRQ 16
> >
> > > pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> > > pcib4: failed to allocate initial memory window: 0xcc100000-0xcc1fffff
> > > pci2: <ACPI PCI bus> on pcib4
> > > pci2: pci0:2:4:0 bar 0x10 failed to allocate
> > > cbb0: <RF5C476 PCI-CardBus Bridge> irq 20 at device 4.0 on pci2
> >
> > found-> vendor=0x1180, dev=0x0476, revid=0xb6
> > domain=0, bus=2, slot=4, func=0
> > class=06-07-00, hdrtype=0x02, mfdev=1
> > cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
> > lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750
> > ns)
> > intpin=a, irq=10
> > powerspec 2 supports D0 D1 D2 D3 current D0
> > map[10]: type Memory, range 32, base 0xcc100000, size 12, enabled
> > pcib4: failed to allocate initial memory window
> > (0xcc100000-0xcc1fffff,0x100000)
> > pcib4: matched entry for 2.4.INTA
> > pcib4: slot 4 INTA hardwired to IRQ 20
> > cbb0: <RF5C476 PCI-CardBus Bridge> irq 20 at device 4.0 on pci2
> > pcib0: allocated type 3 (0xcc500000-0xcc5fffff) for rid 20 of pcib4
> > pcib4: allocated initial memory window of 0xcc500000-0xcc5fffff
> > pcib4: allocated memory range (0xcc500000-0xcc500fff) for rid 10 of cbb0
> > cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xcc500000
> >
> > So the second case actually recovers and allocates a different range.
> >
> > Can you try booting with 'debug.acpi.disabled=sysres' set in the loader?
>
> You mean without the patch?
Either way.
> > Also, can you get the output of 'devinfo -rv' from a working kernel?
Oops, I meant to ask for devinfo -u, sorry. :(
Oh, I see it now. Your BIOS is broken.
The hdac0 device is assigned a resource that conflicts with pcib4, though
that is the one we recover from:
> hdac0 pnpinfo vendor=0x1002 device=0x4383 subvendor=0x103c
> subdevice=0x30c2 class=0x040300 at slot=20 function=2 handle=\_SB_.C08B.C0FD
> Interrupt request lines:
> 16
> I/O memory addresses:
> 0xcc100000-0xcc103fff
For the CardBus Bridge, the issue is this device:
> ahci0 pnpinfo vendor=0x1002 device=0x4380 subvendor=0x1002
> subdevice=0x4380 class=0x01018f at slot=18 function=0 handle=\_SB_.C08B.C275
> Interrupt request lines:
> 16
> I/O ports:
> 0x5018-0x501b
> 0x5020-0x502f
> 0x9000-0x9007
> 0x9008-0x900b
> 0x9010-0x9017
> I/O memory addresses:
> 0xcc409000-0xcc4093ff
That last memory BAR conflicts with the desired range of 0xcc408000-0xcc40c000.
I'm not sure why BIOS writers are so grossly incompetent, but such is life.
Try this:
Index: pci.c
===================================================================
--- pci.c (revision 235475)
+++ pci.c (working copy)
@@ -2815,13 +2815,36 @@ pci_add_map(device_t bus, device_t dev, int reg, s
*/
res = resource_list_reserve(rl, bus, dev, type, ®, start, end, count,
prefetch ? RF_PREFETCHABLE : 0);
+ if (res == NULL && (start != 0 || end != ~0ul)) {
+ /*
+ * If the allocation fails, try to allocate a resource for
+ * this BAR using any available range. The firmware felt
+ * it was important enough to assign a resource, so don't
+ * disable decoding if we can help it.
+ */
+ resource_list_delete(rl, type, reg);
+ start = 0;
+ end = ~0ul;
+ resource_list_add(rl, type, reg, 0, ~0ul, count);
+ resource_list_add(rl, type, reg, start, end, count);
+ res = resource_list_reserve(rl, bus, dev, type, ®, 0, ~0ul,
+ count, prefetch ? RF_PREFETCHABLE : 0);
+ }
if (res == NULL) {
/*
* If the allocation fails, delete the resource list entry
- * to force pci_alloc_resource() to allocate resources
- * from the parent.
+ * and disable decoding for this device.
+ *
+ * If the driver requests this resource in the future,
+ * pci_reserve_map() will try to allocate fresh resources.
*/
resource_list_delete(rl, type, reg);
+ pci_disable_io(dev, type);
+ start = 0;
+ device_printf(bus,
+ "pci%d:%d:%d:%d bar %#x failed to allocate",
+ pci_get_domain(dev), pci_get_bus(dev), pci_get_slot(dev),
+ pci_get_function(dev), reg);
} else {
start = rman_get_start(res);
pci_write_bar(dev, pm, start);
--
John Baldwin
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
