Dear All ,
Today I have encountered a case which I think informing you about it may be
useful .
In my previous messages , I have mentioned very slowness of KDE4 .
Onto another computer I have installed DruidBSD 9.0 b56 amd64 , and KDE4 .
In that installation KDE4 worked surprisingly fast .
To understand whether difference is among FreeBSD or DruidBSD , I have
installed
FreeBSD 9.0 Release amd64 and KDE4 on the same computer instead of DruidBSD
.
The KDE4 has worked flawlesly i.e. , means very fast .
To make equivalent the installations on both computers , I have installed
FreeBSD 9.0 Release amd64 and KDE4 on the slow computer exactly as in fast
computer .
Starting times after first boot ( to eliminate initialization effects ) are
the following
( All timings are from "root" ) :
>From "startx" ( which contains "exec ... kde4 ..." )
to appearance of KDE menu symbol at the bottom left corner :
Fast computer : 8 GB : 0+ ( < 1 ) minute ( 4 x 2 GB )
Slow computer : 4 GB : 2+ ( < 3 ) minutes ( 2 x 2 GB ) ( 2 x ! GB chips
removed ) ,
6 GB : 8+ ( < 9 ) minutes ( 2 x ( 2 , 1 ) GB ) .
( Memory chip installation conforms to main board manual . )
( The clock does not have second counter . )
Fast Computer
CPU : Intel Pentium Dual CPU E2220 @ 2.40 GHz ( 2397.65-MHz K-8class CPU )
ACPI APIC Table : < INTEL DG965WH >
Slow Computer
CPU : Intel Core 2 QUAD CPU Q6600 @ 2.40 GHz ( 2397.65-MHz K-8class CPU )
ACPI APIC Table : < INTEL DG965WH >
( The main boards are the same ) .
( All of the memory chips are the same : Kingston HyperX 800 MHz )
I could not understand the reason(s) of the differences .
Boot DMESG outputs are attached .
Thank you very much .
Mehmet Erol Sanliturk
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Uptime: 1h17m23s
Rebooting...
cpu_reset: Stopping other CPUs
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012
r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Pentium(R) Dual CPU E2220 @ 2.40GHz (2397.65-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Family = 6 Model = f Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8163987456 (7785 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL DG965WH >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL DG965WH> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3410-0x3417 mem
0xe0200000-0xe02fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel G965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
pci0: <simple comms> at device 3.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x30e0-0x30ff mem
0xe0300000-0xe031ffff,0xe0324000-0xe0324fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:1c:c0:1e:c3:90
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x30c0-0x30df irq 16 at
device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x30a0-0x30bf irq 21 at
device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem
0xe0325c00-0xe0325fff irq 18 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
hdac0: <Intel 82801H High Definition Audio Controller> mem
0xe0320000-0xe0323fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <Marvell 88SX6101 UDMA133 controller> port
0x2018-0x201f,0x2024-0x2027,0x2010-0x2017,0x2020-0x2023,0x2000-0x200f mem
0xe0100000-0xe01001ff irq 17 at device 0.0 on pci2
ata2: <ATA channel 0> on atapci0
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x3080-0x309f irq 23 at
device 29.0 on pci0
uhci2: LegSup = 0x2f00
usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x3060-0x307f irq 19 at
device 29.1 on pci0
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x3040-0x305f irq 18 at
device 29.2 on pci0
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem
0xe0325800-0xe0325bff irq 23 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x1000-0x10ff mem
0xe0004800-0xe00048ff irq 22 at device 1.0 on pci6
vr0: Quirks: 0x0
vr0: Revision: 0x43
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:e0:4c:77:05:28
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xe0004000-0xe00047ff,0xe0000000-0xe0003fff irq 19 at device 3.0 on pci6
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:27:00:01:f3:0f:ec
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:f3:0f:ec
fwe0: Ethernet address: 02:90:27:f3:0f:ec
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:90:27:00:01:f3:0f:ec @ 0xfffe00000000, S400, maxrec
2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1414000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8 AHCI SATA controller> port
0x3408-0x340f,0x341c-0x341f,0x3400-0x3407,0x3418-0x341b,0x3020-0x303f mem
0xe0325000-0xe03257ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd0800-0xd17ff,0xd1800-0xd27ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
hdac0: HDA Codec #2: Sigmatel STAC9271D
pcm0: <HDA Sigmatel STAC9271D PCM #0 Analog> at cad 2 nid 1 on hdac0
pcm1: <HDA Sigmatel STAC9271D PCM #1 Analog> at cad 2 nid 1 on hdac0
pcm2: <HDA Sigmatel STAC9271D PCM #2 Digital> at cad 2 nid 1 on hdac0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <ST3250410AS 3.AAC> ATA-7 SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad6
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 9365828 Hz quality 1000
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
cd0 at ata2 bus 0 scbus0 target 1 lun 0
cd0: <ASUS DRW-22B2S 1.01> Removable CD-ROM SCSI-0 device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ugen5.2: <Macally> at usbus5
uhub7: <Macally iKey > on usbus5
uhub7: 3 ports with 2 removable, bus powered
ugen5.3: <Macally> at usbus5
ukbd0: <Macally iKey > on usbus5
kbd2 at ukbd0
ugen5.4: <Logitech> at usbus5
ums0: <Logitech Trackball, class 0/0, rev 1.10/2.20, addr 4> on usbus5
ums0: 3 buttons and [XYZ] coordinates ID=0
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012
r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2397.65-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 6442450944 (6144 MB)
avail memory = 6092128256 (5809 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL DG965WH >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL DG965WH> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3410-0x3417 mem
0xe0200000-0xe02fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel G965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
pci0: <simple comms> at device 3.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x30e0-0x30ff mem
0xe0300000-0xe031ffff,0xe0324000-0xe0324fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:1c:c0:1e:c4:05
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x30c0-0x30df irq 16 at
device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x30a0-0x30bf irq 21 at
device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem
0xe0325c00-0xe0325fff irq 18 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
hdac0: <Intel 82801H High Definition Audio Controller> mem
0xe0320000-0xe0323fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <Marvell 88SX6101 UDMA133 controller> port
0x2018-0x201f,0x2024-0x2027,0x2010-0x2017,0x2020-0x2023,0x2000-0x200f mem
0xe0100000-0xe01001ff irq 17 at device 0.0 on pci2
ata2: <ATA channel 0> on atapci0
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x3080-0x309f irq 23 at
device 29.0 on pci0
uhci2: LegSup = 0x2f00
usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x3060-0x307f irq 19 at
device 29.1 on pci0
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x3040-0x305f irq 18 at
device 29.2 on pci0
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem
0xe0325800-0xe0325bff irq 23 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0xe0004800-0xe00048ff
irq 18 at device 2.0 on pci6
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:1f:1f:38:bd:9c
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xe0004000-0xe00047ff,0xe0000000-0xe0003fff irq 19 at device 3.0 on pci6
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:27:00:01:f3:10:37
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:f3:10:37
fwe0: Ethernet address: 02:90:27:f3:10:37
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:90:27:00:01:f3:10:37 @ 0xfffe00000000, S400, maxrec
2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1424000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8 AHCI SATA controller> port
0x3408-0x340f,0x341c-0x341f,0x3400-0x3407,0x3418-0x341b,0x3020-0x303f mem
0xe0325000-0xe03257ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd0800-0xd17ff,0xd1800-0xd27ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
hdac0: HDA Codec #2: Sigmatel STAC9271D
pcm0: <HDA Sigmatel STAC9271D PCM #0 Analog> at cad 2 nid 1 on hdac0
pcm1: <HDA Sigmatel STAC9271D PCM #1 Analog> at cad 2 nid 1 on hdac0
pcm2: <HDA Sigmatel STAC9271D PCM #2 Digital> at cad 2 nid 1 on hdac0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ada0 at ahcich4 bus 0 scbus5 target 0 lun 0
ada0: <ST3250410AS 3.AAF> ATA-7 SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad14
SMP: AP CPU #3 Launched!
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <ASUS DRW-22B2S 1.01> Removable CD-ROM SCSI-0 device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, SMP: AP CPU #1 Launched!
PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
cd1 at ata2 bus 0 scbus0 target 1 lun 0
SMP: AP CPU #2 Launched!
cd1: <PHILIPS SPD2414T P1.0> Removable CD-ROM SCSI-0 device
cd1: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
Timecounter "TSC-low" frequency 9365818 Hz quality 1000
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
Root mount waiting for: usbus6 usbus2
Root mount waiting for: usbus6 usbus2
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus6 usbus2
uhub6: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ugen0.2: <Logitech> at usbus0
ums0: <Logitech Trackball, class 0/0, rev 1.10/2.20, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen0.3: <Macally> at usbus0
uhub7: <Macally iKey > on usbus0
uhub7: 3 ports with 2 removable, bus powered
ugen0.4: <Macally> at usbus0
ukbd0: <Macally iKey > on usbus0
kbd2 at ukbd0
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
