Hello,
On 11/01/2012 20:33, Alexander Motin wrote:
I would like request for testing of my work on further HDA sound driver
improvement.
...
Comments and tests results are welcome!
I've been testing the first version of your patch on an HP 6510b, since
the 12th of January.
hdac0@pci0:0:27:0: class=0x040300 card=0x30c0103c chip=0x284b8086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) HD Audio Controller'
class = multimedia
subclass = HDA
mixer
Mixer vol is currently set to 80:80
Mixer bass is currently set to 75:75
Mixer treble is currently set to 40:40
Mixer pcm is currently set to 100:100
Mixer speaker is currently set to 0:0
Mixer line is currently set to 0:0
Mixer mic is currently set to 0:0
Mixer rec is currently set to 50:50
Mixer igain is currently set to 0:0
Mixer ogain is currently set to 0:0
Mixer monitor is currently set to 0:0
Recording source: monitor
So far I haven't encountered any regressions. There are however some small
issues that also are present with the old driver.
I have the following selection of recording devices:
Mixer line is currently set to 0:0
Mixer mic is currently set to 0:0
Mixer monitor is currently set to 0:0
To record from the microphone, I have to use the monitor device:
Recording source: monitor
Physically neither the notebook nor the docking station have a line
in socket. Of course such a thing might simply be on board and NC.
Setting a volume for line, mic or monitor has no effect. To hear the
microphone on my speakers/headphones I have to use igain instead.
Igain sets the microphone volume independent of the recording source.
There's also ogain, which doesn't seem to do anything either.
What I expect is that the recording source for the microphone was
mic and that the monitor recording source could be used to record
the cumulative output of all channels.
Regards
--
A: Because it fouls the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[email protected]"
