On 12.08.2011 22:33, Alexander Burchell wrote:
I'm not being able to get my DVD-ROM recognized under 9-current,
although I used the 8.2-release DVD to install FreeBSD (and then
subsequently upgraded the system to the "head" version via svn-freebsd).
1) There is no /dev/*cd* ANYTHING at any time.
NOTE: I'm using a kernel (built with clang) using the ATA_CAM option so
I presume my DVD would be "/dev/acd0".
2) There is no indication in the boot log that the drive is probed. The
drive light does not flash (not sure if they even do that anymore),
however, after having moved it to another controller (AHCI SATA-3) I
sometimes get a log such as this:
ahcich1: Timeout on slot 0 port 0
ahcich1: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 100 serr
00000000
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
ahcich1: Timeout on slot 0 port 0
ahcich1: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 100 serr
00000000
It is an "Optiarc DVD RW AD-7190S". I believe it's at microcode 1.01 and
there is 1.03 available at manufacturer site however that leads me to:
Could you send me full verbose (boot -v) dmesgs with drive connected to
both chipset and Marvell controllers?
--
Alexander Motin
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
