----- Original Message ----- > From: Hans Petter Selasky <[email protected]> > To: [email protected]; PseudoCylon <[email protected]> > Cc: "[email protected]" <[email protected]> > Sent: Tuesday, June 28, 2011 12:50:57 AM > Subject: Re: [CFT] Sierra Wireless HSPA+ USB modem > > On Tuesday 28 June 2011 06:58:37 PseudoCylon wrote: >> Hello >> >> Here is a driver for Sierra Wireless HSPA+ USB modem. Please test it. My >> subscription will expire on June 29, 2011. (Yes, it sounds silly.) So, try >> it before too late. >> >> source tree https://gitorious.org/usie/usie/trees/master >> tarball https://gitorious.org/usie/usie/archive-tarball/master >> >> The driver should work on CURRENT and 8.2 RELEASE. >> Supports only Direct IP supported models with device ID of 0x68a3 >> >> (Direct IP == the device has a port we can throw IP packets at, no need to >> use any serial port) A list of supported device names are posted on >> FreeBSD forum. >> http://forums.freebsd.org/showthread.php?p=138758#post138758 >> >> >> * How to use >> 0) add a following to somewhere in /usr/src/sys/dev/usbdevs >> product AIRPRIME USB3080x68A3 USB308 HSPA+ USB Modem >> 1) compile >> 2) #kldload usie >> 3) plugin the device (Make sure load the module first) >> 4) wait while the modem is going though power up cycle >> 5) #dhclient usie0 >> 6) surf >> >> * To disconnect >> #ifconfig usie0 down >> or >> #kldunload usie >> > > Hi, > > I'm going to review and import your driver.
Thank you. BTW, U3G_DEV(SIERRA, MC8700, 0) in u3g.c and USIE_DEV(SIERRA,MC8700) in usie.c are referring the same device, and MC8700 should support direct IP. AK _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[email protected]"
