I have accept_rtadv enabled if it's not a router. See my post.
ifconfig with tunnel up is:
ifconfig
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:0d:9d:51:d4:7e
inet 136.186.229.112 netmask 0xffffff00 broadcast xxx.xxx.xxx.xxx
inet6 fe80::xxxx:xxxx:xxxx:xxxx%bge0 prefixlen 64 scopeid 0x5
inet6 xxxx:xxxx:xxxx:xxxx::xxxx prefixlen 64 duplicated
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
ether 00:02:b3:eb:28:b0
media: Ethernet autoselect (none)
status: no carrier
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1280
options=80000<LINKSTATE>
inet6 fe80::xxxx:xxxx:xxxx:xxxx%tun0 prefixlen 64 scopeid 0x9
inet6 xxxx:xxxx:xxxx::xxxx --> xxxx:xxxx:xxxx::xxxx prefixlen 128
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Opened by PID 17726
I canceled the address in case you wonder.
Mat
On 15/04/2011 17:54, Marcin Cieslak wrote:
Mattia Rossi<mro...@swin.edu.au> wrote:
fxp0 and em0
Can you show us what does "ifconfig" say on
your interfaces? There are few parameters
for the ICMPv6 Neighbor Discovery Protocol
that might be needed:
"ifconfig em0 inet6 accept_rtadv"
Those are nicely documented in ifconfig(8).
This is usually handled by the /etc/rc.d/*
stuff IF you have a current version of
/etc/rc.conf settings. (They changed a bit
in the meantime).
//Marcin
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
