Joseph Jacobson wrote:
>
> VESA is compiled into the kernel. I don't have a /boot/loader.conf
> file. Is there any other way for the VESA module to be loaded at boot,
> before /etc/rc runs? Also, none of the vidcontrol VESA modes work for
> me. (All this isn't a big deal, but the error message is weird).
Nope. Might be what Mike said. Nowadays, an increasing number of video
cards aren't VESA, or only do VESA with software drivers.
> I didn't express myself very well in the above paragraph. :) Here is the
> behavior exhibited by my box with apm. When apm is enabled in the bios,
> and 'apm -e enable' is run, 'halt -p' causes the system to reboot. 'zzz'
> causes the system to hang (unresponsive to keyboard and mouse input).
> (I didn't try all permutations of my apm bios settings with 'zzz' to see
> if I can work around the hang, but I don't think that's the cause).
> Pushing my power button during the hang state caused the system to reboot.
> Also, when apm is enabled, after a regular 'halt' or 'shutdown', pushing
> the power button causes the machine to reset, not turn off.
Might be a apm option thingy. I haven't tweaked this in quite a while,
but... in the past, by default APM 2.0 was _not_ activated, because some
older stuff would crash. The default in the kernel had some flags or
missed some flags that enabled it. Look up GENERIC/LINT, and check for
those flags.
--
Daniel C. Sobral (8-DCS)
[EMAIL PROTECTED]
[EMAIL PROTECTED]
One Unix to rule them all, One Resolver to find them,
One IP to bring them all and in the zone bind them.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
