Wow, i mounted my phone last nite and nothing that bad happened.
Is there any other messages in /var/log/messages??
hbca# dmesg | grep da
rum0: need multicast update callback
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <HTC Android Phone 0100> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 scbus0 target 0 lun 1
da1: <HTC Android Phone 0100> Removable Direct Access SCSI-2 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
(da1:umass-sim0:0:0:1): lost device
(da1:umass-sim0:0:0:1): removing device entry
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <HTC Android Phone 0100> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 scbus0 target 0 lun 1
da1: <HTC Android Phone 0100> Removable Direct Access SCSI-2 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
(da1:umass-sim0:0:0:1): lost device
(da1:umass-sim0:0:0:1): removing device entry
hbca#
On Wed, 20 Oct 2010, Jung-uk Kim wrote:
On Tuesday 19 October 2010 09:15 pm, Matt wrote:
My experience with a sleeping freebsd laptop has been shortlived!
Today I rebuilt world using clang & this morning's csup current.
Clang build went just swimmingly.
Unthinkingly, I closed my laptop lid and put it in my case.
When I got to my house, it was roasting with fans spinning and
sleep light flashing. No damage, thankfully.
Low and behold, hw.pci.do_power_resume=0 no longer lets my laptop
sleep!
I had recently fiddled with powerd, but problem persisted after
reverting to previous configuration of associated sysctls etc.
Interestingly, sleep bounce now fails with a hard freeze, which it
never has in the past.
Verbose output shows the wifi then re0 network interfaces going
from D0->D3 as last living output.
Please note problem persists regardless of user, X running,
sleep_delay sysctl, do_power_resume, do_power_nodriver, powerd
running/not running.
Without sleep bounce, problem is characterized by flashing sleep
light and spinning fans (CPU temperature is high).
No devices added or removed, was sleeping this morning before
buildworld. Is it worth rebuilding with gcc? Or a content change
and not a compiler issue? Any major pci changes lately maybe?
Can you please update source and try again? If it does not work,
please set a new tunable "hw.pci.do_power_suspend=0" and tell me
whether it helps or not. FYI, hw.pci.do_power_resume does not apply
to suspend any more. So, if you want to restore the previous
behaviour, you need both "hw.pci.do_power_resume=0" and
"hw.pci.do_power_suspend=0". However, my hunch tells me that you
only need the latter.
Also, if possible, I'd like to see 'devinfo -rv', 'pciconf -clv',
'acpidump -dt', and 'lspci -vvv' output. Note lspci is available via
ports/sysutils/pciutils.
Thanks,
Jung-uk Kim
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
