On Thursday 02 September 2010 15:23:46 Randy Stewart wrote: > Hi all: > > So I finally upgraded my 7.3stable main server to 8.1stable... > > And now my backup to atapi-cam is failing.. I get: > > r...@lakerest /usr/tmp]# /usr/local/bin/growisofs -Z /dev/cd0 -R -J > backup_init.08-31-2010.gz > > :-( unable to CAMGETPASSTHRU for /dev/cd0: Inappropriate ioctl for > > device > > > Now atapi-cam I have built into the kernel (not a loaded module).. and > so is scsibus.. and all > its friends. Cam control seems to see the device: > > [r...@lakerest /usr/tmp]# camcontrol devlist > <HP DVD Writer 1140r FH23> at scbus0 target 1 lun 0 (cd0,pass0) > > Any suggestions of what I left out of the kernel would be most > helpful.. > > Oh my kern.conf is: > > ***************************** > include GENERIC > ident mymachine > device atapicam > options IPDIVERT > options IPFIREWALL > ******************************* > > And its an i386 > > Thanks > > R > > ----- > Randall Stewart > rand...@lakerest.net > I've had pretty good luck in 8.1 with the ahci and ada drivers, which will present CDROMs as SCSI devices without ATAPICAM.
device ahci device ada # SCSI peripherals device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct SCSI access) And remove: # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering And ATAPICAM of course. -- Thanks, Josh Paetzel
signature.asc
Description: This is a digitally signed message part.
