i experienced the same problem running r209391. this might have to do
something with a fs being full. i saw these warnings during buildworld
when eventuall / ran out of space:
Jun 21 21:32:55 otaku kernel: pid 1398 (sakura), uid 1001 inumber
2661904 on /: filesystem full
Jun 21 21:32:59 otaku kernel: pid 1398 (sakura), uid 1001 inumber
2661904 on /: filesystem full
Jun 21 21:33:00 otaku kernel: pid 76033 (dd), uid 2 inumber 2591139 on
/: filesystem full
Jun 21 21:33:02 otaku kernel: pid 1398 (sakura), uid 1001 inumber
2661904 on /: filesystem full
Jun 21 21:33:07 otaku kernel: pid 75215 (chrome), uid 1001 inumber
18205737 on /: filesystem full
Jun 21 21:33:08 otaku kernel: pid 1467 (script), uid 1001 inumber
14226185 on /: filesystem full
Jun 21 21:33:08 otaku kernel: pid 1398 (sakura), uid 1001 inumber
2661904 on /: filesystem full
Jun 21 21:33:11 otaku kernel: pid 1398 (sakura), uid 1001 inumber
2661904 on /: filesystem full
Jun 21 21:33:18 otaku kernel: pid 75215 (chrome), uid 1001 inumber
18205702 on /: filesystem full
Jun 21 21:33:28 otaku kernel: pid 1398 (sakura), uid 1001 inumber
2661461 on /: filesystem full
Jun 21 21:33:39 otaku kernel: pid 1398 (sakura), uid 1001 inumber
2661461 on /: filesystem full
Jun 21 21:33:47 otaku kernel: pid 1398 (sakura), uid 1001 inumber
2661904 on /: filesystem full
Jun 21 21:33:48 otaku kernel: pid 75215 (chrome), uid 1001 inumber
16086093 on /: filesystem full
Jun 21 21:33:50 otaku kernel: pid 1398 (sakura), uid 1001 inumber
2661461 on /: filesystem full
followed by lots of
Jun 21 21:35:25 otaku kernel: bad block 7020785329444114652, ino 7468267
Jun 21 21:35:25 otaku kernel: pid 16 (softdepflush), uid 0 inumber
7468267 on /: bad block
Jun 21 21:35:25 otaku kernel: bad block -315669439672768816, ino 7468267
Jun 21 21:35:25 otaku kernel: pid 16 (softdepflush), uid 0 inumber
7468267 on /: bad block
Jun 21 21:35:25 otaku kernel: bad block -3220207053503867546, ino 7468267
Jun 21 21:35:25 otaku kernel: pid 16 (softdepflush), uid 0 inumber
7468267 on /: bad block
Jun 21 21:35:25 otaku kernel: bad block -6419917778393221405, ino 7468267
Jun 21 21:35:25 otaku kernel: pid 16 (softdepflush), uid 0 inumber
7468267 on /: bad block
Jun 21 21:35:25 otaku kernel: bad block 3919397040058727880, ino 7468267
Jun 21 21:35:25 otaku kernel: pid 16 (softdepflush), uid 0 inumber
7468267 on /: bad block
Jun 21 21:35:25 otaku kernel: bad block -6888424595660707789, ino 7468267
Jun 21 21:35:25 otaku kernel: pid 16 (softdepflush), uid 0 inumber
7468267 on /: bad block
Jun 21 21:35:25 otaku kernel:
g_vfs_done():ufs/rootfs[READ(offset=100240429127958528,
length=16384)]error = 5
Jun 21 21:35:25 otaku kernel: bad block -1173790944229704887, ino 7468267
Jun 21 21:35:25 otaku kernel: pid 16 (softdepflush), uid 0 inumber
7468267 on /: bad block
Jun 21 21:35:25 otaku kernel: bad block 5537349803492323867, ino 7468267
Jun 21 21:35:25 otaku kernel: pid 16 (softdepflush), uid 0 inumber
7468267 on /: bad block
Jun 21 21:35:25 otaku kernel: bad block 882554538064816358, ino 7468267
Jun 21 21:35:25 otaku kernel: pid 16 (softdepflush), uid 0 inumber
7468267 on /: bad block
Jun 21 21:35:25 otaku kernel: bad block -2565060229441336925, ino 7468267
~ 2 minutes later (see timestamp). i then did a `find / -inum 7468267`
but couldn't find the file. i then did a clean reboot using `shutdown
-r now`. the buffers got synched down to 0 however it said something
like "/ cannot be unmounted filesystem busy".
i then was thrown into single user mode due to the same problem alex
kada reported. at some point i did a `mount -f /` and did `dmesg -a >
/FEHLER`. strange thing is that everything seems to have been piped to
that file twice. after that i did `fastboot` and freebsd came up with
/ being clean (although the last fsck report said / was marked dirty).
i've attached the file.
cheers.
--
Alexander Best
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0 r209391: Mon Jun 21 17:53:14 CEST 2010
r...@otaku:/usr/obj/usr/src/sys/ARUNDEL amd64
CPU: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (1800.04-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Family = 6 Model = f Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2045149184 (1950 MB)
Event timer "LAPIC" frequency 0 Hz quality 500
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem
0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf4000000-0xf5ffffff irq 16 at
device 0.0 on pci1
nvidia0: <GeForce 9600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
uhci0: <Intel 82801I (ICH9) USB controller> port 0xe100-0xe11f irq 16 at device
26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xe200-0xe21f irq 21 at device
26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xe000-0xe01f irq 18 at device
26.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfa205000-0xfa2053ff irq
18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
hdac0: <Intel 82801I High Definition Audio Controller> mem
0xfa200000-0xfa203fff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci0: <JMicron JMB363 AHCI SATA controller> mem 0xfa000000-0xfa001fff irq 19
at device 0.0 on pci3
ahci0: [ITHREAD]
ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
atapci0: <JMicron JMB363 UDMA133 controller> port
0xc000-0xc007,0xc100-0xc103,0xc200-0xc207,0xc300-0xc303,0xc400-0xc40f irq 16 at
device 0.1 on pci3
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci3: <Intel 82801I (ICH9) USB controller> port 0xe300-0xe31f irq 23 at device
29.0 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xe400-0xe41f irq 19 at device
29.1 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0xe500-0xe51f irq 18 at device
29.2 on pci0
uhci5: [ITHREAD]
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfa204000-0xfa2043ff irq
23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
ath0: <Atheros 5212> mem 0xfa100000-0xfa10ffff irq 19 at device 1.0 on pci5
ath0: [ITHREAD]
ath0: AR2413 mac 7.9 RF2413 phy 4.5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel ICH9 AHCI SATA controller> port
0xe600-0xe607,0xe700-0xe703,0xe800-0xe807,0xe900-0xe903,0xea00-0xea1f mem
0xfa206000-0xfa2067ff irq 19 at device 31.2 on pci0
ahci1: [ITHREAD]
ahci1: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich5: [ITHREAD]
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich6: [ITHREAD]
ahcich7: <AHCI channel> at channel 5 on ahci1
ahcich7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: [FILTER]
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
hpet0: [FILTER]
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc0: [FILTER]
Event timer "RTC" frequency 32768 Hz quality 0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd27ff,0xd3000-0xd5fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 925092506000925
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 925092506000925
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Starting kernel event timers: LAPIC @ 1000Hz, HPET @ 128Hz
Timecounters tick every 1.000 msec
hdac0: HDA Codec #2: Realtek ALC885
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
pcm0: <HDA Realtek ALC885 PCM #0 Analog> at cad 2 nid 1 on hdac0
pcm1: <HDA Realtek ALC885 PCM #1 Analog> at cad 2 nid 1 on hdac0
pcm2: <HDA Realtek ALC885 PCM #2 Digital> at cad 2 nid 1 on hdac0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ada0 at ahcich2 bus 0 scbus3 target 0 lun 0
ada0: <SAMSUNG SP2504C VT100-50> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238474MB (488395055 512 byte sectors: 16H 63S/T 16383C)
cd0 at ata2 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-H10N JL12> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Root mount waiting for: usbus3
ugen3.2: <vendor 0x0424> at usbus3
uhub8: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on
usbus3
Root mount waiting for: usbus3
uhub8: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ufs/rootfs
WARNING: / was not properly dismounted
/: mount pending error: blocks -65408 files 0
Setting hostuuid: 00000000-0000-0000-0000-001a4d4bb4eb.
Setting hostid: 0x52f33628.
Entropy harvesting:
interrupts
ethernet
point_to_point
ugen1.2: <Dell> at usbus1
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 2> on usbus1
kbd0 at ukbd0
kickstart
.
Starting file system checks:
** SU+J Recovering /dev/ufs/rootfs
** Reading 33554432 byte journal from inode 3.
ugen1.3: <Razer> at usbus1
ums0: <Razer Razer 1600dpi Mouse, class 0/0, rev 2.00/21.00, addr 3> on usbus1
ums0: 7 buttons and [XYZ] coordinates ID=0
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
fsck:
/dev/ufs/rootfs: Abort trap: 6
Unknown error; help!
ERROR: ABORTING BOOT (sending SIGTERM to parent)!
Jun 22 02:59:50 init: /bin/sh on /etc/rc terminated abnormally, going to single
user mode
Enter root password, or ^D to go multi-user
Password:
Jun 22 03:00:00 init: single-user login failed
Password:
Jun 22 03:00:01 init: NSSWITCH(_nsdispatch): nis, passwd_compat, endpwent, not
found, and no fallback provided
Enter full pathname of shell or RETURN for
/bin/sh
:
#
f
s
c
k
/
** /dev/ufs/rootfs
USE JOURNAL?? [yn]
** SU+J Recovering /dev/ufs/rootfs
** Reading 33554432 byte journal from inode 3.
RECOVER? [yn]
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
fsck:
/dev/ufs/rootfs: Abort trap: 6
#
f
s
c
k
/
** /dev/ufs/rootfs
USE JOURNAL?? [yn]
** Skipping journal, falling through to full fsck
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? [yn]
SUMMARY INFORMATION BAD
SALVAGE? [yn]
BLK(S) MISSING IN BIT MAPS
SALVAGE? [yn]
625852 files, 97187728 used, 17004793 free (217921 frags, 2098359 blocks, 0.2%
fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
***** FILE SYSTEM WAS MODIFIED *****
#
\^G
\^G
\^G
f
s
c
k
/
** /dev/ufs/rootfs
USE JOURNAL?? [yn]
** SU+J Recovering /dev/ufs/rootfs
Journal timestamp does not match fs mount time
** Skipping journal, falling through to full fsck
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
#
***** FILE SYSTEM MARKED DIRTY *****
#
m
o
u
n
t
-
f
/
#
f
s
c
k
&
\^H\^[[K
/
** /dev/ufs/rootfs (NO WRITE)
USE JOURNAL?? no
** Skipping journal, falling through to full fsck
SETTING DIRTY FLAG IN READ_ONLY MODE
UNEXPECTED SOFT UPDATE INCONSISTENCY
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
#
t
u
n
e
f
s
-
p
/
tunefs:
POSIX.1e ACLs: (-a) disabled
tunefs:
NFSv4 ACLs: (-N) disabled
tunefs:
MAC multilabel: (-l) disabled
tunefs:
soft updates: (-n) enabled
tunefs:
soft update journaling: (-j) enabled
tunefs:
gjournal: (-J) disabled
tunefs:
maximum blocks per file in a cylinder group: (-e) 2048
tunefs:
average file size: (-f) 16384
tunefs:
average number of files in a directory: (-s) 64
tunefs:
minimum percentage of free space: (-m) 8%
tunefs:
optimization preference: (-o) time
tunefs:
volume label: (-L) rootfs
#
d
m
e
s
g
-
a
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0 r209391: Mon Jun 21 17:53:14 CEST 2010
r...@otaku:/usr/obj/usr/src/sys/ARUNDEL amd64
CPU: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (1800.04-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Family = 6 Model = f Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2045149184 (1950 MB)
Event timer "LAPIC" frequency 0 Hz quality 500
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem
0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf4000000-0xf5ffffff irq 16 at
device 0.0 on pci1
nvidia0: <GeForce 9600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
uhci0: <Intel 82801I (ICH9) USB controller> port 0xe100-0xe11f irq 16 at device
26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xe200-0xe21f irq 21 at device
26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xe000-0xe01f irq 18 at device
26.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfa205000-0xfa2053ff irq
18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
hdac0: <Intel 82801I High Definition Audio Controller> mem
0xfa200000-0xfa203fff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci0: <JMicron JMB363 AHCI SATA controller> mem 0xfa000000-0xfa001fff irq 19
at device 0.0 on pci3
ahci0: [ITHREAD]
ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
atapci0: <JMicron JMB363 UDMA133 controller> port
0xc000-0xc007,0xc100-0xc103,0xc200-0xc207,0xc300-0xc303,0xc400-0xc40f irq 16 at
device 0.1 on pci3
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci3: <Intel 82801I (ICH9) USB controller> port 0xe300-0xe31f irq 23 at device
29.0 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xe400-0xe41f irq 19 at device
29.1 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0xe500-0xe51f irq 18 at device
29.2 on pci0
uhci5: [ITHREAD]
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfa204000-0xfa2043ff irq
23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
ath0: <Atheros 5212> mem 0xfa100000-0xfa10ffff irq 19 at device 1.0 on pci5
ath0: [ITHREAD]
ath0: AR2413 mac 7.9 RF2413 phy 4.5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel ICH9 AHCI SATA controller> port
0xe600-0xe607,0xe700-0xe703,0xe800-0xe807,0xe900-0xe903,0xea00-0xea1f mem
0xfa206000-0xfa2067ff irq 19 at device 31.2 on pci0
ahci1: [ITHREAD]
ahci1: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich5: [ITHREAD]
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich6: [ITHREAD]
ahcich7: <AHCI channel> at channel 5 on ahci1
ahcich7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: [FILTER]
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
hpet0: [FILTER]
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc0: [FILTER]
Event timer "RTC" frequency 32768 Hz quality 0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd27ff,0xd3000-0xd5fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 925092506000925
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 925092506000925
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Starting kernel event timers: LAPIC @ 1000Hz, HPET @ 128Hz
Timecounters tick every 1.000 msec
hdac0: HDA Codec #2: Realtek ALC885
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
pcm0: <HDA Realtek ALC885 PCM #0 Analog> at cad 2 nid 1 on hdac0
pcm1: <HDA Realtek ALC885 PCM #1 Analog> at cad 2 nid 1 on hdac0
pcm2: <HDA Realtek ALC885 PCM #2 Digital> at cad 2 nid 1 on hdac0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ada0 at ahcich2 bus 0 scbus3 target 0 lun 0
ada0: <SAMSUNG SP2504C VT100-50> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238474MB (488395055 512 byte sectors: 16H 63S/T 16383C)
cd0 at ata2 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-H10N JL12> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Root mount waiting for: usbus3
ugen3.2: <vendor 0x0424> at usbus3
uhub8: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on
usbus3
Root mount waiting for: usbus3
uhub8: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ufs/rootfs
WARNING: / was not properly dismounted
/: mount pending error: blocks -65408 files 0
Setting hostuuid: 00000000-0000-0000-0000-001a4d4bb4eb.
Setting hostid: 0x52f33628.
Entropy harvesting:
interrupts
ethernet
point_to_point
ugen1.2: <Dell> at usbus1
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 2> on usbus1
kbd0 at ukbd0
kickstart
.
Starting file system checks:
** SU+J Recovering /dev/ufs/rootfs
** Reading 33554432 byte journal from inode 3.
ugen1.3: <Razer> at usbus1
ums0: <Razer Razer 1600dpi Mouse, class 0/0, rev 2.00/21.00, addr 3> on usbus1
ums0: 7 buttons and [XYZ] coordinates ID=0
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
fsck:
/dev/ufs/rootfs: Abort trap: 6
Unknown error; help!
ERROR: ABORTING BOOT (sending SIGTERM to parent)!
Jun 22 02:59:50 init: /bin/sh on /etc/rc terminated abnormally, going to single
user mode
Enter root password, or ^D to go multi-user
Password:
Jun 22 03:00:00 init: single-user login failed
Password:
Jun 22 03:00:01 init: NSSWITCH(_nsdispatch): nis, passwd_compat, endpwent, not
found, and no fallback provided
Enter full pathname of shell or RETURN for
/bin/sh
:
#
f
s
c
k
/
** /dev/ufs/rootfs
USE JOURNAL?? [yn]
** SU+J Recovering /dev/ufs/rootfs
** Reading 33554432 byte journal from inode 3.
RECOVER? [yn]
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
fsck:
/dev/ufs/rootfs: Abort trap: 6
#
f
s
c
k
/
** /dev/ufs/rootfs
USE JOURNAL?? [yn]
** Skipping journal, falling through to full fsck
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? [yn]
SUMMARY INFORMATION BAD
SALVAGE? [yn]
BLK(S) MISSING IN BIT MAPS
SALVAGE? [yn]
625852 files, 97187728 used, 17004793 free (217921 frags, 2098359 blocks, 0.2%
fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
***** FILE SYSTEM WAS MODIFIED *****
#
\\^G
\\^G
\\^G
f
s
c
k
/
** /dev/ufs/rootfs
USE JOURNAL?? [yn]
** SU+J Recovering /dev/ufs/rootfs
Journal timestamp does not match fs mount time
** Skipping journal, falling through to full fsck
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
#
***** FILE SYSTEM MARKED DIRTY *****
#
m
o
u
n
t
-
f
/
#
f
s
c
k
&
\\^H\\^[[K
/
** /dev/ufs/rootfs (NO WRITE)
USE JOURNAL?? no
** Skipping journal, falling through to full fsck
SETTING DIRTY FLAG IN READ_ONLY MODE
UNEXPECTED SOFT UPDATE INCONSISTENCY
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
#
t
u
n
e
f
s
-
p
/
tunefs:
POSIX.1e ACLs: (-a) disabled
tunefs:
NFSv4 ACLs: (-N) disabled
tunefs:
MAC multilabel: (-l) disabled
tunefs:
soft updates: (-n) enabled
tunefs:
soft update journaling: (-j) enabled
tunefs:
gjournal: (-J) disabled
tunefs:
maximum blocks per file in a cylinder group: (-e) 2048
tunefs:
average file size: (-f) 16384
tunefs:
average number of files in a directory: (-s) 64
tunefs:
minimum percentage of free space: (-m) 8%
tunefs:
optimization preference: (-o) time
tunefs:
volume label: (-L) rootfs
#
d
m
e
s
g
-
a
#
dmesg -a
>
/
F
E
H
L
E
R
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
