After switching to the new ATAPI drivers my system locks up every time I try to do a backup, only the mouse seems to be in action (So it seems that things are not quite lost... :)
This did not happen before the switch. Anyone else experiencing this? *** Relevant parts of my dmesg output *** CPU: AMD-K6(tm) 3D processor (333.39-MHz 586-class CPU) real memory = 134217728 (131072K bytes) avail memory = 128045056 (125044K bytes) ata-pci0: <VIA Apollo IDE controller> rev 0x06 on pci0.7.1 ata0 at 0x01f0 irq 14 on ata-pci0 ata1 at 0x0170 irq 15 on ata-pci0 ad0: <QUANTUM FIREBALL1280A/A63.0E00> ATA-? disk at ata0 as master ad0: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S ad0: 8 secs/int, 0 depth queue ad1: <WDC AC26400B/32.02S32> ATA-4 disk at ata1 as master ad1: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S ad1: 16 secs/int, 0 depth queue ast0: <CONNER CTT8000-A/2.08> tape drive at ata0 as slave ast0: Travan 4 (4 Gbyte) media, reverse, qfa, ecc, 512b ast0: Max speed=600Kb/s, Transfer limit=52 blocks, Buffer size=728 blocks changing root device to ad0s1a *** Relevant parts of my config file *** controller ata0 device atadisk0 device atapicd0 device atapist0 device atapifd0 options ATAPI options ATAPI_STATIC -- Erik H. Bakke | To be or not to be | CGI, konsulenttjenester, Habatech AS | is simply a question | hardware, software, e...@habatech.no | about binary logic | løsninger. To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-current" in the body of the message
