Appears the diff didn't get attached.
Here it is.
Sorry!
---Andrew Sherrod <ixk...@yahoo.com> wrote:
>
>
> As I now have upgraded at last, I tested the 3.0
> version of the patch. It does appear to make the
> system recognize the proper disk geometry where the
> standard wd.c does not report the proper size.
> Attached is the diff and 2 dmesgs, before and after.
>
> (Sorry for the length of the dmesg, haven't compeltely
> configured the kernel yet.)
>
> Any thoughts on the patch?
>
> Andrew Sherrod
>
>
>
> ---Andrew Sherrod <ixk...@yahoo.com> wrote:
> >
> > I have found several people using IDE disks on newer Award BIOSes have
> > trouble getting the boot-time probes and installation routines to recognize
> > the correct disk geometry.
> >
> > If anyone is running 3.0 (or 2.2.x) on a machine with Award BIOS using IDE
> > drives with LBA turned off in the kernel configuration, and if you have
> > trouble getting dmesg/boot probes to recognize the proper disk size, could
> > you test the attached patch for me?
> >
> > I would also like to find testers with ANY BIOS that reports a disk size
> > too small. I think my patch will correct most problems with IDE geometry
> > showing as smaller than it actually is. (I don't make any claims about
> > geometries being reported as too large, or SCSI disks...)
> >
> > Thanks to anyone who can help.
> >
> > Andrew Sherrod
> >
> > P.S. I know this is not a really big problem, but it always seemed a bit
> > insulting that FreeBSD had to rely on DOS boot sectors to get the correct
> > disk geometry. I would rather that we could identify the correct geometry
> > without having to rely on another OS.
> >
> > And, face it, for newbies and those not terribly computer literate, getting
> > the right geometry during installation is a very nice feature. It is rather
> > disheartening for a new-comer to find out that their new operating system
> > can't even identify the correct disk geometry.
> >
> >
> >
> >
> > _________________________________________________________
> > DO YOU YAHOO!?
> > Get your free @yahoo.com address at http://mail.yahoo.com
> > >
> > -------------------------------------------------
> > PR: i386/9431
> > -------------------------------------------------
> >
> > -------------------------------------------------
> > Patch for 2.2.8 (May also workfor 2.2.6/2.2.7)
> > -------------------------------------------------
> >
> > *** wd.c.2_2_8 Wed Jan 13 21:07:30 1999
> > --- wd.c.original.2_2_8 Wed Jan 13 21:08:24 1999
> > ***************
> > *** 113,122 ****
> > #define WDOPT_FORCEHD(x) (((x)&0x0f00)>>8)
> > #define WDOPT_MULTIMASK 0x00ff
> >
> > - /* This bit mask is used to determine if the drive supports LBA
> > addressing. */
> > -
> > - #define WDCAP_LBA 0x02
> > -
> > /*
> > * This biotab field doubles as a field for the physical unit number on
> > * the controller.
> > --- 113,118 ----
> > ***************
> > *** 1731,1745 ****
> > du->dk_dd.d_nsectors = wp->wdp_sectors;
> > du->dk_dd.d_secpercyl = du->dk_dd.d_ntracks * du->dk_dd.d_nsectors;
> > du->dk_dd.d_secperunit = du->dk_dd.d_secpercyl *
> > du->dk_dd.d_ncylinders;
> > !
> > ! /* Check for BIOS LBA flag. This should allow kernel to determine
> > ! actual disk geometry for diffiuclt BIOSes.
> > ! This will likely only be of use during initial installation, or
> > ! perhaps when configuring a new drive. Otherwise, the disk geometry
> > ! should already be known. -A. Sherrod 01/13/1999*/
> > !
> > ! if ( ( (wp->wdp_capability&WDCAP_LBA) ||
> > ! (wp->wdp_cylinders == 16383 ) ) &&
> > du->dk_dd.d_secperunit < wp->wdp_lbasize) {
> > du->dk_dd.d_secperunit = wp->wdp_lbasize;
> > du->dk_dd.d_ncylinders =
> > --- 1727,1733 ----
> > du->dk_dd.d_nsectors = wp->wdp_sectors;
> > du->dk_dd.d_secpercyl = du->dk_dd.d_ntracks * du->dk_dd.d_nsectors;
> > du->dk_dd.d_secperunit = du->dk_dd.d_secpercyl *
> > du->dk_dd.d_ncylinders;
> > ! if (wp->wdp_cylinders == 16383 &&
> > du->dk_dd.d_secperunit < wp->wdp_lbasize) {
> > du->dk_dd.d_secperunit = wp->wdp_lbasize;
> > du->dk_dd.d_ncylinders =
> >
> > -------------------------------------------------
> > Patch for 3.0
> > -------------------------------------------------
> >
> > *** wd.c.3_0 Wed Jan 13 12:07:46 1999
> > --- wd.c.original.3_0 Wed Jan 13 11:17:54 1999
> > ***************
> > *** 130,140 ****
> > */
> > #define id_physid id_scsiid
> >
> > - /* This bitmask is used to determine if the BIOS flags showing LBA
> > support
> > - are active or inactive */
> > -
> > - #define WDCAP_LBA 0x02
> > -
> > /*
> > * Drive states. Used to initialize drive.
> > */
> > --- 130,135 ----
> > ***************
> > *** 1954,1973 ****
> > du->dk_dd.d_ntracks * du->dk_dd.d_nsectors;
> > du->dk_dd.d_secperunit =
> > du->dk_dd.d_secpercyl * du->dk_dd.d_ncylinders;
> > !
> > ! /* If BIOS specifies LBA mode is supported, but LBA
> > flags
> > ! are not set, check if wdp_lbasize is larger than
> > ! CHS size. If so, use the lba_size.
> > ! This should fix problems with certain BIOSes (e.g.
> > Award)
> > ! which do not report the correct size when using only
> > ! CHS calculations.
> > ! This will not force the use of LBA mode. It is only
> > ! used to determine disk geometry.
> > !
> > ! -A. Sherrod 01/13/1999 */
> >
> > !
> > ! if ( ( (wp->wdp_capabilities & WDCAP_LBA) ||
> > ! (wp->wdp_cylinders == 16383) ) &&
> > du->dk_dd.d_secperunit < wp->wdp_lbasize) {
> > du->dk_dd.d_secperunit = wp->wdp_lbasize;
> > du->dk_dd.d_ncylinders =
> > --- 1949,1955 ----
> > du->dk_dd.d_ntracks * du->dk_dd.d_nsectors;
> > du->dk_dd.d_secperunit =
> > du->dk_dd.d_secpercyl * du->dk_dd.d_ncylinders;
> > ! if (wp->wdp_cylinders == 16383 &&
> > du->dk_dd.d_secperunit < wp->wdp_lbasize) {
> > du->dk_dd.d_secperunit = wp->wdp_lbasize;
> > du->dk_dd.d_ncylinders =
> >
> > -------------------------------------------------
> > dmesg from 2.2.8 system before patch
> > -------------------------------------------------
> >
> >
> > Copyright (c) 1992-1998 FreeBSD Inc.
> > Copyright (c) 1982, 1986, 1989, 1991, 1993
> > The Regents of the University of California. All rights
> > reserved.
> >
> > FreeBSD 2.2.8-RELEASE #6: Wed Jan 13 21:11:20 EST 1999
> > r...@hal9000.yaldabaoth.com:/usr/src/sys/compile/HAL
> > CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
> > Origin = "AuthenticAMD" Id = 0x580 Stepping=0
> > Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> > real memory = 201326592 (196608K bytes)
> > avail memory = 194924544 (190356K bytes)
> > Probing for devices on PCI bus 0:
> > chip0 <generic PCI bridge (vendor=1106 device=0597 subclass=0)> rev 4
> > on pci0:0:0
> > chip1 <generic PCI bridge (vendor=1106 device=8598 subclass=4)> rev 0
> > on pci0:1:0
> > chip2 <generic PCI bridge (vendor=1106 device=0586 subclass=1)> rev
> > 65 on pci0:7:0
> > pci0:7:1: VIA Technologies, device=0x0571, class=storage (ide) [no
> > driver assigned]
> > chip3 <generic PCI bridge (vendor=1106 device=3040 subclass=0)> rev
> > 16 on pci0:7:3
> > xl0 <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 48 int a irq 11
> > on pci0:10:0
> > xl0: Ethernet address: 00:10:5a:20:9b:68
> > xl0: autoneg not complete, no carrier (forcing half-duplex, 10Mbps)
> > Probing for devices on PCI bus 1:
> > Probing for devices on the ISA bus:
> > sc0 at 0x60-0x6f irq 1 on motherboard
> > sc0: VGA color <16 virtual consoles, flags=0x0>
> > sio0: configured irq 4 not in bitmap of probed irqs 0
> > sio0 at 0x3f8-0x3ff irq 4 on isa
> > sio0: type 8250
> > sio1 at 0x2f8-0x2ff irq 3 on isa
> > sio1: type 16550A
> > lpt0 at 0x378-0x37f irq 7 on isa
> > lpt0: Interrupt-driven port
> > lp0: TCP/IP capable interface
> > psm0 at 0x60-0x64 irq 12 on motherboard
> > psm0: model Generic PS/2 mouse, device ID 0
> > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
> > fdc0: FIFO enabled, 8 bytes threshold
> > fd0: 1.44MB 3.5in
> > wdc0 at 0x1f0-0x1f7 irq 14 on isa
> > wdc0: unit 0 (wd0): <QUANTUM FIREBALL SE8.4A>
> > wd0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
> > wdc0: unit 1 (wd1): <WDC AC33100H>
> > wd1: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
> > wdc1 at 0x170-0x177 irq 15 on isa
> > wdc1: unit 0 (wd2): <Maxtor 84320D4>
> > wd2: 1888MB (3866940 sectors), 4092 cyls, 15 heads, 63 S/T, 512 B/S
> > wdc1: unit 1 (atapi): <FX322M/w03>, removable, intr, dma, iordis
> > wcd0: 5512KB/sec, 256KB cache, audio play, 255 volume levels,
> > ejectable tray
> > wcd0: no disc inside, unlocked
> > mcd0 not found at 0x300
> > npx0 flags 0x1 on motherboard
> > npx0: INT 16 interface
> >
> > -------------------------------------------------
> > dmesg from 2.2.8 system after patch
> > -------------------------------------------------
> >
> >
> > Copyright (c) 1992-1998 FreeBSD Inc.
> > Copyright (c) 1982, 1986, 1989, 1991, 1993
> > The Regents of the University of California. All rights
> > reserved.
> >
> > FreeBSD 2.2.8-RELEASE #7: Wed Jan 13 21:26:09 EST 1999
> > r...@hal9000.yaldabaoth.com:/usr/src/sys/compile/HAL
> > CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
> > Origin = "AuthenticAMD" Id = 0x580 Stepping=0
> > Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> > real memory = 201326592 (196608K bytes)
> > avail memory = 194924544 (190356K bytes)
> > Probing for devices on PCI bus 0:
> > chip0 <generic PCI bridge (vendor=1106 device=0597 subclass=0)> rev 4
> > on pci0:0:0
> > chip1 <generic PCI bridge (vendor=1106 device=8598 subclass=4)> rev 0
> > on pci0:1:0
> > chip2 <generic PCI bridge (vendor=1106 device=0586 subclass=1)> rev
> > 65 on pci0:7:0
> > pci0:7:1: VIA Technologies, device=0x0571, class=storage (ide) [no
> > driver assigned]
> > chip3 <generic PCI bridge (vendor=1106 device=3040 subclass=0)> rev
> > 16 on pci0:7:3
> > xl0 <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 48 int a irq 11
> > on pci0:10:0
> > xl0: Ethernet address: 00:10:5a:20:9b:68
> > xl0: autoneg not complete, no carrier (forcing half-duplex, 10Mbps)
> > Probing for devices on PCI bus 1:
> > Probing for devices on the ISA bus:
> > sc0 at 0x60-0x6f irq 1 on motherboard
> > sc0: VGA color <16 virtual consoles, flags=0x0>
> > sio0: configured irq 4 not in bitmap of probed irqs 0
> > sio0 at 0x3f8-0x3ff irq 4 on isa
> > sio0: type 8250
> > sio1 at 0x2f8-0x2ff irq 3 on isa
> > sio1: type 16550A
> > lpt0 at 0x378-0x37f irq 7 on isa
> > lpt0: Interrupt-driven port
> > lp0: TCP/IP capable interface
> > psm0 at 0x60-0x64 irq 12 on motherboard
> > psm0: model Generic PS/2 mouse, device ID 0
> > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
> > fdc0: FIFO enabled, 8 bytes threshold
> > fd0: 1.44MB 3.5in
> > wdc0 at 0x1f0-0x1f7 irq 14 on isa
> > wdc0: unit 0 (wd0): <QUANTUM FIREBALL SE8.4A>
> > wd0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
> > wdc0: unit 1 (wd1): <WDC AC33100H>
> > wd1: 3020MB (6185088 sectors), 6136 cyls, 16 heads, 63 S/T, 512 B/S
> > wdc1 at 0x170-0x177 irq 15 on isa
> > wdc1: unit 0 (wd2): <Maxtor 84320D4>
> > wd2: 4120MB (8439184 sectors), 8930 cyls, 15 heads, 63 S/T, 512 B/S
> > wdc1: unit 1 (atapi): <FX322M/w03>, removable, intr, dma, iordis
> > wcd0: 5512KB/sec, 256KB cache, audio play, 255 volume levels,
> > ejectable tray
> > wcd0: no disc inside, unlocked
> > mcd0 not found at 0x300
> > npx0 flags 0x1 on motherboard
> > npx0: INT 16 interface
> >
>
> _________________________________________________________
> DO YOU YAHOO!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> >
> >
> Copyright (c) 1992-1998 FreeBSD Inc.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> FreeBSD 3.0-RELEASE #11: Mon Jan 18 19:53:18 EST 1999
> r...@hal9000.no_net.none:/usr/src/sys/compile/HAL_NEW
> Timecounter "i8254" frequency 1193182 Hz cost 3863 ns
> CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
> Origin = "AuthenticAMD" Id = 0x580 Stepping=0
> Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> real memory = 201326592 (196608K bytes)
> avail memory = 192839680 (188320K bytes)
> Probing for devices on PCI bus 0:
> chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x04 on pci0.0.0
> chip1: <PCI to PCI bridge (vendor=1106 device=8598)> rev 0x00 on pci0.1.0
> chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0
> ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on
> pci0.7.1
> chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
> xl0: <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 0x30 int a irq 11 on
> pci0.10.0
> xl0: Ethernet address: 00:10:5a:20:9b:68
> xl0: autoneg not complete, no carrier (forcing half-duplex, 10Mbps)
> Probing for devices on PCI bus 1:
> Probing for devices on the ISA bus:
> sc0 at 0x60-0x6f irq 1 on motherboard
> sc0: VGA color <16 virtual consoles, flags=0x0>
> ed0 not found at 0x280
> fe0 not found at 0x300
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
> sio0: type 8250
> sio1 at 0x2f8-0x2ff irq 3 on isa
> sio1: type 16550A
> lpt0 at 0x378-0x37f irq 7 on isa
> lpt0: Interrupt-driven port
> lp0: TCP/IP capable interface
> psm0 at 0x60-0x64 irq 12 on motherboard
> psm0: model Generic PS/2 mouse, device ID 0
> fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: 1.44MB 3.5in
> wdc0 at 0x1f0-0x1f7 irq 14 on isa
> wdc0: unit 0 (wd0): <QUANTUM FIREBALL SE8.4A>
> wd0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
> wdc0: unit 1 (wd1): <WDC AC33100H>
> wd1: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
> wdc1 at 0x170-0x177 irq 15 on isa
> wdc1: unit 0 (wd2): <Maxtor 84320D4>
> wd2: 1888MB (3866940 sectors), 4092 cyls, 15 heads, 63 S/T, 512 B/S
> wdc1: unit 1 (atapi): <FX322M/w03>, removable, intr, dma, iordis
> wcd0: 5512Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray
> wcd0: no disc inside, unlocked
> wt0 not found at 0x300
> mcd0 not found at 0x300
> matcdc0 not found at 0x230
> scd0 not found at 0x230
> ie0: unknown board_id: f000
> ie0 not found at 0x300
> ep0 not found at 0x300
> ex0 not found
> le0 not found at 0x300
> lnc0 not found at 0x280
> ze0 not found at 0x300
> zp0 not found at 0x300
> cs0 not found at 0x300
> adv0 not found at 0x330
> bt0 not found at 0x134
> aha0 not found at 0x134
> npx0 on motherboard
> npx0: INT 16 interface
> changing root device to wd0s1a
> fd0c: hard error writing fsbn 1 of 1-3 (No status)
> fd0c: hard error writing fsbn 761 (No status)
> fd0c: hard error writing fsbn 10 of 10-12 (No status)
> fd0c: hard error writing fsbn 22 (No status)
> >
> Copyright (c) 1992-1998 FreeBSD Inc.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> FreeBSD 3.0-RELEASE #10: Mon Jan 18 19:47:08 EST 1999
> r...@hal9000.no_net.none:/usr/src/sys/compile/HAL_NEW
> Timecounter "i8254" frequency 1193182 Hz cost 3863 ns
> CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
> Origin = "AuthenticAMD" Id = 0x580 Stepping=0
> Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> real memory = 201326592 (196608K bytes)
> avail memory = 192839680 (188320K bytes)
> Probing for devices on PCI bus 0:
> chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x04 on pci0.0.0
> chip1: <PCI to PCI bridge (vendor=1106 device=8598)> rev 0x00 on pci0.1.0
> chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0
> ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on
> pci0.7.1
> chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
> xl0: <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 0x30 int a irq 11 on
> pci0.10.0
> xl0: Ethernet address: 00:10:5a:20:9b:68
> xl0: autoneg not complete, no carrier (forcing half-duplex, 10Mbps)
> Probing for devices on PCI bus 1:
> Probing for devices on the ISA bus:
> sc0 at 0x60-0x6f irq 1 on motherboard
> sc0: VGA color <16 virtual consoles, flags=0x0>
> ed0 not found at 0x280
> fe0 not found at 0x300
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
> sio0: type 8250
> sio1 at 0x2f8-0x2ff irq 3 on isa
> sio1: type 16550A
> lpt0 at 0x378-0x37f irq 7 on isa
> lpt0: Interrupt-driven port
> lp0: TCP/IP capable interface
> psm0 at 0x60-0x64 irq 12 on motherboard
> psm0: model Generic PS/2 mouse, device ID 0
> fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: 1.44MB 3.5in
> wdc0 at 0x1f0-0x1f7 irq 14 on isa
> wdc0: unit 0 (wd0): <QUANTUM FIREBALL SE8.4A>
> wd0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
> Using A. Sherrod's patch of 01/18/1999.
> wdc0: unit 1 (wd1): <WDC AC33100H>
> wd1: 3020MB (6185088 sectors), 6136 cyls, 16 heads, 63 S/T, 512 B/S
> Using A. Sherrod's patch of 01/18/1999.
> wdc1 at 0x170-0x177 irq 15 on isa
> wdc1: unit 0 (wd2): <Maxtor 84320D4>
> wd2: 4120MB (8439184 sectors), 8930 cyls, 15 heads, 63 S/T, 512 B/S
> Using A. Sherrod's patch of 01/18/1999.
> wdc1: unit 1 (atapi): <FX322M/w03>, removable, intr, dma, iordis
> wcd0: 5512Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray
> wcd0: no disc inside, unlocked
> wt0 not found at 0x300
> mcd0 not found at 0x300
> matcdc0 not found at 0x230
> scd0 not found at 0x230
> ie0: unknown board_id: f000
> ie0 not found at 0x300
> ep0 not found at 0x300
> ex0 not found
> le0 not found at 0x300
> lnc0 not found at 0x280
> ze0 not found at 0x300
> zp0 not found at 0x300
> cs0 not found at 0x300
> adv0 not found at 0x330
> bt0 not found at 0x134
> aha0 not found at 0x134
> npx0 on motherboard
> npx0: INT 16 interface
> changing root device to wd0s1a
>
_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
*** wd.c Mon Jan 18 19:39:22 1999
--- wd.c.original Mon Jan 18 18:24:14 1999
***************
*** 120,131 ****
#define WDOPT_MULTIMASK 0x00ff
/*
- * This define is used to determine if the drive is LBA capable
- */
-
- #define WDCAP_LBA 0x02
-
- /*
* This biotab field doubles as a field for the physical unit number on
* the controller.
*/
--- 120,125 ----
***************
*** 516,523 ****
du->dk_dd.d_nsectors,
du->dk_dd.d_secsize);
- printf("Using A. Sherrod's patch of 01/18/1999.\n");
-
if (bootverbose) {
wp = &du->dk_params;
printf( "wd%d: ATA INQUIRE valid = %04x, "
--- 510,515 ----
***************
*** 1940,1960 ****
du->dk_dd.d_ntracks * du->dk_dd.d_nsectors;
du->dk_dd.d_secperunit =
du->dk_dd.d_secpercyl * du->dk_dd.d_ncylinders;
!
! /*
! * tThe following change determines if the disk
! * is LBA capable. If it is, and the lba size is
! * larger than the CHS size, use the LBA size.
! * This should allow certain difficult BIOSES
! * (eg. Award) which do not report the correct
! * CHS size to still give an accurate measure
! * of disk size,w ithout forcing the user to
! * enable LBA mode.
! * A. Sherrod (01/18/1999)
! */
!
! if ( ( (wp->wdp_capability & WDCAP_LBA) ||
! (wp->wdp_cylinders == 16383) ) &&
du->dk_dd.d_secperunit < wp->wdp_lbasize) {
du->dk_dd.d_secperunit = wp->wdp_lbasize;
du->dk_dd.d_ncylinders =
--- 1932,1938 ----
du->dk_dd.d_ntracks * du->dk_dd.d_nsectors;
du->dk_dd.d_secperunit =
du->dk_dd.d_secpercyl * du->dk_dd.d_ncylinders;
! if (wp->wdp_cylinders == 16383 &&
du->dk_dd.d_secperunit < wp->wdp_lbasize) {
du->dk_dd.d_secperunit = wp->wdp_lbasize;
du->dk_dd.d_ncylinders =
