in fxtv, i am still trying to sort out how to get sound from the video card
through the sound card.
current of 98.12.31
o hauppauge wintv plugged into cable
o awe-64
o matrox millennium ii agp
i think the problem is really on the video card, or the bt drivers.
o the awe-64 works fine with vat in multicast, as does the hauppauge with
a camera in vic.
o i have the line-out of the hauppauge plugged into the line-in of the
awe-64
o in fxtv, when i switch channels or change audio input select, i hear a
click through the speakers
clues solicited.
randy
FreeBSD 3.0-CURRENT #0: Sat Jan 9 11:05:57 PST 1999
r...@rip.psg.com:/usr/src/sys/compile/RIP
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 300682774 Hz
CPU: Pentium II (quarter-micron) (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping=1
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 134217728 (131072K bytes)
config> quit
avail memory = 128040960 (125040K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 15 on pci0.6.0
ahc0: aic
7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 15 on
pci0.9.0
fxp0: Ethernet address 00:a0:c9:df:c8:4e
bktr0: <BrookTree 878> rev 0x02 int a irq 10 on pci0.10.0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
Probing for devices on iicbus0: <80> <81> <a0> <a1> <c2> <c3>
smbus0: <System Management Bus> on bti2c0
smb0: <SMBus general purpose I/O> on smbus0
Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner.
Probing for devices on PCI bus 1:
vga0: <Matrox model 051f graphics accelerator> rev 0x00 int a irq 11 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL00c3 [0xc3008c0e] Serial 0x1fd0a682 Comp ID: PNPb02f
[0x2fb0d041]
pcm1 (SB16pnp <SB16 PnP> sn 0x1fd0a682) at 0x220-0x22f irq 5 drq 1 flags 0x15
on isa
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff i
rq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
pcm0 not probed due to drq conflict with pcm1 at 1
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wl0 at 0x300-0x30f irq 7 on isa
wl0: address 08:00:6a:2b:dd:a7, NWID 0xaaaa
npx0 on motherboard
npx0: INT 16 interface
ccd0-5: Concatenated disk drivers
Waiting 15 seconds for SCSI devices to settle
changing root device to da0s1a
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST34573LW 5702> Fixed Direct Access SCSI-2 device
da1: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34573LW 5702> Fixed Direct Access SCSI-2 device
da0: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
cd0 at ah
c0 bus 0 target 4 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 20.0MB/s transfers (20.0MHz, offset 16)
To Unsubscribe: send mail to majord...@freebsd.org
with "unsubscribe freebsd-current" in the body of the message
